?     Asked on 6/29/2008by Guest

Where can I find the replacement bulb for this light as well as dimmensions on the replacement bulb? Also can I replace the bulb in my Swimquip light with a color changing LED bulb?
 Reply

A  Answered on 6/29/2008 by InyoPools Product Specialist Patrick P.

Here is a link to the replacement bulb for the swimquip light (120V 500 Watt - NA706) http://www.inyopools.com/Products/00100001005427.htm This page shows dimmensions of the bulb and you may purchase this bulb directly through the link above. Unfortunately at this time there is not a LED replacement bulb available for the swimquip light, all of the current LED replacement bulbs are too large for the Swimquip housing.
 Reply


?     Asked on 9/23/2010by Guest

What are the dimensions of this light?
 Reply

A  Answered on 9/23/2010 by InyoPools Product Specialist Patrick P.

Total front to back, 7-1/2" (from front of the lens to the back of the light); Front to back, 6-5/8" (Just the copper shell of the light); 8-1/2" wide on the faceplate; 3-3/4" wide at the back of the shell.
 Reply


?     Asked on 7/4/2011by Guest

I have an old Anthony pool light in my pool which needs to be replaced, I believe the Anthony light may have been discontinued, do you have a suitable replacement?
 Reply

A  Answered on 7/4/2011 by InyoPools Product Specialist Patrick P.

> >The Anthony light has indeed been discontinued and the Swimquip light fits most old Anthony pools underwater lights. The Swimquip light measures 8-1/2" outside diameter, Front of lens to back of light 7 1/2" and shell rear diameter measures 3 - 3/4"
 Reply


?     Asked on 2/28/2012by Guest

Will this bulb fit my Sta-Rite Swimquip light.
 Reply

A  Answered on 2/28/2012 by InyoPools Product Specialist Patrick P.

Yes. The J & J pure white bulb will fit the Sta-Rite Swimquip lights. Please make certain to order the correct  >replacement gasket for the Sta-Rite Swimquip light. The J & J pure white bulbs come with a gasket for the >Pentair Amerilite.
 Reply


?     Asked on 12/17/2014by Inyo Visitor

I took out a Swimquip No. 5075,(out of a pool that was converted to salt setup) at the bottom it says for freshwater only. Is this light a proper replacement ? Is this light OK for a salt setup ?
 Reply

A  Answered on 12/18/2014 by InyoPools Product Specialist Robert M.

We could not cross reference model number 5075. Model 05086-0100 is the correct replacement if you have a 500 watt 120v Swimquip pool light. The 05086-0100 will work in a saltwater pool.
 Reply


?     Asked on 5/25/2016by Beatriz

Is this a 6 inches? I need the light for my pool that is very small on the back
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Alex V.

Beatriz, This light is approximately 7.5". What model light are you replacing?
 Reply


?     Asked on 5/26/2021by Jessica Castillo

Since this is discontinued, do you have a similar fixture online with these same dimensions?
 Reply

A  Answered on 5/27/2021 by InyoPools Product Specialist Patrick P.

Hi Jessica, This J&J Swimquip Replacement LED Color Changing Light Fixture 120V is the only light fixture that will replace your current light. It will upgrade your light to LED and Color Changing.
 Reply