Part # 5056-15

Manufacturer Code 435

Dimensions 6.25" X 0.25"

Alternate Part #'s 351021376, 39204100, O-2060, O-218, O218, P-13-6P, P136P, STA1013746, U9229, 90-423-5436, AEQO218, APCO2071, SPG-601-1122

Product Description

INYO # 5056-15 Inside Diameter: 5-3/4" Outside Diameter: 6-1/4" Cord Thickness: 1/4"

Frequently Bought with Pump Cover O-ring

Pump Cover 25304-000-020

Pump Basket 5400-B106

Magic Lube O-ring Lubricant 630


?     Asked on 6/16/2017by Jack76015

New motor from Inyo. Works perfect. New pump lid and o-ring. New impeller gasket. New face plate gasket. New shaft seal. New pressure gauge for top of filter. New filter grids. PVC has been leak tested with dye ... no leaks . The problem: Pump pressure only 3-5 PSI when it should be 10. Not losing water out of pool. Massive bubbles under clear pump lid. Ready to pour concrete in pool and make tennis court! REALLY need some help. Thinking maybe clogged inlet to pump plumbing?

A  Answered on 7/23/2017 by InyoPools Product Specialist Alex V.

Jack, With all that work that was done, air got into the system. Please be patient. The air will work itself out. if you have an air release valve on the filter tank, you can manually release some of the air periodically to speed the process. 

?     Asked on 4/14/2018by Donna Hester

Will this fit a Sta-Rite P4RA6F 187L ? I also need the small oring for the bottom of pump

A  Answered on 4/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Donna. It will not, you will need the Trap Cover O-ring - U9-375.

?     Asked on 7/2/2018by Deborah Williams

Will this fit a Sta-rite Dura-Glas II

A  Answered on 7/2/2018 by InyoPools Product Specialist Andy O.

Hello Deborah- The correct o-ring for your Sta-Rite Dura-Glas II and Max-E-Glas II is the O-ring, Trap Cover (5105-13) - U9-375 Part #5055-18

?     Asked on 7/19/2018by Alan

Looking for 0 ring for a Sta-rite P2Ra53- then hard to read 124L? looks like about 6.75" lid, 6.5" centerline

A  Answered on 7/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Alan. This Trap Cover O-ring will for your series pump model. 

?     Asked on 8/21/2019by Dianne Trivers


A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

The 5056-15 is the correct strainer lid o ring for the P2RA5E-181L.


Est. Repair Time

Less than 1 hr

Tools Needed


Needed o-ring for new top

Written on 8/18/2022 by Guest

Bought o-ring along with top

Were these instructions helpful? 


Review Summary

 (Average 4.75  out of 5 stars)
8 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews