Do U have in stock a filter pressure gauge for Hayward model CC15093S has a back mount gauge
Reply
The backmount pressure gauge you are looking for is going to be 4727-0. That will fit you Hayward X-Stream filter.
Reply
Looking for a back mount gauge for filter sp710xr50
Reply
Nicl- The 4810-75 Pressure Gauge w/ Dial Hayward Oem Back Mount will work for you valve or you can go with a generic Back Mount Pressure Gauge 0-60 1/4" NPT REAR/BACK (102D-204D) part# 4727-0.
Reply
Just received a new DE filter. Along with it came this 3 setting dial. For the past 33 years a single dial was installed. What does each dial represent?
Black
Red
green
Reply
So the green location is the ideal low PSI for the filter, the red location is the max PSI and the black is where the PSI is currently at.
Reply
Can you tell me what other O rings or parts I should replace when buying and replacing this gauge for my EC65? Also what the difference between a EC65 and a EC65A ?
Thank You
Reply
Hello, Will this fit a Hayward Perflex EC75 filter? My gauge is housed in an adapter that screws into the side of the filter Housing.
The gauge has failed and the current gauge looks quite similar but does not have the red and green adjustable arms. I like the idea of having them. Also would need appropriate O-ring.
Hi Chris, yes this pressure gauge will work on the Hayward Perflex D.E. filter and you will not need an o ring there.
Reply
