$390.93
By Sta-Rite
Model # T200BP1
Sta Rite Cristal-Flo
Sand Filter
Press, twist, and relax
You won't burn many calories maintaining Cristal-Flo™ Top-Mount Filters.
A little two-way wrist action on the control valve puts the Cristal-Flo to work
cleaning itself. And, this is one workout routine you won't have to do very
often. Through innovative engineering, the filter's dirt-handling capacity is
maximized, which extends the time between cleanings (backwashing).
Features
Specifications
Product |
Filter
Area (Sq. Ft.) |
Tank
Port Size |
Sand
Required |
T-200BP-1 |
2.2 |
1.5" |
200 |
T-240BP-1 |
3.1 |
1.5" |
300 |
T-300BP-1 |
4.9 |
2.0" |
600 |
water after 2 weeks still cloudy, we put new sand 2years ago,i see sand on the ground when i backwash not a lot
Reply
Tom, Most of the time when you get sand back into the pool it is because of a Cracked Lateral or a Bad Spider Gasket. We have a good article on this topic here: Article on Getting Sand Back in Your Pool.
Reply
I am not seeing sand in the pool, i am seeing it on the ground after i back wash.
Reply
Possible reasons for sand coming out on the ground after backwashing would be.... Valve problems, the wrong sand, an oversized pump or your sand filled too high in your tank. Your sand should be filled about 3/4 of the way up the tank to account for trapped debris.
Reply
ARE THERE MANUALS AVAILABLE FOR MODEL T-200BP-1 CODE1-HO3K?
Reply
Hi Kenneth, Here is the Owner's Manual for the T-200BP-1 Filter.
Reply
where can I buy a new sand filter model T-200BP-1
Reply
Hi Diane, I am unaware of anyone who still carries this filter as it has been discontinued by the manufacture for some time now. We would suggest the Jacuzzi Laser 22-1/2" Sand Filter as a replacement.
Reply
Hello, I have a Sta-Rite T200BP-1 filter. The operating label came off and I would like a replacement -- It is a 5 port. Do you have any for this model?
Thank you
hollie
Reply
Hi H, Unfortunately, the decal or label for the original T200BP-1 filter is not available. If you have the original filter valve you will need to replace the Plug & Cover Assy-77704-0104.
Reply