1 H.P 115V Thru Bolt Motor No Base W/ Cord - PL1131



Part # PL1131

By PureLine

  5 Average  



Part # PL1131

Product Description

PureLine 1 HP Replacement Pool Motor. Cord Included!

Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL1102 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 1 HP pool pumps.

This Motor is Commonly Used On the Following Pumps...

  • PureLine Pure Flow PL1600
  • Splash Pool Appliance
  • Splash
  • Blue Wave
  • Bridging China SF Series
  • Reliant
  • Doheny's

The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction the PureLine replacement motor is backed by a full 1-year warranty.

When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.

When replacing your motor we highly recommend replacing your shaft seal to ensure no leaking.

Product Specifications

1 HP
3450 RPM
Service Factor:
48 Thru Bolt

?     Asked on 6/14/2021 by Rebecca Collins

Can i use this as a replacement on a Hayward Super Pump?

A  Answered on 6/15/2021 by InyoPools Product Specialist Danny R.

No this should not be used on the Hayward Super Pump.  Here is a link to the appropriate replacement motors for your Super Pump. Make sure you use the correct HP...Hayward Super Pump Motors

?     Asked on 2/16/2021 by DONALD WHITFIELD


A  Answered on 2/17/2021 by InyoPools Product Specialist Hector F.

Hi Donald, yes this motor is compatible with the pump model 72743. You also may need a generic shaft seal PSR200

?     Asked on 4/19/2017 by


A  Answered on 4/19/2017 by InyoPools Product Specialist Scott W.

That motor is a Pureline product which is INYO's brand so the 1 year warranty with go through INYO if anything were to happen in the first year.

?     Asked on 8/8/2016 by Jerry Padilla

will this pump work on a magnum force pump? the current motor specs are as follows. Emerson 1HP, SF 1.4 volts 208-230/115 hz 60, rpm 3450, PH 1, Frame 56J, ROT CCW drive end, shaft 7/16-20 thread.

A  Answered on 8/16/2016 by InyoPools Product Specialist Lennox H.

Hi Jerry, This motor will not work as a replacement, you need the Century B128 Motor along with the Jacuzzi Magnum Tune Up Kit (GOKIT14).

?     Asked on 8/7/2016 by earnien1

can this pump replace dynamo model#193262

A  Answered on 8/16/2016 by InyoPools Product Specialist Lennox H.

Hi, This motor is no longer available but could have been used, you will need the BN25 motor along with the Dynamo Tune Up Kit (GOKIT46).

?     Asked on 8/1/2016 by stephen l cuthbert

will this motor work on a reliant model bc2748

A  Answered on 8/5/2016 by InyoPools Product Specialist Lennox H.

Hi Stephen, This motor will not fit on the Reliant BC2748 pump, we do not have the replacement motors for that pump.

?     Asked on 6/24/2016 by Tammy

Will this work with Hayward E series Model E1001542S?

A  Answered on 7/1/2016 by InyoPools Product Specialist Lennox H.

Hi Tammy, This motor can work with the pump on the Hayward E series Model E1001542S.

?     Asked on 6/20/2016 by perry

will this motor mount to an above ground pool pump?? It looks identical to the one i have. My pump is a Hayward. It has 4 thin bolts that goes thru and fastens to the pump.

A  Answered on 6/25/2016 by InyoPools Product Specialist Alex V.

Perry, This motor will only fit on certain above ground pool pumps since it does not have a base.

?     Asked on 6/15/2016 by

Will this motor work for a Hayward pump SP2602X10 ID21120612001397020 ?

A  Answered on 6/16/2016 by InyoPools Product Specialist Lennox H.

Hi, This motor will not work with the Hayward pump SP2607X10, UST1102 motor is the correct motor. When replacing the motor we recommend getting the Hayward Super Pump Tune Up Kit p/n GOKIT3 or GOKIT3SALT.

?     Asked on 6/12/2016 by chet milan

what does srervice factor mean ?

A  Answered on 6/12/2016 by InyoPools Product Specialist Matt S.

Service Factor is the multiplier that determines the total HP of a motor. The equation is Total HP = HP x Service Factor. In this case 1 HP x 1 SF = 1.

?     Asked on 6/11/2016 by

what does service factor mean

A  Answered on 6/29/2016 by InyoPools Product Specialist Alan M.

Service Factor is the multiplier that determines the total HP of a motor. The equation is Total HP = HP x Service Factor. In this case 1 HP x 1 SF = 1.


Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews