Raypak Pool Heater Inlet & Outlet Header - Plastic (006827f)

$524.26

IN STOCK
FREE SHIPPING

Part # 6234-170

By Raypak

  4 Average  

Details

Top

Part # 6234-170

Manufacturer Code 006827F

Alternate Part #'s 006827F, 47-197-1710

Product Description

Raypak Pool Heater Header Replacement

This is a replacement header for the Raypak pool heater. Includes all items shown in product images. If you need the replacement header unions then also order the 6234-96 Header Unions Set of 2 with O-rings.

Commonly Used on the Following Raypak Heaters:

  • Raypak R185
  • Raypak R206
  • Raypak R265
  • Raypak R266
  • Raypak R305
  • Raypak R366
  • Raypak R405
  • Raypak R406
Top

?     Asked on 4/27/2021by Inyo Visitor

Will part number 006827F work on Raypak model number P-R406A
 Reply

A  Answered on 4/28/2021 by InyoPools Product Specialist Matt S.

Yes, this header is compatible with the Raypak Atmospheric Digital RP2100 Heaters 206A, 266A, 336A, 406A (11/01/04-Current)
 Reply


?     Asked on 10/6/2020by Bill

Is the Pro Tek Shield right or left handed thread?
 Reply

A  Answered on 2/4/2021 by InyoPools Product Specialist Michelle B.

Hello,Thank you for contacting Inyopool products!This is a right handed part. Unfortunately, we do not sell the Pro tek shield units on out website. 
 Reply


?     Asked on 9/21/2020by Shane

Does this include the unitherm governor?
 Reply

A  Answered on 12/16/2020 by InyoPools Product Specialist Hector F.

Hi Shane, this header does not include the unitherm governor. If you can provide us with the specific model number of the unit, approximate year of installation, or serial number then we can confirm the governor part number for you. 
 Reply


?     Asked on 6/15/2020by Mike

I have a rheem pool heater and it is leaking at the inlet/outlet what part do I need

 Reply

A  Answered on 6/15/2020 by InyoPools Product Specialist Lennox H.

Hi, Mike. If the unit is leaking at the unions, you may need to replace the Union Assembly - 006723F or the Union O-rings - 229.
 Reply

  • Commented on 6/15/2020 by Product Owner

    It is leaking at the top of the Union should I just replace the whole thing to be on the safe side is the Union the inlet and outlet where the pipes connect
     Reply

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      Michael, You can replace the Inlet/Outlet Header, Plastic - 006706F along with the Union Assembly - 006723F 
       Reply


?     Asked on 4/4/2020by Scott Wilson

Forgot to ask if this header kit comes with instructions? Just curious as to where that brass tube thing goes and the spring?
 Reply

A  Answered on 11/12/2020 by InyoPools Product Specialist Megan C.

I am not certain if it will include directions, however, RayPak has a YouTube Channel that you mind helpful information on you may view it here https://www.youtube.com/results?search_query=raypak+header The part in the image is the well sensor, it is used to hold the temp sensor.  
 Reply


?     Asked on 4/4/2020by Scott Wilson

Will this fit my heater model number PR406A-EP-C? And I see there is a new upgrade to one that has a protek shield are they available for my model or is my heater too old for that to be incorporate into my system? Also which pressure sensor will I need for my system as I see there are two styles out there? Mine is really corroded and might as well replace it.
 Reply

A  Answered on 11/12/2020 by InyoPools Product Specialist Megan C.

The Raypak Pool Heater Inlet & Outlet Header - Plastic (006827f) is for years 11/01/04-Current. The Water Pressure Switch (Plastic Header) - 006737F is used with this header. We do not offer any models for Protek Shield. 
 Reply


?     Asked on 2/18/2020by jimmy thompson

Hi does this fit the 407a modek
 Reply

A  Answered on 2/19/2020 by InyoPools Product Specialist Lennox H.

Hi, Jimmy. Yes, this will work fit the 407A model with polymer header. 
 Reply


?     Asked on 6/6/2016by edward

Does this part fit Raypak PR266a-EN c?
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Patrick P.

Yes this is the plastic inlet and outlet header for the Raypak PR266a-ENC heater manufactured from 11-01-2004 to current.
 Reply


Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews