PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Sta-Rite


Details

Top

Part # P6E6F207L

Manufacturer Code P6E6F-207L

Alternate Part #'s PENP6E6F-207L

Product Description

Inyo Recommended Pumps

MAX-E-PRO PUMPS By Sta-Rite

SUPERIOR HYDRAULIC DESIGN MOVES MORE WATER, RESULTING IN LOWER ELECTRICAL COSTS

This new high efficiency, low maintenance pump is designed for maximum performance for the modern pool. Advanced state-of-the-art hydraulics means that Max-E-Pro delivers more water resulting in lower electrical costs. It will keep your pool crystal clear as well as run your automatic cleaner and any other hydraulic accessories around your pool. Not only is this pump energy efficient, it is ultra quiet. Special dampening in and around the pump’s base makes Max-E-Pro one of the quietest pumps in its class.



The extra large 6” trap collects more debris, allowing you to clean the trap less often. Our clear see-thru lid allows you to check for debris without removing the lid. The new Quick-Lock trap cover ring makes loosening or tightening the trap a cinch. Max-E-Pro is self-priming and produces enough suction to lift water 5-feet above pool level. Large 2” ports include external and internal threads to adapt to a variety of pipe sizes.

The Max-E-Pro is built to last, constructed of Sta-Rite’s glass reinforced resin that is corrosion-proof and can withstand many years of U.V. sunlight. This season, invest in the energy efficient, low-maintenance pump that really moves the water – Max-E-Pro by Sta-Rite. 110/230V UL Listed and NSF. Backed by a 1-Year Warranty.



 

Product Specs:

  • Voltage = 230
  • Max. Load Amps = 10.4
  • Horse Power = 1 1/2
  • Pipe Size = 2"

Click here for more Sta-Rite Pumps

Product Specifications

HP:
1 1/2 HP
Speed:
Single
Volts:
230 V
Amps:
10.4
Port Size:
2 in.
Service Factor:
1.47
Union Connectors:
Not included
Top

?     Asked on 12/4/2015by Christopher Mason

I have this pump, I need a replacement motor and o-ring set only. The 1.5hp motor that comes up on your site does not show it is for the Max_E_Pro and doesn't have the starter capacitor on top, the 2HP looks right and shows Max_E_Pro, but I'm not positive. What do I need? Thanks
 Reply

A  Answered on 12/4/2015 by InyoPools Product Specialist Lennox H.

Hi Christopher, The A.O. Smith 1 1/2 H.P Square Flange Full Rate Motor (SQ1152) and the Sta-Rite Max-E-Pro Tune Up Kit (GOKIT79) would be the correct replacement motor and kit for this pump.
 Reply


?     Asked on 7/1/2016by Irene Parrish

I bought this pump 6 years ago. it has been working fine until now. the pump will run fine for about 3 to 4 hrs and it kicks the breaker off and pump cuts off. The next day . I cut the breaker back on , it runs for a couples of hours and it kicks the breaker off and cuts off. I feels the pump and it feels hot. the breaker is a 20 amps. the electrician tested it and said the pump was pulling what it was suppose to. This is a 1 AND 1/2 hp pump . The pool is an in ground , 20,000 gal. Help!
 Reply

A  Answered on 7/3/2016 by InyoPools Product Specialist Alex V.

Irene, It sounds like the thermal overload or the capacitor can be the issue. You can try replacing the capacitor to see if resolves the issue.
 Reply


?     Asked on 8/16/2016by jake

what is the flow rate?
 Reply

A  Answered on 8/17/2016 by InyoPools Product Specialist Alan M.

The flow rate is defined as such: A term used to determine the amount of water that flows past a certain point within a specified amount of time. Gallons per minute is the usual measurement and is known as GPM. A 10,000-gallon pool with medium usage needs to have a flow rate of 20.8 gpm for proper turnover.
 Reply


?     Asked on 9/30/2016by Mike Fleming

I have a 22,000 gallon in ground pool , is this a good fit . Mike
 Reply

A  Answered on 9/30/2016 by InyoPools Product Specialist Megan C.

Hello, Mike. This may be a great pump for your pool size or it could be a bit of an overkill. I best recommend reviewing our How to Size a Pool Pump for Your In-Ground Pool guide and video.
 Reply


?     Asked on 12/13/2017by Lonnie Torbert

Here is what I have....... Sta Rite 1 1/2 HP Motor MPRA 61-148L Model # C48L2-PA 105 HP 1 1/2 KW 1.1 Volts 115/230 Motor seems OK but pump is Very Noise Do you have this motor/pump combination If So Cost
 Reply

A  Answered on 12/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Lonnie. The pump is not going to be noise unless something is trapped in it. The noise may be coming from the motor. We do have the replacement motor and parts but not the complete unit. The replacement motor and parts are listed on the Sta-Rite Dyna-Glas and Dyna-Max Parts Diagram page.
 Reply


Top

Review Summary

 (Average 4.41  out of 5 stars)
10 Rating
5 star:
 
(6)
4 star:
 
(2)
3 star:
 
(2)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews