Part # 5270-32
Manufacturer Code 6204
Dimensions 2" L x 2" W x 1" D
Alternate Part #'s 100025-002, 204LL, 6204, ALA605001, NA6204LL, APC6204
Motor Ball Bearing
Do you have replacement bearings for Century SQS1102R motor?
Reply
Hello Anthony. The replacement bearings for the Century Motor model SQS1102R are quantity 2, (Drive End Bearing and Opposite Drive End Bearing) Bearing 203 (Single). Bearing, 203 (Single) - 62032RS
Reply
I have a pump with a century SQ1152 motor that the bearings are at end of life. What bearings am I looking for.
Reply
Hi, Your motor will take one of these 6203 Pool Motor Bearings and one of these 6204 Pool Motor Bearings We have put together a couple of videos on How to Replace Pool Motor bearings which you may find helpful when you tackle this project. Video on How to Replace Motor Bearings - Part 1 and Video on How to Replace Motor Bearings - Part 2
Reply
What bearings do I use for the front od Cetury USQ1202?
Reply
Hi, Your motor will take one of these 6203 Pool Motor Bearings and one of these 6204 Pool Motor Bearings We have put together a couple of videos on How to Replace Pool Motor bearings which you may find helpful when you tackle this project. Video on How to Replace Motor Bearings - Part 1 and Video on How to Replace Motor Bearings - Part 2
Reply
What bearings do I need for Century motor USQ1202.
Have existing SKF bearings 6204-2RSH/GJN & BB1-0623-BB
Reply
I have a Hayward model C48k2n143b1 pool pump motor. What bearings do I need?
Reply
Hello, what bearings do I need for a 3 HP AOS 168455, frame 56Y, motor (in a Pentair Challenger pump) and also for a 2 HP AOS 184214, frame 56Y, motor (also in a Pentair Challenger pump)?
Reply
Hi, Mike. The 168455 motor uses the 304 Bearing on the shaft end and the 203 Bearing on the opposite shaft end. The 184214 motor also uses the 304 Bearing on the shaft end and the 203 Bearing on the opposite shaft end.
Reply
I have a AOSUQC1102, What bearings do i need?
Reply
Hi, Edward. The UQC1102 motor uses the 203 Bearing on both ends of the motor.
Reply
I Have a Pump for above ground pool,
WaterWay
SD-15-N11AC5, HP 1.5
I would like to know the size of the Bearing for
electric Motor
Reply
Hi Pierre, Unfortunately, we do not have the bearing size for the motor for your pump, you will have to contact Waterway or Century.
Reply
Does this replace a 6204V bearing
Reply
Hi Dan, I can't confirm because we don't have any info on the 6204V bearing. If you can provide the motor's Part, Cat or Mod number I try to find out if the 6204-II bearing will work.
Reply
I need replacement bearings for an A.O. Smith motor 1.5hp hayward super pump model # C48L2N134B1 are these the bearings I need?
Reply
Hi Michael, The C48L2N134B1 motor take (2) 203 Bearing (62032RS), one on either end.
Reply
need the front top bearing for century hst225....is this the correct one?
Reply
Hi Leigh, Unfortunately, we do not have the bearing size for the HST225 motor so we can not confirm if this bearing will fit.
Reply
Hi, I need to replace both bearings for century pool pump 1.5 hp. Whatare bearing part numbers?
Reply
Hi Andrew, If you have not taken apart the motor you can provide us with the CAT, MOD, or PART # of the motor we can find out what size bearings is needed. If you have the motor apart, the part number of the bearing would be on either side of the bearing.
Reply
I have a Century pump UST1202. Which are the two bearings part number to replace? Thanks.
Reply
Hi Jose, The UST1202 motor would uses (1) 203 Bearing (62032RS) on the rear end and (1) 204 Bearing (6204-2RS) on the shaft end.
Reply
I have a U.S. Motors Cat. No. EB228 Model K63CXERN-4780 frame 56J. What bearings do I need?
Reply
Jordan. You will need 2 of the 203 Bearing (62032RS).
Reply
What bearings do I purchase for the following motor:
AO Smith K48K2PA105C1
3/4 hp
Thanks,
Ben
Reply
You would require 2 of the 6203 Motor Bearings (also called 203 Bearings).
Reply
Hello, I have AOS-B2854 1.5hp SF 1.1 frame 56Y centurion motor. Which bearings do I need to purchase to fit this motor? Thank you
Reply
You would require two of the 6203 (203) Motor Bearings.
Reply
Hello,
Which ball bearings do I need for Century motor part number B855, 2 HP, 230V? For both the front and back?
Thnak you
Reply
Hi Jimmy the B855 requires one 6203 Bearing and one 6304 Bearing.
Reply
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Bearing puller
I wanted to have a set of bearings and a seal on hand for replacement during my next regular service of the hot tub.
Being over 25 years old, I had some difficulty verifying the necessary parts, and got excellent guidance online from INYO pools. Ordered parts which arrived in days and the following weekend, drained the tub for cleaning and a water change.
I wrestled the pump out and disassembled and cleaned the motor. Replaced the bearings and put in a fresh seal as always.
Very pleased to have the correct parts on hand for the job, and it went as smoothly as one could hope.
Thank you INYO pools, I will be back next time I need anything and will suggest you to anyone who needs pool and spa parts and supplies.
The Most Recent Reviews
(5 out of 5 stars) good bearing
Reviewed By: Inyo Customer ()
fit well and quiet
Was this review helpful to you?
(4 out of 5 stars) Keeping her going
Reviewed By: Inyo Customer ()
Thanks to INYO pools for the assistance, right parts for the job
Was this review helpful to you?