water after 2 weeks still cloudy, we put new sand 2years ago,i see sand on the ground when i backwash not a lot
Reply
Tom, Most of the time when you get sand back into the pool it is because of a Cracked Lateral or a Bad Spider Gasket. We have a good article on this topic here: Article on Getting Sand Back in Your Pool.
Reply
I am not seeing sand in the pool, i am seeing it on the ground after i back wash.
Reply
Possible reasons for sand coming out on the ground after backwashing would be.... Valve problems, the wrong sand, an oversized pump or your sand filled too high in your tank. Your sand should be filled about 3/4 of the way up the tank to account for trapped debris.
Reply
ARE THERE MANUALS AVAILABLE FOR MODEL T-200BP-1 CODE1-HO3K?
Reply
Hi Kenneth, Here is the Owner's Manual for the T-200BP-1 Filter.
Reply
where can I buy a new sand filter model T-200BP-1
Reply
Hi Diane, I am unaware of anyone who still carries this filter as it has been discontinued by the manufacture for some time now. We would suggest the Jacuzzi Laser 22-1/2" Sand Filter as a replacement.
Reply
Hello, I have a Sta-Rite T200BP-1 filter. The operating label came off and I would like a replacement -- It is a 5 port. Do you have any for this model?
Thank you
hollie
Reply
Hi H, Unfortunately, the decal or label for the original T200BP-1 filter is not available. If you have the original filter valve you will need to replace the Plug & Cover Assy-77704-0104.
Reply
the hand valve on top that you push to rotate is leaking. Is there a gasket , I removed the top to see and saw none or do I replace top head.?
Reply
Hi, Jerome. You can either replace the entire valve or get the parts to repair it. Check out the Sta-Rite Multiport 1-1/2" WC112 Series Parts Diagram.
Reply
Is water suposed to come out the back when the filter is in filter setting ? Should there be a cap on the line of some sort?
Reply
Usually, this is a sign that the spider gasket has failed within the multiport valve. You just need to identify the model valve and advise so we can cross-reference the correct gasket for you. If you are not sure then you can email us images of that valve and filter to upload@inyopools.com so we can further assist.
Reply
I have this filter on my pond. It is at least 25 years old. Should I replace it? If so what would be best?
Reply
Hi, Dianne. This unit is no longer being manufactured, however, some parts are. If you are able to replace it, then I recommend you do because eventually, it will need to be. The Waterway Carefree 19" Sand Filter - FS01922 is a great option.
Reply
We have lost the drain plug for the sand filter do you have a parts number to replace it
Reply
Hi Karen, You will require this Sta-Rite Cristal-Flo Drain Plug Assembly which we do have in stock ready to ship.
Reply
Have a Cristal-flo sand filter model # T-200BP-1 need a drain plug or cover what would the parts number be. Bought one today but the threads are not right. Help Thanks Karen
Reply
Hi Karen, You will require this Sta-Rite Cristal-Flo Drain Plug Assembly which we do have in stock ready to ship. If you just need the cap/cover then you can go with this Sta-Rite Cristal-Flo Drain Cap
Reply
How much sand goes in a t-200bp-1 filter
Reply
Hello Eddie. The Sta-Rite Cristal-Flo Sand Filter model T-200BP-1 requires 200 pounds of sand. Attached please find the Cristal-Flo Sand Filters Data Sheet for reference.
Reply
