By Pureline
Part # PL2762
Pureline Generic Super II Pump™ Style Drive Train Upgrade Kit – 1.5 THP
Model: PL2762
Compatible with Hayward® Super II Pump Models
✅ Overview
This aftermarket drive train upgrade kit is designed for 1.5 THP Super II-style pumps. A cost-effective solution to refresh worn components and extend pump life.
✅ Common Pump Models
SP3010X15AZ – Super II 1.5 THP
W3SP3010X15AZ – Super II 1.5 THP
SP3010EEAZ – Super II Energy Efficient 1.0 HP Full Rate (1.5 THP)
✅ Kit Contents
Impeller (compatible with SPX3010-C)
Diffuser (compatible with SPX3000-BN)
Diffuser Gasket (compatible with SPX1600R)
Housing Gasket (compatible with SPX3000T)
Seal Plate (compatible with SP3020-E)
Motor Mounting Plate (compatible with SPX3000F)
Impeller Ring (compatible with SPX3005R)
Shaft Seal (compatible with SPX1600Z2 / PS-201)
⚠️ Important Notes
This is a non-OEM aftermarket kit
Always replace shaft seals during motor replacement to avoid leaks
Not for use with other Hayward® models not listed above
⚠️ Disclaimer:
All brand names and part numbers are used for reference purposes only. Pureline products are not manufactured or endorsed by Hayward®.
Salt Pool. Hayward Super II 2 HP. Century Pump Motor
ST1202 2.64 total max hp
2.0 HP
Mod# K48N2N106C1
Ser# 24814CH
RPM 3450
FR 56J
HZ 60
Volts 208-230
Will this Drive Train work with this unit?
Reply
Unfortunately, no, it is not correct for your total HP. In your situation, it is best to remove the old impeller and diffuser and check for the molded part numbers as they change based on the years of manufacturing. Super II Parts Page https://www.inyopools.com/pool_parts_hayward_super_2.aspx?Keywords=super+two+parts
Reply