DVK-7C Valve, Clamp Type - 39263020K (Without Valve Body O-Ring)

$139.04

IN STOCK
FREE SHIPPING

Part # 39263020K

By Jacuzzi Inc.

  5 Average  

Details

Top

Part # 39263020K

Alternate Part #'s 39-2630-20-K, 39-2630-20-R, 39263020K, 39263105, DVK-7C, DVK7C, 26-105-1006

Product Description

DVK-7C Valve, Clamp Type - 39263020K (Without Valve Body O-Ring) The valve body o-ring is no longer included, you will require ordering separately. 

O-ring, 6-3/4" ID, 3/16" (O-263) - 364 PART # 4822-04 https://www.inyopools.com/Products/07501352023079.htm?Keywords=4822-04 

Top

?     Asked on 11/24/2021by Seth C Schneider

Looking for a rebuild kit for a Jandy L250c-7c filter valve. The value will not switch from backwash regardless of handle position - suggestions? Appreciate the help! Seth

 Reply

A  Answered on 12/10/2021 by InyoPools Product Specialist Rich N.

Hi Seth, this Diverter Repair Kit DV 6/7 - 39251509K is a good start to rebuild your Jacuzzi 7 Way Dial valve unless you need the handle and cover as well.  This DVK7 Complete Cover Kit - 39262605K would get you going again if that is the case.
 Reply


?     Asked on 10/20/2021by Doug Moore

Is this just replacing the top handler for model # 39263105??
 Reply

A  Answered on 10/21/2021 by InyoPools Product Specialist Megan C.

The DVK-7C Valve, Clamp Type - 39263020K(Without Valve Body O-Ring) is the top valve to replace the older model#39263105. The DVK7 Complete Cover Kit - 39262605K is the top key cover for the valve itself. Click here to view the parts page for the Jacuzzi 7 Way Dial https://www.inyopools.com/pool_parts_7_way_dial.aspx 
 Reply


?     Asked on 5/22/2021by Gary L Marshall

I have a Jandy SFTM25 sand filter that i need to replace the multiport valve assembly on part number SFTM-MPV it also has a part number of 39263105 on a label on the side of the valve. This number 39263105 is listed on this part as well. If this is a direct replacement for mine will all of the plumbing be in the the same locations so i don't have to change anything. And does this also come with the clamp assembly as well, please advise. Also is this in stock and how long to ship, thank you.
 Reply

A  Answered on 5/23/2021 by InyoPools Product Specialist Patrick P.

Hi Gary, Yes this valve is in stock and is a sutiable replacement for your current valve. We cannot guarantee the port locations will be in the exact same spot as they have made a few modifications to these valves over the years. If you want to make sure you dont have to re-plumbing then you may consider going with this Jacuzzi Top Half Assembly which is the top half of the valve and all the guts. The clamp is not included and here is a link the Jandy SFTM25 Replacement Clamp
 Reply


?     Asked on 5/8/2021by Darren

I have a 39263105 and I wanted to know is there a specific sand it needs and how much does it take and how often should it be changed. thanks

 Reply

A  Answered on 5/10/2021 by InyoPools Product Specialist Patrick P.

Normally you will need to replace your sand every 5-7 years and you will use #20 Silica Sand also called pool sand. Here is a Video on How to Replace your Pool Filter Sand which you may find helpful.
 Reply


?     Asked on 5/7/2021by Beverly Krietemeyer

Is this the valve I need to replace mine? I just bought a new diverter kit and the valve was broken in the process. Does the new valve come with o-rings and all?

 Reply

A  Answered on 5/7/2021 by InyoPools Product Specialist Robert M.

Yes, this is the correct replacement valve for your Jacuzzi filter and it includes the o-rings.
 Reply


?     Asked on 1/14/2021by Carlos Arraez

Sorry, I'm looking for valve #39263105, is it the same one? Is it the same as or the same as the Carvin valve? I appreciate your help with this question. Thank you

 Reply

A  Answered on 1/18/2021 by InyoPools Product Specialist Hector F.

Hi Carlos, yes this is the correct replacement multiport valve for the Carvin valve model 39263105. 
 Reply


?     Asked on 7/7/2020by David Kaysinger

Will this work on a Jacuzzi 191L filter? Or replace a Cantar DV Assy 7-pos 1-1/2 V-FL 39263030 valve?

 Reply

A  Answered on 12/14/2020 by InyoPools Product Specialist Hector F.

Hi David, this is the correct replacement multiport valve for the Jacuzzi model 39263030 valve.  
 Reply


?     Asked on 7/7/2020by Kathy Young

I have a Jacuzzi sand filter and trying find out if this would be the correct top Mount Valve the number 39263105

 Reply

A  Answered on 11/19/2020 by InyoPools Product Specialist Hector F.

Hi Kathy, yes this will be the correct multiport valve replacement for your Jacuzzi multiport valve model 39263105. 
 Reply


?     Asked on 6/11/2020by Inyo Visitor

I have a Jacuzzi Brand Filter - 6 Position Dial - Laser II-192-6-CP FIL Will this work as a replacement?
 Reply

A  Answered on 6/12/2020 by InyoPools Product Specialist Patrick P.

Yes this would be the correct replacement valve for your Jacuzzi Laser II filter.
 Reply


?     Asked on 6/5/2020by Marcus Cira

I have a Jacuzzi SS160-HK6-FP filter and need to replace te clamp on valve. Is this the correct assembly for that filter.
 Reply

A  Answered on 12/2/2020 by InyoPools Product Specialist Hector F.

Hi Marcus, the original clamp assembly for the Jacuzzi sand filter model SS160 is part number 4626-54
 Reply


?     Asked on 5/23/2020by Inyo Visitor

I have a jacuzzi ss240-6 sand filter. Will this fit my filter?

 Reply

A  Answered on 5/23/2020 by InyoPools Product Specialist Patrick P.

We show that this filter will use this TM-12-H8 Valve
 Reply


?     Asked on 4/14/2020by Todd Gilbert

I have an old Jacuzzi #3926303, would this valve replace it?
 Reply

A  Answered on 4/14/2020 by InyoPools Product Specialist Lennox H.

Hi, Todd. This is the correct replacement valve.
 Reply


?     Asked on 8/8/2019by Jane

I have an old sand filter need a new top Mount valve. Filter mode : JACUZZI L192C-7C. What will be the right part number.

 Reply

A  Answered on 8/8/2019 by InyoPools Product Specialist Matt S.

The DVK-7C Valve, Clamp Type - 39263020K is the correct replacement valve for your Jacuzzi Laser Clamp Style
 Reply


?     Asked on 7/14/2019by corina

I have allantic pools by jacuzzi sand filter that leeks I need valve parts could you help me find them
 Reply

A  Answered on 7/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Corina. Please provide the tank or valve model number or pictures so that we can identify the valve.
 Reply


?     Asked on 6/10/2019by Julie Zwirtz

Could you help me identify this model? I'm needing to replace it, and I think this is the correct replacement but am not sure.

 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Patrick P.

Hi Julie, Thank you for the photos! The valve on this page is the correct replacement valve for your Jacuzzi 39263105 valve shown in your photos.
 Reply


?     Asked on 5/28/2019by Tony Mossa

I have a Jucuzzi #39263105 DV Assy 7-Pos 1 1/2. I am looking for the bottom plastic basket that screws onto the unit with the 3 screws? Can you help?
 Reply

A  Answered on 10/3/2019 by Industry Professional

it is not available as a seperate item.
 Reply


?     Asked on 5/25/2019by Paul

need to replace a multi valve system DV assy 7-pos 1-1/2 V-FL model # 39263030 - will this unit work?
 Reply

A  Answered on 5/25/2019 by InyoPools Product Specialist Patrick P.

Hi Paul, As long as your valve clamps onto the filter then this is the correct valve for you. If your valve bolts onto your filter then you would need this Jacuzzi 7 Way Bolt on Valve
 Reply

  • Commented on 5/25/2019 by Product Owner

    I attached a picture of my jacuzzi multiport unit that is leaking from the handle. is is attached by a clamp. It seems to be the correct unit but my unit's model number is 39263030 and your unit is 39263020K. is this the new model number. Just want to be sure before i order the unit and end up with something i cannot send back b/c i opened the package. thank you for your help

     Reply

    • Commented on 5/25/2019 by InyoPools Product Specialist Patrick P.

      Hi Paul, Thanks for the photos those are very helpful! Yes this will be the proper replacement valve for your valve shown in the photos.
       Reply


?     Asked on 5/8/2019by Tate

Is this complete with all the internal components, or is it just the body or shell? I have a jandy 7 pos. That is cracked where the pressure gauge screws in.. model# 39263105 DV ASSY 7-POS 1.5

 Reply

A  Answered on 5/9/2019 by Industry Professional

This is the complete valve replacement
 Reply


A  Answered on 5/8/2019 by Industry Professional

It is the complete valve just as pictured.
 Reply


?     Asked on 5/4/2019by Lisa

Im looking to replace my DV ASSY 7-pos 1 1/2 NPT V clamped part number 39-2630-20-R Is this the proper replacement?
 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Michelle B.

Hello,Yes, this would be the proper replacement.
 Reply


?     Asked on 9/6/2018by Dott Brackin

If get this part from you and it is the wrong one can I return it???
 Reply

A  Answered on 9/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Dott. Yes, you can. The product must be in new or unused condition with all original packaging. Please review our Return Policy
 Reply


?     Asked on 7/13/2018by John Pohl

Will this fit on Jandy pro series Multi-port valve # 39263105
 Reply

A  Answered on 7/13/2018 by InyoPools Product Specialist Lennox H.

Hi, John. Yes, this valve will replace the Jandy Pro Series Multi-Port Valve # 39263105. 
 Reply


?     Asked on 5/21/2018by Inyo Visitor

I need to replace 39-2630-20-R 7-Position Dial Valve w/O-Ring. Will this part work?
 Reply

A  Answered on 5/22/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this DVK -7C 39263020K will replace the 39-2630-20-R valve. The o-rings are included. 
 Reply


?     Asked on 5/16/2018by Daniel R. Yockey

Will this fit my Jacuzzi 225L filter
 Reply

A  Answered on 5/16/2018 by InyoPools Product Specialist Lennox H.

Hi, Daniel R. This DVK-7C valve will not fit the 225L, which is the bolt-on style model. You will need Part # 39262803R
 Reply


?     Asked on 3/17/2018by keith Duke

will this fit on a jacuzzi L160c
 Reply

A  Answered on 3/21/2018 by InyoPools Product Specialist Alex V.

Keith, Yes, this will fit the Jacuzzi Laser 160C. 
 Reply


?     Asked on 8/31/2017by michele

hello, i have a jacuzzi pump and i need to replace the clamp between the spheric filter and the head. the model is dv 2dvk-c7, the diameter of the clamp is 21 cm do you have it? thanks
 Reply

A  Answered on 8/31/2017 by InyoPools Product Specialist Andy O.

Hello Michele- The clamp for your Jacuzzi TM filter is Clamp Assembly (85813903).
 Reply


?     Asked on 8/29/2017by Amy

Needing a new complete multiport for a jacuzzi L160C sand filter. The info on the multiport says part number 39263105 and DV ASSY 7 POS 11/2"V-FLN it clamps onto the tank. Can you tell me what I need?
 Reply

A  Answered on 8/31/2017 by InyoPools Product Specialist Lennox H.

Hi, Amy. This DVK-7C Clamp Style Valve - 39263020K is the correct replacement valve that you'll need for your filter. 
 Reply


?     Asked on 7/26/2017by tanya

will this fit a assy 7-POS 1-1/2NPT del/modele 263009
 Reply

A  Answered on 7/30/2017 by InyoPools Product Specialist Lennox H.

Hi, Tanya. This clamp style valve will not fit, you will need the Carvin 7-Pos Valve Bolt-On - 39262803R as the replacement. 
 Reply


?     Asked on 7/14/2017by Ronnie

I have a Jacuzzi Laser filter md# L250c-7c. Is the 39263020k the correct replacement value for my filter?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Ronnie. Yes, this DVK-7C Valve - 39263020K is the correct replacement for the L250C-7C filter.
 Reply


?     Asked on 6/28/2017by Richard

I have a L192C clamp on valve with a split "to pool" connector. I guess I need a new valve, (link please) but wondered if you had a "screw over" link piece for that connector so I don't have to risk damaging a new one by screwing the hose link into it?
 Reply

A  Answered on 7/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Richard. The L192C filter valve is p/n 39263020K. You can use the Union - 400-4060 with this valve. 
 Reply


?     Asked on 6/5/2017by Randy

I have a jacuzzi laser ll model 192 sand filter with a clamp on valve. Is this the correct replacement valve, mine is a little different looking it is more ball shaped on top. I probably only need a new diverted kit will the dvk6/7 kit work on mine? Considering that the entire valve is not much more $ I would probably consider replacing over rebuilding. Thank you
 Reply

A  Answered on 6/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Randy. This DVK-7C Valve, Clamp Type is the correct replacement. It would be more convenient to replace the entire valve that rebuilding it.
 Reply


?     Asked on 5/22/2017by Inyo Visitor

My jacuzzi filter valve is 39263020R what dose the K stand for mine ends in a R?
 Reply

A  Answered on 5/22/2017 by InyoPools Product Specialist Patrick P.

This would be the valve you require, the "K" stands for kit.
 Reply


?     Asked on 5/17/2017by Brian Wheeler

I have a Jacuzzi 7 pos DV assy Model # 39-2631-05, clamp type, which is obsolete but it looks like this will work as a replacement. Can you please confirm. It is mounted to a Jacuzzi Laser L192C-7 Filter base. Thanks
 Reply

A  Answered on 5/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Brian. This DVK-7C Valve, Clamp Type will fit on the Jacuzzi Laser L192C-7 filter tank.
 Reply


?     Asked on 5/4/2017by Scott

I need to replace 2006 part 39263030 DV7 clamp on valve.. do you have or sub
 Reply

A  Answered on 5/5/2017 by InyoPools Product Specialist Lennox H.

Hi, Scott. This DVK-7C Clamp Type valve is the correct replacement.
 Reply


?     Asked on 3/1/2017by Chellethesouthernbelle

I have a jucuzzi 22160 6 port multivalve filter system with clamp style attachment, need a replacement.
 Reply

A  Answered on 3/1/2017 by InyoPools Product Specialist Scott W.

Yes, that is replacement clamp for the 6 port dial valve.
 Reply


?     Asked on 7/18/2016by Erik

Hi. I am trying to find a spider gasket for a Jacuzzi model #ss240. do you carry this part?
 Reply

A  Answered on 7/22/2016 by InyoPools Product Specialist Lennox H.

Hi Erik, I will need to know the model of the valve that you have in order to locate the correct spider gasket.
 Reply


?     Asked on 7/13/2016by Cathy

I have the Jacuzzi Flo Pro system SS240 and I need to replace the valve system. Which one do I buy. Do I need to measure the diameter of the unit?
 Reply

A  Answered on 7/17/2016 by InyoPools Product Specialist Lennox H.

Hi Cathy, The TM-12-H8, or 27515-154-000 Model valves are the valves that can be used with the Jacuzzi Flo Pro SS240 filter.
 Reply


?     Asked on 5/30/2016by Inyo Visitor

hi all i can find is my serial number 055711 can you tell me which valve i need i no its the clamp style thank you
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Matt S.

Hello, we would need to know at least the model number of the filter to determine the correct valve replacement.
 Reply


?     Asked on 5/24/2016by Rico

Hello, does this valve come complete with everything- including the pressure gauge & sight glass? How about the clamp and o-ring to connect?
 Reply

A  Answered on 5/24/2016 by InyoPools Product Specialist Patrick P.

Hi Rico, this valve comes with the pressure gauge and o-rings but does not come with the clamp. If you look at the Jacuzzi Laser Parts Diagram you can see that everything within Box #1 is included with the valve.
 Reply


?     Asked on 9/8/2015by ted

I have lazer tank the valve leaks there is a hole at gauge and I get air and water leak.is it a39-2630-20-r it clamps on you cant just buy gauge part thank you and do you have the valve
 Reply

A  Answered on 9/11/2015 by InyoPools Product Specialist Lennox H.

Hi Ted, If the valve body and the port for the pressure gauge is good you can replace just the pressure gauge. You can use either the Back Mount Pressure Gauge (102D-204D) or the Bottom Mount Pressure Gauge (101D-204D).
 Reply


?     Asked on 7/24/2015by Richard

I have a Jacuzzi sand filter on my swimming pool and I'm losing water through my drain line hose. The filter housing has a 7 position Dial Valve , Model # 39263009. Can you tell me if a bad gasket or O-ring seal would cause this problem. If so would I have to replace the entire valve or are there replacement Gaskets or O-rings that can be purchased separately to repair the existing valve.
 Reply

A  Answered on 7/24/2015 by InyoPools Product Specialist Charlie R.

Richard,You are correct in that the spider gasket within your valve may be the culprit causing the loss in water. We sell replacement parts for your valve, so ideally you would not have to replace the entire valve. All of the replacement parts we sell for your valve can be found on this page. The spider gasket is glued into the key assembly, which is the only way you can purchase it.
 Reply


?     Asked on 7/20/2015by Inyo Visitor

My current filter head # is 39263105 (Jacuzzi) will # 39263020K work as its replacement?
 Reply

A  Answered on 7/20/2015 by InyoPools Product Specialist Robert M.

The 39263020K is the correct replacement valve.
 Reply


?     Asked on 6/20/2015by Gary

Will this valve replace my model #39263009 for my Laser 190 L filter?
 Reply

A  Answered on 6/21/2015 by InyoPools Product Specialist Matt S.

Hello Gary, this valve will not work for your filter as the 39263009 is a bolt-on style Jacuzzi Laser Filter Valve and the this Jacuzzi 39263020K is for the Jacuzzi Laser Sand Filter Clamp Style. The correct replacement for your filter is the Jacuzzi 7-Way Valve 39262803R
 Reply


?     Asked on 6/7/2015by don

the part number I need is 39-2630-20-R this part number has a K at the end, will this still work to replace mine?
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Lennox H.

Don, The Dvk-7c Valve, Clamp Type (39263020K) will not work because it is a clamp style and the Valve Dial 7 Position (39262803R) is a bolt style.
 Reply


?     Asked on 5/31/2015by Paul

Hello, The valve assy. on my jacuzzi filter is leaking and need to replace it. Mine is fastened to the top of the filter canister with a 2 piece band with two clamping screws. #39263020K seems to be the right one, is that correct? It seems to be the only option not bolted down. Thank you
 Reply

A  Answered on 5/31/2015 by InyoPools Product Specialist Patrick P.

Hi Paul, You are correct the Jacuzzi 39263020K valve on this page is the correct valve for the Jacuzzi Laser Clamp style filter.
 Reply


?     Asked on 4/12/2015by David

Will this valve assembly fit the Jacuzzi Laser Model L190C-L?
 Reply

A  Answered on 4/13/2015 by InyoPools Product Specialist Robert M.

Hello David - If the valve is clamped onto the filter, the 39263020K is the correct valve.
 Reply


?     Asked on 2/22/2015by Bob

My existing top valve model number is 39263009 -DV-ASSY7-POS 1 1/2NPT which needs to be replaced. My tank model number is 94086250 which is fine. They are Jacuzzi. Thank you
 Reply

A  Answered on 2/23/2015 by InyoPools Product Specialist Charlie R.

Bob, Based upon the model # you provided, the correct Jacuzzi replacement valve is part # 26-105-1018
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers

1     0

Handle broke off the valve

Written on 11/30/2019 by Guest

Took off the broken valve
Replaced it with the INYO POOL.COM replacement.
Even a child could do it with instructions from INYOPOOLS.COM

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
7 Rating
5 star:
 
(7)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews