Hayward Super 2 EE Pump 3 HP Single Speed

PART#SP3025EEAZ

MANUFACTURERHayward Pool Products

  (5 out of 5 Stars on 1 Ratings)
Ask us a question regarding SP3025EEAZ

item is in stock

includes free shipping

Description Documents2 How To's10 FAQs10 Parts2 Reviews1

Back To Top

Product Description

Specs:

  • Voltage = 230
  • Pipe Size = 2"

Applications

  • In-ground pools of all types and sizes (including in-floor cleaning systems, solar heating systems, water features)
  • In-ground spas or in-ground pool/spa combinations
  • Fountains

Hayward Super 2 Pump Features

  • Self-priming (suction lift up to 8' above water level)
  • Easy thread design makes strainer cover removal easy
  • Lexan® see-thru strainer cover lets you see when basket needs cleaning
  • 180 cubic inch basket has extra leaf-holding capacity. Load-extender ribbing ensures free flowing operation
  • All components molded of corrosion-proof PermaGlass XL™ for extra durability and long life
  • Heavy-duty, high performance motor for quieter, cooler operation
  • Service-ease design gives simple access to all internal parts
  • Includes Pump Lid removal tool

Hayward Super 2 Pump Warranty

1 Years Housing
1 Year Motor and Parts

Hayward Super 2 Performance Data

  Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)
Model No. Max Rated Model No. Full Rated 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft
SP3005X7AZ   52 43 30 13 - -
SP3007X10AZ SP3007EEAZ 78 67 56 38 - -
SP3010X15AZ SP3010EEAZ 96 87 73 60 36 -
SP3015X20AZ SP3015EEAZ 118 107 94 79 60 18
SP3020X25AZ SP3020EEAZ 138 125 112 96 75 43
SP3025X30AZ SP3025EEAZ 161 150 137 123 106 84
  SP3030EEAZ 161 150 137 123 106 84

Motor Performance / Amp Draw - Standard Pump Vs. Energy Efficient

Model No. HP Voltage Motor Type Amp Draw @ 115V Amp Draw @ 230V Service Factor
SP3005X7AZ 3/4 115/230 Standard 11.0 5.5 1.0
SP3007EEAZ 3/4 115/230 Energy Efficient 13.0 6.5 1.46
SP3007X10AZ 1 115/230 Standard 15.0 7.5 1.1
SP3010EEAZ 1 115/230 Energy Efficient 14.6 7.3 1.5
SP3010X15AZ 1 1/2 115/230 Standard 18.6 9.3 1.0
SP3015EEAZ 1 1/2 115/230 Energy Efficient 19.4 9.7 1.35
SP3015X20AZ 2 115/230 Standard 21.6 10.8 1.0
SP3020EEAZ 2 230 Energy Efficient -- 10.0 1.25
SP3020X25AZ 2 1/2 230 Standard -- 11.2 1.0
SP3025EEAZ 3 230 Energy Efficient -- 14.4 1.4
SP3025X30AZ 3 230 Standard -- 14.4 1.15
SP303063AZ 3 230/460 Energy Efficient 14.8 @ 230V 9.0 @ 460V 1.12

Click here for more Hayward Pool Pumps

HP:
3 HP
Speed:
Single
Volts:
230 V
Pipe Size:
2 in.
Documents

Hayward Pumps Super II Manual (78.86 KB)

Recommended wire gauge for motors (111.76 KB)

Please feel free to view our complete library of owners manuals.

Product FAQs

2/29/2012

Q:Can I replace my 1.5HP motor with a 1HP?

A:Yes. You can downgrade the motor. You will also have to downgrade the impeller, diffuser and eye seal (if applicable) as well.

2/13/2012

Q:I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!

A:You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.

2/13/2012

Q:I need a pump for an outdoor garden system. I don't want to filter the water as I want all nutrients flushed through my planting bed. Can I run a pool pump without a filter so I can achieve this? Thanks.

A:You can use a >pool pump for quite a few different applications as long as there is enough water to "feed" the pump. You will want to pay attention to the flow rate of the pump (gallons per minute). You do not need a filter in order to use it. Please note that while the pump strainer basket will help catch moderate-large sized debris, smaller debris will pass and may lodge itself by the impeller. The type of pool pump you will need will be dependent upon your  application. An above ground pool pump needs to be installed below the water surface and an inground pool pump needs to be installed above the water surface. The warranty may/may not be affected and it's a good idea to contact the manufacturer to find out.

1/30/2012

Q:What parts on my pool pump can I replace before I have to buy a new pump?

A:You can extend the life of your pump 10 or 20 years by replacing worn parts. These include the motor and motor shaft seal, 3 gaskets, the strainer basket and cover, the impeller and diffuser. Click our guide on "How a Pool Pump Works" to see where these parts are located in a typical motor. See our other pump guides for step-by-step procedures on replacing these parts.

1/30/2012

Q:How do I check my pool pump's impeller to see if its bad?

A:Your pump's impeller may be cracked or worn and wobbling or just clogged. To look at or replace your impeller see our guide on "How to Replace a Pool Pump Impeller". For information on how a pump works, see our guide on "How a Pool Pump Works".

1/25/2012

Q:How do I change the shaft seal on my pool pump?

A:Changing the >shaft seal is quite simple. Here's > >How To Replace a Pool Motor Shaft Seal.

1/25/2012

Q:How do I change the motor on my pool pump?

A:Changing the motor on a pool pump is not that difficult. Here's a video on How to Replace a Pool Pump Motor. In addition to the video you can read our step by step guide here  Make certain that you purchase the correct shaft seal or Gokit to go with your new motor.

1/23/2012

Q:I have a leaking pool pump that seems to be getting louder when it turns on. I made sure everything is clear inside of the basket. How do I know it's just the motor? Please help.

A:If you have a leak, it is more than likely caused by a failed shaft seal. Once the shaft seal fails water is able to enter the motor body and cause damage to the bearings. Typically it will cause the motor to run louder than normal and the motor will eventually fail. Your most cost effective option would be to replace the motor and the surrounding seals/gaskets. You can purchase the >shaft seal alone, but it is recommended you purchase a  >GoKit. A Gokit contains the shaft seal, housing gasket, lid gasket, diffuser gasket and non petroleum based lubrication.

1/19/2012

Q:I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?

A:Replacing a pool pump motor is not as difficult as it seems. You can try looking >here >  >if you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label >here.

1/18/2012

Q:Are all Hayward Tristar Pumps considered variable speed?

A:>No, The only variable speed TriStar pump is model#: SP322063EEV. This pump requires either the SP3220VSC - TriStar Energy Solution Control stand alone control, or the SP3220VSCAQL - TriStar Energy Solution Control for Pro Logic

Customer Reviews

Ratings Summary

Average Rating:   (5 out of 5 Stars)

Recommended: (100%) 1 of 1 customer would recommend this product to a friend.

1 Rating 5 star:   (1) 4 star: (0) 3 star: (0) 2 star: (0) 1 star: (0)

Write A Review

The Most Helpful Review

3 of 3 people found the following review helpful:

   (5 out of 5 Stars) Quiet pump

Reviewed By: from Boca Raton, FL ()

Pros: Quiet

The pump is really quiet

Was this review helpful to you? Yes - No