Compatible Pump Housing for Hayward® Super II® 2" ports w/ Unions - SPX3120AAZ

Part # 5110-072

By PureLine

  4.84 Average  

Details

Top

Part # 5110-072

Manufacturer Code SPX3120AAZ

Dimensions 12" L x 9.5" W x 11" D

Alternate Part #'s SPX3120AAZ, PL2740

Product Description

This is an After-Market Pump Housing with 2" plumbing ports, unions and drain plugs. This is an aftermarket pump housing by Pureline for the Hayward® Super II® Pump and is not the Hayward® original pump housing. This pump housing is a compatible replacement for the Hayward® Super II® pump housing and replaces the Hayward® O.E.M SPX3120AAZ® housing.

This pump housing comes with 2" unions, we highly recommend using the unions when installing this housing as it will allow for a quick disconnect for removing the pump during freezes. By using the included unions you also ensure the most water-tight seal to avoid any leaking. We suggest using a few wraps of Teflon tape on the threads of the unions for the most water-tight fit (Teflon tape purchased separately).

*This is an after-market replacement by Pureline and not the Hayward® original housing. 

Top

?     Asked on 7/21/2021by Inyo Visitor

Can I connect the suction and discharge using 2” male pipe thread fittings?
 Reply

A  Answered on 7/21/2021 by InyoPools Product Specialist Craig C.

Hello.  The PureLine Pump Housing for the Hayward Super II comes with Unions.  However, the inlet and discharge ports can be connected utilizing 2" Schedule 40 PVC Male Adapters.  (2" Threaded X 2" Slip)
 Reply


?     Asked on 2/21/2021by Richard Wayne Jaynes

I have a SP3015X20AX, will this housing replace it, thanks
 Reply

A  Answered on 2/22/2021 by InyoPools Product Specialist Hector F.

Hi Richard, the model SP3015X20AX does not come up in our system however if you have this Hayward Super II pump then this housing will work with your pump. 
 Reply


?     Asked on 3/7/2020by Daniel Faster

HOw can I tell if my pump housing is 1 1/2x 1 1/2 or 2 x 2? thanks
 Reply

A  Answered on 3/9/2020 by InyoPools Product Specialist Lennox H.

Hi, Daniel. You can physically measure the port or check the fitting specification used. 
 Reply


?     Asked on 3/2/2020by Nathaniel Seals

I have the SP3010EEAZ. Will this be the correct replacement for it?
 Reply

A  Answered on 3/2/2020 by InyoPools Product Specialist Lennox H.

Hi, Nathaniel. Yes, this is the correct replacement pump strainer. 
 Reply


?     Asked on 8/26/2019by jerry

My Haywood pump housing number plate is worn and the model number is not showing any longer how can I find the right pump housing and seal kit?
 Reply

A  Answered on 8/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Jerry. You can use our Replacing Parts For A Pump You Don’t Have A Model Number For guide to assist you. 
 Reply


?     Asked on 7/4/2019by Inyo Visitor

On 06/26 I asked : I have a Hayward SP3015EEZZ. WIll this housting fit my pump. If not, do you have a housing that will? Your Reply: A Answered on 6/29/2019 by InyoPools Product Specialist Lennox H. Hi, Tom. This Pump Housing - SPX3120AAZ will work if you have the Threaded Cover - SPX3100D. Otherwise, you will need P/N SPX3020AA which use the Knob Clamp Lid - SPX3000D. I am now asking: Will cover SP3100D work on SPX3120AAZ?

 Reply

A  Answered on 7/25/2019 by Industry Professional

SPX31020AAZ IS A THREADED STYLE PUMP HOUSING STRAINER, STRAINER COVER SPX3100D IS THREADED STYLE AND WILL WORK WITH THE PUMP HOUSING
 Reply


A  Answered on 7/26/2019 by Industry Professional

SPX3100D will work on the SPX3120AAZ
 Reply


A  Answered on 7/25/2019 by Industry Professional

Yes SPX3100D (35-150-3001 ) is the correct lid, you will also want o-ring part # 90-423-5438
 Reply


?     Asked on 6/29/2019by Tom Wilson

Thanks for the reply. Is the scew cover SP 3100D the same as SPX 3100D,

 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Hector F.

Yes, those are the same part. Just using alternate part numbers. 
 Reply


?     Asked on 6/28/2019by Tom Wilson

I have a Hayward SP3015EEZZ. WIll this housting fit my pump. If not, do you have a housing that will?
 Reply

A  Answered on 6/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Tom. This Pump Housing - SPX3120AAZ will work if you have the Threaded Cover - SPX3100D. Otherwise, you will need P/N SPX3020AA which use the Knob Clamp Lid - SPX3000D
 Reply


?     Asked on 4/7/2019by David Mallder

I was hoping to find out what is the box/package dimensions for this item: Pump Housing Strainer, 2" w/ Drain Plugs - SPX3120AAZ Also could please provide the gasket needed where the pump fits to the housing? Thank you! Regards, David
 Reply

A  Answered on 4/10/2019 by InyoPools Product Specialist Lennox H.

Hi, David. The shipping dimensions are 13" x 13" x 12" and the weight is 7.4 pounds. The Housing Gasket - SPX3000T is also available. 
 Reply


?     Asked on 10/29/2018by Lawankia

I need to replace the housing for my pump. SP3010X15AZ is the part number. Can I use this housing? The inlet/outlet is 2"
 Reply

A  Answered on 10/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Lawankia. Yes, this Pump Housing Strainer - SPX3120AAZ is the correct replacement. 
 Reply


?     Asked on 6/3/2018by Inyo Visitor

My pump will not self prime itself. It is a self priming pump. What would cause this.
 Reply

A  Answered on 6/3/2018 by InyoPools Product Specialist Lennox H.

Hi. They're several reasons a pump won't prime, check out our How To Determine Why a Pool Pump Won't PrimeHow To Prime a Pool Pump, and 8 Answers to “Why Is My Pool Pump Not Working?” guides to determine what's wrong. 
 Reply


?     Asked on 3/22/2018by Inyo Visitor

Does it come with the rubber seal gasket already installed?
 Reply

A  Answered on 3/23/2018 by InyoPools Product Specialist Joe S.

Good day, the seals will be extra you will need to order Tune Up Kit Hayward Super II - GOKIT2 for a chlorine pool or Saltwater Tune Up Kit Hayward Super II - GOKIT2SALT.
 Reply


?     Asked on 10/18/2017by David Rider

I need a replacement pump housing for a Hayward SP3020EEAZ pump. Is this part available?
 Reply

A  Answered on 10/18/2017 by InyoPools Product Specialist Lennox H.

Hi, David. This is the correct housing for model # SP3020EEAZ and it's available. 
 Reply


?     Asked on 10/8/2015by henry lattanzi

I need a replacement for pump housing # SPX3020-AA - is there a replacement available?
 Reply

A  Answered on 10/8/2015 by InyoPools Product Specialist Hector F.

Yes our part number for the replacement housing is 5110-07E.
 Reply


Top

Review Summary

 (Average 4.84  out of 5 stars)
6 Rating
5 star:
 
(5)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews