1. Home
  2. Pool Parts
  3. Plumbing Valve Parts
  4. Hayward Ball Valves
  5. 6651C

$42.99

Qty:
 ADD TO CART

By Hayward Pool Products

Details

Top

Part # 6651C

Manufacturer Code SP0729

Dimensions 6.5" L x 3.5" W x 2" D

Alternate Part #'s SP728A, SP729, SPX0729, SPX729, 26-150-1004, HAYSP0729, HPPSP0729

Product Description

HAYWARD BALL VALVE, HAYWARD #SP0729 1-1/2" MPT X VAC HOSE ADAPTOR (TAPERED ADAPTOR, . 1-1/4" OR 1-1/2" VAC HOSE WILL SLIP ON THIS END)

**********

BODY IS MARKED "SP-728-A" HANDLE IS MARKED "SP-728-D" HANDLE IS AVAILABLE AS A PART, NO OTHER PARTS ARE SOLD FOR THIS, ORDER THE COMPLETE VALVE

Top
Ask A Question
?     Asked on 5/1/2013 by Guest

Can I use this valve on the outlet port for the Hayward X-Stream filter?
 Reply

A  Answered on 5/1/2013 by InyoPools Product Specialist Patrick P.

Yes, this would be the valve used on the outlet port for the Hayward X-Stream filter.
 Reply


?     Asked on 4/2/2019 by Inyo Visitor

I have a c3030 swim clear filter. Will this replace the current drain plug? And what size is drain spout? I wish to attach a drain hose to divert water from the filter location when necessary
 Reply

A  Answered on 4/2/2019 by InyoPools Product Specialist Hector F.

The drain plug is part number 4663-44 which has a 2-inch diameter. 
 Reply


?     Asked on 7/19/2019 by Inyo Visitor

The ballvalve of my skimmer is broken .it has nummer SP 728. Hayward.is it still available or hs number SP 729 the same size to connect to the skimmer
 Reply

A  Answered on 7/19/2019 by InyoPools Product Specialist Lennox H.

Hi. This Econoline 2-Way Ball Valve - SP0729 is the correct replacement. 
 Reply


?     Asked on 10/5/2020 by Mark Adams

I have a Hayward DE-LE-42056 filter and I need to divert drain water away from my filter. Will this valve fit my drain plug?

 Reply

A  Answered on 11/2/2020 by InyoPools Product Specialist Hector F.

Hi Mark, this Hayward D.E. filter series is not compatible with this valve at the drain port however they do have a multiport valve which has a "waste" setting that you can attach a male threaded fitting that can have a backwash hose clamped to it for draining. 
 Reply


?     Asked on 10/7/2021 by Jay Bacher

i need to make sure this part will fit my pool pump. It is currently being used to drain the water lever with a long blue hose attached to it. My pool pump is model C150S

 Reply

A  Answered on 10/7/2021 by InyoPools Product Specialist Rich N.

Hi Jay, the Econoline 2-Way Ball Valve, 1-1/2"MPT x Hose Adapter - SP0729 will replace the drain plug on your Hayward C150S SwimClear Cartridge Filter perfectly.  Here is a link to 50' of 1-1/2" backwash hose in case you need it as well.
 Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Needed shut off valves for a new pump/filter assembly
Written on 8/13/2017 by Guest

I assembled a new pump/filter assembly and put a valve on the pump inlet and I put the other valve on the filter tank outlet. It was very easy to do.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
(67%) 2 of 3 customer would recommend this product to a friend.
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review

The Most Recent Reviews

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

Arrived quickly and works properly.


Was this review helpful to you? 
 

 (5 out of 5 stars)  Perfect Part for the job

Reviewed By:  Kevin B. from Bolingbrook, IL ()

Pros: exactly what i needed

Inyopools had the part I needed for my pool filter. Piece delivered when they said it would and it fit and works perfectly.


Was this review helpful to you?