Does it come with the rubber seal gasket already installed?
Reply
Good day, the seals will be extra you will need to order Tune Up Kit Hayward Super II - GOKIT2 for a chlorine pool or Saltwater Tune Up Kit Hayward Super II - GOKIT2SALT.
Reply
My pump will not self prime itself. It is a self priming pump. What would cause this.
Reply
Hi. They're several reasons a pump won't prime, check out our How To Determine Why a Pool Pump Won't Prime, How To Prime a Pool Pump, and 8 Answers to “Why Is My Pool Pump Not Working?” guides to determine what's wrong.
Reply
I need to replace the housing for my pump. SP3010X15AZ is the part number. Can I use this housing? The inlet/outlet is 2"
Reply
Hi, Lawankia. Yes, this Pump Housing Strainer - SPX3120AAZ is the correct replacement.
Reply
I was hoping to find out what is the box/package dimensions for this item:
Pump Housing Strainer, 2" w/ Drain Plugs - SPX3120AAZ
Also could please provide the gasket needed where the pump fits to the housing? Thank you!
Regards, David
Reply
I have a Hayward SP3015EEZZ. WIll this housting fit my pump. If not, do you have a housing that will?
Reply
Hi, Tom. This Pump Housing - SPX3120AAZ will work if you have the Threaded Cover - SPX3100D. Otherwise, you will need P/N SPX3020AA which use the Knob Clamp Lid - SPX3000D.
Reply
On 06/26 I asked :
I have a Hayward SP3015EEZZ. WIll this housting fit my pump. If not, do you have a housing that will?
Your Reply:
A Answered on 6/29/2019 by InyoPools Product Specialist Lennox H.
Hi, Tom. This Pump Housing - SPX3120AAZ will work if you have the Threaded Cover - SPX3100D. Otherwise, you will need P/N SPX3020AA which use the Knob Clamp Lid - SPX3000D.
I am now asking: Will cover SP3100D work on SPX3120AAZ?
SPX31020AAZ IS A THREADED STYLE PUMP HOUSING STRAINER, STRAINER COVER SPX3100D IS THREADED STYLE AND WILL WORK WITH THE PUMP HOUSING
Reply
SPX3100D will work on the SPX3120AAZ
Reply
Yes SPX3100D (35-150-3001 ) is the correct lid, you will also want o-ring part # 90-423-5438
Reply
My Haywood pump housing number plate is worn and the model number is not showing any longer how can I find the right pump housing and seal kit?
Reply
Hi, Jerry. You can use our Replacing Parts For A Pump You Don’t Have A Model Number For guide to assist you.
Reply
I have a SP3015X20AX, will this housing replace it, thanks
Reply
Hi Richard, the model SP3015X20AX does not come up in our system however if you have this Hayward Super II pump then this housing will work with your pump.
Reply
Can I connect the suction and discharge using 2” male pipe thread fittings?
Reply
Hello. The PureLine Pump Housing for the Hayward Super II comes with Unions. However, the inlet and discharge ports can be connected utilizing 2" Schedule 40 PVC Male Adapters. (2" Threaded X 2" Slip)
Reply
