Model # 77181100
Alternate Part #'s 77181100-, S77181100, 56-102-1128, AMP-30-622, PEN77181100
Providing big lighting performance for smaller pools and spas
The AquaLight ® uses halogen quartz bulbs and designed for installation in small plastic or stainless steel Pentair niches. The light shell is high-quality stainless steel and the lens is Prismatic tempered glass.
Features:
I have Pool Lights from American Products that are leaking and need to be replaced. They are about 20 years old and I believe the model is 792066 and the housing is7824xx but am not 100% sure because they are faded. The housing is about 5.5" in diameter and 8" from front to back. Which of your light will fit and replace these lights.
Reply
Hi, Jeff. The Pentair AquaLight or SpaBrite fixtures can be used as a replacement for the American Products unit you have.
Reply
i have american product inground pool light rough dimension 6" from end of front flange across the front, it is 33/4" or 4" deep. the back of unit is about 41/4" wide model series#7878xx watts-75 volts 12 -bulb mr16 model 792066 . whar can i use for a replacement , it came with a 15foot cord.
Reply
I have Pentair light that is not working. But the cable is already in place. Is there a way I can replace it with new light without replacing the cable? Can I replace it with any other LED light using the same able? Can you suggest? Thanks
Reply
Hello, So you cannot use the same cord when replacing an entire light, and if you can provide us with the model number of your light then we can confirm whether you can use an LED bulb with it. There should be a label on the backside of the light fixture. If not then you may need to open the light fixture, take a picture of the inside of it and either send that to us or provide that using our online chat feature so we can confirm for you.
Reply
