I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
Does 4700-0 come complete with gaskets, threaded fittings for inside the filter?
Reply
The 4700-0 is a complete valve (gaskets installed inside). It does not come with any fittings since it can fit several different filters.
Reply
We have a Hayward vari flo valve No. SP0710XEALL with the serial no.21120801006748026. We need to replace the top. Do you sell these or the whole replacement? Regards Bill.
Reply
I have a Haywood Micro Clean DE Filter. The handle on the valve (SP-710FL) broke...Valve # 715XR50-2 Multiport....can I purchase just the handle?
Reply
Hi Arlene, The Valve Handle (SPX0715F) would be the correct replacement handle for the SP715XR50 Multiport Valve.
Reply
Hi,
My six way valve says SP 710, rated press 50 psi, 75 gpm. It is connected to a Hayward S-240 filter. Which one do I need to replace it: SP710 X 32 or SP710 X 62 ?
Tx
Reply
Can I buy just the key assembly and gasket for sp 710xr50
Reply
Yes these parts can be purchased seperately. Here is the diverter for the SP0710XR50 and here is the spider gasket for the SP0710XR50
Reply
I have a 300 lb sand filter Hayward 1 1/2 inch ports my valve is starting to fail but it’s old and I can not read the part numbers. Will this valve work.
Reply
Is your filter a side-mount or top mount valve style? Also, do you know how old your filter may be?
Reply
I have a s200 sand filter. The handle is stuck. I took it apart and there is sand that I cannot dislodge. The part off of the top of the variflo is SP-710X-B. I cannot find the exact part number on your site. Can you help?
what will replace a Hayward Vari-Flow-Valve model #SP711?
Reply
Timothy, There are a few different valves that will replace it. In order to recommend the correct one, we will need to know which model filter tank you have.
Reply
