Part # PL1506
Warranty 1 Year
Same quality as Hayward®, Sta-Rite® and Pentair®!
The PureLine Pure Pro XL is a powerful above-ground pump featuring a corrosion proof construction that delivers years of reliable service. This Pure Pro XL is high performance pump that is quiet, efficient and all of this at an affordable price. The top discharge design fits most filters making installation a snap and its extra large clear lid allows for easy cleaning. Replace your old inefficient pump with this water moving dynamo.
Dual Speed Means Low Operational Costs - up to 70% less
This pump is a dual speed pump meaning that it has super low operational costs. Dual speed pumps have a switch that allows you to run the pump at a high speed of 1 HP or you can switch the pump to the low speed to operate at .28 HP. Normally you can run the pump at the low speed for your general filtration and when doing so this costs about 70% less than running at the high speed of 1 HP. The great thing is you have the high speed for things like vacuuming or if you get into a demanding algae situation.
California Title 20 Compliant
This pump is compliant with the California Title 20 energy efficiency laws.
Click here for 1.5" Quick Disconnect Unions for the Pure Pro XL Pump
Click here for Hose Connectors 1.5"
Click here for Pool Pump Timer for the Pure Fro XL Pump
Click here for the Inground Pool Version of this Pump
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
How many hours per day should I run my pump?
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
brand new in april.......all it does is humm ineither speed
Hello, I would confirm that you have the pump wired correctly-- the motor likely came factory set for 240v, but if you only have 120 running to it, that hum is the sound of the unit not having enough power to turn. If you have the motor wired to the correct voltage, it could also be a faulty start capacitor-- I would perform a multimeter test on the capacitor to confirm, but if the start capacitor is faulty, then it will also hum and cause the motor to not turn. Because the pump was a recent purchase, you should be able to get a replacement under warranty by calling our customer service number at 407-834-2200.