Hayward 1.5 HP Up Rate Dual Speed NorthStar Replacement Motor - SPX1610Z2MNS

Part # 5112-062

By Hayward Pool Products


Details

Top

Part # 5112-062

Warranty 1 Year

Manufacturer Code SPX1610Z2MNS

Dimensions 13" L x 7" W x 7" D

Alternate Part #'s SPX1610Z2MNS, 35-150-3100, HAY-101-2101, HAYSPX1610Z2MNS

Product Description

Hayward 1.5 HP Up Rate Dual Speed NorthStar Replacement Motor - SPX1610Z2MNS

**NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 17590450.**

Product Specifications

Notes:
California Title 20 Compliant
Volts:
230V
Amps:
9.1/3.4 amp
Frame:
56J
HP:
1.5/ .25 HP
Service Factor:
1.3
Speed:
Dual
Volts:
230 V
RPM:
3450/1725 RPM
Top

?     Asked on 6/25/2021by Kate Hilton-Hayward

Hi there! I have a Hayward Northstar self-priming dual speed power saver pump and I believe the motor is about to bite the dust. I am looking to replace it and came across this model. The specs are just a little different from mine so I wanted to make sure this model is compatible. Pictures are attached. Thanks! Kate

 Reply

A  Answered on 6/25/2021 by InyoPools Product Specialist Craig C.

Hello Kate.  The Hayward 1.5 HP Up Dual Speed NorthStar Replacement Motor model SPX1610Z2MNS is a compatible replacement for the NorthStar motor model SP1610Z2MNSR.  It is recommended that the motor shaft seal, seal plate gasket, and diffuser o-ring be replaced at the same time.  Attached please find an exploded parts diagram for the Hayward NorthStar SP4000 Series Pump manufactured 2008-current.  Please note Key items 8,9, and 13 (SPX4000SA2).  Hayward NorthStar SP4000 Series Pump (2008-Current)   In the event your NorthStar was manufactured 1998-2007 that parts diagram is attached as well.   Hayward NorthStar SP4000 Series Pump (1998-2007)  There is a visual difference in the pump housing (Key 1) between the 2 models.
 Reply


?     Asked on 5/18/2020by Eric Schoenig

Hello! My SPX1610Z2MNS 1.5HP 2 speed motor just died on my Hayward Northstar SP1410X152NS pump. Would this be the correct replacement? Also I have a salt water pool, what other kits would I need to replace the motor, i.e: gasket, impeller, etc.? Thank you!

 Reply

A  Answered on 5/18/2020 by InyoPools Product Specialist Patrick P.

Hi Eric, The motor on this page is the correct motor for your SP4010X152NS pump and we would also suggest this 1.5 HP Northstar Seal and Impeller Kit. We also put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply

  • Commented on 5/18/2020 by Product Owner

    Excellent! Thank you so much! You guys are the best!
     Reply

    • Commented on 5/18/2020 by InyoPools Product Specialist Patrick P.

      Thanks Eric!
       Reply


?     Asked on 3/25/2020by Seran Antaramian

What are the full specs of this pump? SF, Amps, RPM's, etc. Perhaps just post a picture of the label.
 Reply

A  Answered on 3/26/2020 by InyoPools Product Specialist Patrick P.

Hi Seran, Here are the specifications of this motor. High Speed HP = 1.5 HP, Low Speed HP = .25, Service Factor = 1.3, Volts = 230, RPM = 3450/1725, Amps @ High HP = 9.1, Amps @ Low HP = 3.4, Frame = 56J. We have also attached a photo below.

 Reply

  • Commented on 3/26/2020 by Product Owner

    Wow! That was fast. Thank you so much. You guys are the best!
     Reply

    • Commented on 3/26/2020 by InyoPools Product Specialist Patrick P.

      Seran Thanks so much for the kinds words and for your order! According to UPS it looks like you have the order delivered by Saturday.
       Reply


?     Asked on 6/10/2019by scott shelton

Will my old motor have a high/low switch i can use on this?
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Patrick P.

Hi Scott, You could try using your old toggle switch or if you need a new then you will need this Northstar Dual Speed Motor Toggle Switch
 Reply


?     Asked on 5/25/2018by Eric S.

Hello! I'm currently in need of a new capacitor for this motor. Could you please recommend one for this model? Thank you!
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Eric S. The replacement capacitor for this motor is Part # 628318-308.
 Reply


?     Asked on 7/26/2017by Marcel

Does the 2 speed switch 79129900 fit on this motor?
 Reply

A  Answered on 7/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Marcel. The Dual Speed Toggle Switch - 79129900 is compatible with this SP1610Z2MNS motor.
 Reply


?     Asked on 1/18/2012by Guest

Can you direct me to the proper hi low switch for this motor?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
 Reply


?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply