Model # SP0573LN50
Dimensions 10-3/4" X 7-1/4" X 50'
Alternate Part #'s SP0573L50, SP573L50, _SP0573LN50, HAY-30-898, HAYSP0573LN50, SP573LN50
Available in a choice of attractive face rim models, from an injection-molded patterned design, made of rugged, non-corrosive glass-filled polypropylene; to a smooth, machine-polished stainless steel design, AstroLite Series light fixtures come standard in a wide range of voltages, wattages, and cord lengths to satisfy virtually any installation. Combined with Hayward's DuraNiche PVC niche, no other pool lighting system provides such value - all at the lowest installed cost.
Corrosion-free, thermoplastic or smooth, stainless steel face rim design
E-Z Lock clamp and reflector assembly for simple relamping
12 Volt, 100 and 300 Watt, 120 Volt, 300 and 500 Watt models for any installation
100% tested for safety and quality assurance
U.L. Listed for fresh water (Guide No. WBDT. File No E39338)
Can anyone identity this old Hayward fixture? Would the Duralite be the proper replacement?
Unfortunately, I am able to view the images up close. Are you able to reply back with images with a tape measure across the front of the faceplate showing the diameter and one down the side from the front of the faceplate measuring the depth to the end of the can? Do you see a label with a model or series number on it? What cord length, Volts, and Watts do you need?
I am replacing an SP-573-L fixture. Can I use this product as is or do I need a niche for it?
Yes, this Duralite series can replace your current series light. Just be sure to match your light voltage and cord length needed.
Is this a light in frame all inclusive so it's a one piece and do you sell this with a LED light with multiple colors
Is it possible to replace the light housing while using the existing electric cable?
You cannot use your existing light cable. You will need to pull the new cord through the conduit on the new light.