I have a Magnum Force 2HP Pump that is dated after 2004. I had to buy a new Jacuzzi motor last Summer and the motor is 2.65 HP. I my current Pump is not repairable, so I need to buy a new one. Should I get a 2.50 HP Pump or stay with a new 2HP pump
Reply
If you currently have a 2.5HP pump I would recommend seeing if your set up is going to function fine if you decrease the flow rate by purchasing a 2HP pump.
Reply
7-184949-22 1.5 hp (1.10 sf ) 230/115 3450 rpm jacuzzi pump looking to replace this unit. Jacuzzi 15UMF-S both units will the above work for me.
Reply
How many GPM does the magnum force Jacuzzi put out?
Reply
Hello Mark, depending on feet to head which you can run calculations for your personal feet of head under "How Do I Calculate Feet of Head for My Pool?" Once you figure your feet of head, according to 2HP Magnum Force GPM 2.0 HP would be 108 GPM for 40ft, 99 GPM for 50ft, 90 for GPM for 60ft, 80 GPM for 70ft, 69 GPM for 80ft, 51 GPM for 90ft, and 31 GPM for 100ft.
Reply
How many GPM's does the 2 hp jacuzzi magnum force pump put out?
Reply
Hello Mark, depending on feet to head which you can run calculations for your personal feet of head under "How Do I Calculate Feet of Head for My Pool?" Once you figure your feet of head, according to 2HP Magnum Force GPM 2.0 HP would be 108 GPM for 40ft, 99 GPM for 50ft, 90 for GPM for 60ft, 80 GPM for 70ft, 69 GPM for 80ft, 51 GPM for 90ft, and 31 GPM for 100ft.
Reply
The unit I need to replace has a 2HP, 115/230v, dual speed motor. Is your motor 2 speed??
Reply
Hi, David. The Magnum Force Pump 2 HP Dual Speed Pump - 94027220 is a special order item with a 3 week lead time.
Reply
Why is this pump with the dual speed motor so much more expensive? $399 for the single speed vs. $721 for the two speed!!!
Reply
Hi, David. The complete dual speed pump is a special order item. They are additional fees associated with special order items such as the Magnum Force Pump 2 HP Dual Speed Pump - 94027220.
Reply
i need to replace a pool motor plus pump.
The motor is a Century Centurion and the pump is a Jacuzzi - Magnum Force.
The manufactures label for the motor shows 2.0 HP, but there is also a label that shows Total HP = 2.4.
Question - what actual HP do i need? Thanks
Reply
Yes if you have a 2hp motor with a higher Service Factor then you would go with this unit. You can also go with Magnum Force V Series 2.7HP Variable Speed Pump (VMF-S2) - 94026140
Reply
I have a 2 hp Carvin pump that the previous owner allowed to freeze and bust. Can I order just the pump and housing since the motor seems ok?
Reply
Hello, yes you could just replace those parts. I also recommend checking if your impeller and diffuser are in good condition. If they are not, you will have to get the ones based off of the motor that you are using.
Reply
I have a 94027125 jacuzzi pump with a ust1202 2hp motor , will the 94027120 replace my unit successfully?
Reply
If your pump using the motor model ust1202 has been working successfully then yes this replacement pump would work.
Reply
Woke up this morning, no pool running. Main pump tripped breaker, yikes not good timing! It is a Jacuzzi Magnum Force 2hp unit (2UMF-S), been leaking on the bottom for some time and finally shorted out the motor. The unit I want to order from you looks like a direct replacement...can you confirm? This one lasted 13 years so going with same seems a safe bet.
Reply
Yes, you are correct. This is the current replacement for the same model pump that you have.
Reply
I just installed 2hp magnum force pump I purchased. It keeps popping the breaker in my panel. What size breaker should it be running on. My previous pump was only 1hp was told it was 2hp. Is it possible that I need to upgrade my breaker
Reply
Hi, John. You will need a 25-30 amp breaker to operate this pump.
Reply
I need to replace a Jacuzzi pump part number 8-184951-02 Type CX. It was installed in 1991 for the side spa at the pool. What part number replaces this pump?
Reply
Hi, Bob. You provided us with the Make of the pump and the motor number, we will now need the pump model or a picture of the housing..
Reply
I have a Jacuzzi spa pump at the pool that requires replacement. Model no. Is 8-184951-02. It is a Magnetek type CX. what system replaces this unit?
Reply
Hi, Bob. You provided us with the Make of the pump and the motor number, we will now need the pump model or a picture of the housing..
Reply
I need to replace my Magnum 2HP pump. Is there a replacement for the 94027120?
Reply
Hi EC, We would suggest the 2 HP PureLine Prime as great replacement pump for the Jacuzzi Magnum, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing.
Reply
need to replace jacuzzi mag force pump #34227115. 04/jun/99, aparrently has been discontinued, what should I get?
Reply
Hello Patricia, thank you for contacting INYO POOLS. Based on the model you had we would recommend the Waterway Champion 2.0 HP Full Rate EE Pool Pump - CHAMPE-120. This unit would match the gallons per minute specs of the Carvin Magnum Force Pump 2 HP Pump.
Reply
