By Hayward Pool Products



Part # SPX2707Z2M

Warranty 1 Year

Alternate Part #'s K48A88A04, K48AA35A04, HAY-101-2732

Availability Special Order Item - Please allow 1 - 2 weeks for delivery.

Product Description

Replacement Motor Max-Flo II


?     Asked on 1/18/2012by Guest

Can you direct me to the proper hi low switch for this motor?

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.

?     Asked on 6/27/2016by Inyo Visitor

How much water dose it pump per hour

A  Answered on 6/29/2016 by InyoPools Product Specialist Joe S.

At an average of 30 ft of head you would be looking at 3,300 gallons per hour on high speed. And at low speed 1300 per hour.

?     Asked on 4/21/2017by kate

Can this 2-speed MaxFlo II bolt into the wet end of an old MaxFlo 1 HP single speed? My shaft seal needs to be replaced but if we were going to take it down it would make sense to get a two-speed option... Thanks in advance.

A  Answered on 4/24/2017 by InyoPools Product Specialist Scott W.

The Max Flo 2 has a square flange motor and the Max Flo has a round flange motor so you would not be able to put the motor from your Max Flo 2 on your Max Flo housing.

?     Asked on 6/1/2017by Inyo Visitor

Could I switch to a one speed of this motor I dont have a switch so its always only going one speed anyway

A  Answered on 6/1/2017 by InyoPools Product Specialist Hector F.

Yes, if your original 2-speed motor dies then you can just replace that motor with a single-speed.