Part # 5110-53
Alternate Part #'s SPX2610CKIT, 35-150-2053, HAY-101-1501, HAYSPX2610CKIT
Generic Super Pump™ Style Drive Train UpGrade Kit 1.5 HP
For pumps with an "SP1600X-" part number (manufactured before 1983), the use of these Drive Train Upgrade Kit will upgrade the old pump to the current "SP2600X-" series. This will improve GPM, reduce noise and provide slightly better energy efficiencies.
KIT INCLUDES:
(1) IMPELLER SP2610-C INYO# 5110-10DA
(1) DIFFUSER SP2600-B INYO# 5110-09A
(1) GASKET, DIFFUSER SPX1600R INYO# 5110-08
(1) GASKET, HOUSING SPX1600T INYO# 5110-12
(1) SEAL PLATE SP2600-E INYO# 5110-13C
(1) MOTOR MOUNTING PLATE
(1) SHAFT SEAL
I have a Hayward SP3010X15AZ with a UST1152 and GOKIT. Is this the correct kit to upgrade? - Generic Super Pump™ Style Drive Train UpGrade Kit 1.5 HP - 5110-53
Reply
Hello Troy. The pump model SP301015AZ cross-references to a Hayward Super II Pump. The compatible Drive Train Upgrade Kit 1.5 HP is the Generic Super II Pump™ Style Drive Train UpGrade Kit 1.5 THP - PL2762 The parts contained in the PL2762 would include those in the GOKIT2. (Super II Pump) Attached please find the Hayward Super II SP3000 Series exploded parts diagram for reference.
Reply
I have a Super Pump 1600; I'm wanting to replace my Century B130 motor with a VGreen 2.7 HP variable speed motor and rebuild my pump; would this be the correct kit?
Reply
Hello Mike. The transition from the 2.4THP B130 motor to the V Green 2.7THP variable speed motor does not necessitate a drive train change. The recommended parts change would be the motor shaft seal, seal plate gasket, and diffuser o-ring. The tune-up kit, GOKIT3 contains those parts. Tune Up Kit Hayward Super Pump - GOKIT3 If a drive train replacement was warranted, the 2.0 HP SPX2615CKIT would be more appropriate. Super Pump SP1600X- Series Drive Train UpGrade Kit 2 HP - SPX2615CKIT Technically the 1.5HP Upgrade kit could be utilized but those parts would not maximize the performance of the 2.7THP V Green Motor.
Reply
Will this upgrade work on the pump pictured below?
Reply
Hello Sean. The Generic Super Pump Drive Train UpGrade Kit 1.5 HP is specific to the Hayward Super Pump. Attached please find a link to the Hayward Super Pump. Please visually compare this reference to your existing pump to confirm identity. Hayward Super Pump 1 1/2 HP Single Speed - W3SP2610X15
Reply
Will this upgrade work on this pump?
Reply
Hello Sean. The Generic Super Pump Drive Train UpGrade Kit 1.5HP is specific to the Hayward Super Pump. Attached please find a link to the Hayward Super Pump. Please visually compare this reference to your existing pump to confirm identity. Hayward Super Pump 1 1/2 HP Single Speed - W3SP2610X15
Reply
will this work on a 1 hp pump
Reply
Hello William. Technically, the Drive Train UpGrade Kit 1.5 HP part 5110-53 will work on a 1.0 HP motor/pump but it is not recommended. The 1.5 HP Impeller contained in this kit will place too much stress on the 1.0 HP motor and potentially shorten its lifespan. If the existing motor has a Service Factor (SF) rating of 1.5 or greater, then the kit 5110-53 is the correct upgrade. Otherwise, the Generic Super Pump Style Drive Train UpGrade Kit 1.0 HP part 5110-52 is the correct choice. Generic Super Pump™ Style Drive Train UpGrade Kit 1 HP - 5110-52
Reply
the part # of drive train I need to replace is Hayward SP-1600-F
Have a 1.5 hp Century UST-1152 that I am also replacing
need to purchase boyh
Reply
Yes, the 5110-53 is the correct drive train for your Hayward Super Pump 1.5HP pump.
Reply
if pump is squealung load will this fix it
Reply
Hello Chanelle, If the pool pump is making a loud noise (squealing) during operation it is typically a sign that the motor bearings are wearing. This kit is not the solution to this issue. The motor bearings or the motor itself will require replacement. Additional information would be beneficial to identify replacement bearings or a replacement motor. Please provide any manufacturer/model number of the motor (as indicated on the motor label) and information on the manufacturer/model of the pool pump so that correct replacement parts can be identified.
Reply
Are the seals provided with this kit the salt-seal-upgrade type?
Reply
KIT INCLUDES:(1) IMPELLER SP2610-C INYO# 5110-10DA(1) DIFFUSER SP2600-B INYO# 5110-09A(1) GASKET, DIFFUSER SPX1600R INYO# 5110-08(1) GASKET, HOUSING SPX1600T INYO# 5110-12(1) SEAL PLATE SP2600-E INYO# 5110-13C(1) MOTOR MOUNTING PLATE(1) SHAFT SEAL
Reply
will this kit work for century 1,5hp single speed motor
Reply
Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Does this com assembled or do you have to put it together. Will it fit on a sp2610x15
Reply
You'll have to put it together. In order to install this on the motor, it would have to be installed piece by piece. This kit will fit the Hayward SP2610X15.
Reply
Hello, Will this work on a Century 1.5HP C48L2N134B1? Thank-you
Reply
Hi, Tim. Yes, it will if you have a Hayward Super Pump SP1600 or SP2600 Series.
Reply
Excellent, thank you!
Reply
The Most Recent Reviews
(5 out of 5 stars) great upgrade to old pump
Reviewed By: Doran D. from Dallas TX ()
Pros: compatible with older 1600 series pump
Cons: none
This is a great upgrade for the older style super-pump and easy to install.
Was this review helpful to you?
(5 out of 5 stars) Pump upgrede
Reviewed By: Jerry O. from East Helena, MT ()
The whole upgrade kid was easy to install with the exception of the difuser; but the modifcation to it was easy. I think anyone could do the upgrade!
Was this review helpful to you?