Please let me know how to remove VAL-PAK V38-131 Impaller from the pool motor. What steps I need to take.
Reply
For a quick reference on how to remove a pool pump impeller, review out how-to guide: How To Replace A Pool Pump Impeller.
Reply
Please tell me how to remove the seal plate 5106-210 REPLACEMENT SEAL PLATE ONLY - (BLACK) REPLACES 39004910 from the old motor to put to the new motor.
Thank you very much
Thai
Reply
Hi, Thai. The steps provided in our How To Replace a Sta-Rite Max-E-Pro Pump Impeller are similar to those of your pump. These step will provide you with the instructions you need.
Reply
I am trying to replace my impeller and seal plate. Your pt # 5106~232 says this replaces # 39005110,, my part has # 390051 on it Is this the correct impeller pt # ? The pt # for the Seal Plate is 5106-210 says replaces # 39004910 is this the same as #390049?
also need a shaft seal, is the correct shaft seal # PS-1000?
Reply
Hi, Mike. Those are the correct replacement part based on the original part numbers. The Ultra Flow pump does use a PSR-1000 Pump Seal.
Reply
What type of seal kit do i need for an Ultra Flow Seal plate as I replace the motor?
Reply
Hello Edmund. The Tune Up Kit American Ultra Flow & Bronze Pump - GOKIT20 contains the necessary seals and gaskets to complete the project. Attached please find the American Products Ultra-Flo exploded parts diagram for reference.
Reply
Is this the same as part number 357142?
Reply
Hello Kevin. Pentair has discontinued the original part. The Seal Plate (357142) - Shaft Seal Not Included is an after-market replacement. The shaft seal Pump Shaft Seal 5/8" - PS-1000 or heavy-duty shaft seal Pump Shaft Seal PS-1000, Heavy Duty (Saltwater Pools) would need to be ordered separately.
Reply
