By Jandy



Part # 1157

Alternate Part #'s 26-295-1006

Product Description

Jandy sets the benchmark for valves. For over 30 years Jandy valves have become synonymous with innovation, durability and quality. All Jandy valves pass 18 different quality control checks before leaving the factory.

Our workhorse diverter valve is as tough as the NeverLube, and requires no disassembly for lubrication. It comes with a 1-year warranty and a 20-year track record of proven reliability.


  • Grease cap eliminates need to disassemble valve for lubrication
  • Made from durable CPVC
  • Handle does not extend beyond the valve port – so it can’t interfere with other pool and spa equipment

Click here for more Jandy Valves

Product Specifications

Inside Diameter:
1 1/2 in.
2 Way
Outside Diameter:
2 in.

?     Asked on 1/23/2012by Guest

Why do the Jandy valves list ID and OD for each valve?

A  Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Each Jandy valve is designed to connect to two different size pipes. For example on a valve shown with ID 1 1/2" and OD 2", a 1 1/2" pipe can be glued inside the port or a 2" pipe can be glued on the outside of the port.

?     Asked on 9/23/2014by Guest

I have this valve installed at my pump. I have a lot of air coming out of the pool jets and it doesn't stop. If I rotate the valve to vacuum and back to skimmer, it clears the air immediately. Do you have any suggestions?

A  Answered on 9/23/2014 by InyoPools Product Specialist Patrick P.

I would recommend checking the gaskets/o-rings on the valve and pump housing. They may be letting air into the system.

?     Asked on 9/9/2015by Frank Parks

Do you sell the gasket for the Jandy 2 way diverter valve

A  Answered on 9/9/2015 by InyoPools Product Specialist Joe S.

Hello Frank the Jandy Never Lube 2/3 Port Valve O-ring Kit is part number APCK1166

?     Asked on 2/14/2016by Raymond Mejias

could you send me information on what position is the valve close or open

A  Answered on 2/15/2016 by InyoPools Product Specialist Christian R.

Looking at the link, the picture provided. The valve shows to be closing the port its pointing to. Wherever the molded "OFF" is pointing to. That would be the flow it is stopping. The only thing that is off is where the "off" is pointing to.


Review Summary

 (Average 4.25  out of 5 stars)
4 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews