$558.99
Part # B966T
Alternate Part #'s 187855T, AOSB966T, MGT-60-0966
3 HP Full Rate Two Speed Motor W/ Timer
NOTE: Image shown is of a Square Flange motor this motor is a Round Flange Motor
Premium-Efficiency 2-Speed Pool Motor with Integrated Timer
A. O. Smith’s new 2Green two-speed premium efficiency replacement pump motor with integrated timer packs tremendous value into an easy to- nstall package. Energy efficiency continues to drive the needs of the pool market, from legislation to increased awareness of energy costs and environmental impact. And thanks to the 2Green’s energy efficient high and low speed windings paired with an onboard timer interface, energy consumption can be reduced by as much as 58% over single speed motors. The all-in-one integrated motor and timer means less work for an installer and maximum energy savings for pool and spa owners. A. O. Smith’s 2Green is Title 20 compliant** and best of all, there is no additional wiring required for new construction or retrofit installations!
**California’s Title 20 legislation states that pumps > 1HP (total) must be 2-speed or variable speed, and must have a control to default to low-speed (i.e. timer)
Features | Benefits |
---|---|
All-in-one design with integrated motorand timer as one unit | No additional wiring required! – other aftermarket timers require external leads and can be wired incorrectly |
Rain-proof timer enclosure | Other aftermarket timers require a secondary enclosure for outdoor use of the electronics |
On-screen motor status updates | Unique feature that provides user feedback (if the shaft is locked for instance) which can reduce motor failures; shows the mode (high, low, off) and time remaining |
Built-in battery backup protects programming for 7 full years |
No need to replace battery (unlike other timers) or reset time/settings during a power outage or off-season |
Integrated LCD backlight and adjustable contrast |
Ensures the display can easily be viewed in dark, shady, or direct sunlight conditions |
Intuitive step-by-step screen instructions | Step-by-step instructions make initial setup and any future programming changes simple |
Manual override | User can instantly change motor parameters for cleaning or maintenance without adjusting permanent settings |
I currently have a AO Smith 3 HP B131 motor (SF 1.15, Y56J) that started getting very noisy (despite impeller replacement).
Would this fit? And hopefully save me energy? My pool is a pond that isn't very big (maybe 10,000 gallon)?
Reply
Yes, this motor will fit and has matching specifications and a low-speed option which may save you energy.
Reply
I am looking for a heavier duty pump for my inground pool. It has a 1 hp A.O. Smith Round Flange Up Rate Motor UST1102. I have had to replace it three times in just over 5 years. It has not been due to improper installation. I changed all the seals as well. It is a sorry product. Would this motor due a better job. Due you have any suggestions.
Reply
Hello, Unfortunately, we do not have a heavy duty motor for the UST1102.
Reply
I have the 2Green 2 speed pump where the controller is randomly
shutting off. The motor is running fine, can I just replace the user interface?
Thanks
Hi, Rob. Unfortunately, the controller is not available as a separate part.
Reply