What is the height to the center line of the input port on the end of the housing?
Reply
Jon, From the center of the inlet to the base of this pump hosing is 9.5". If you need any other specs here's the owners manual.
Reply
Does hayward make a replacement housing for the SPX3020AA?
Reply
Hi, Ron, The Super II Strainer Housing 2in (SPX3020AA) would be the replacement.
Reply
need to replace northstarcaseing hace bad leaks on the plastic. It is a older model IS4007A94 would you happen to have one. Thanks Bill Johnson
Reply
The model number you provided did not reference your pump, but if you have a Hayward Northstar 1998 to 2007 Parts or the Hayward Northstar Pump, 2008 to Current Parts, you can click on the respective pump you have and view the part list.
Reply
Is this the replacement for SPX4020A?
Reply
Hi, Will. Yes, this NorthStar Housing Kit w/ Unions - SPX4000HSGKIT is the correct replacement.
Reply
I have attached photos of my current pump housing. it was installed in Apr of 2004. the tag on it is worn and I can't find a model # anywhere in my paperwork from when i put the pool in. my housing now has a big crack where it meets the pump motor. is this the right replacement for my housing? also the picture shows a different lid than my current one. is that included? are there any other parts I will need?
Hi, Joe. Yes, this NorthStar Housing Kit w/ Unions - SPX4000HSGKIT is the correct part you will need. It includes all the part to make the conversion from the old style to the new style.
Reply
Item SPX4000HSGKIT says "out of stock for the season" on your web site. Do you expect to get more, and if so, around what time of the year would you normally get them? Thanks.
Reply
Hello Phil. I would say check back around the beginning of the 2021 pool season. perhaps around April or May.
Reply
