Motor, 1-1/2hp Full Tristar 115/208-230v (SPX3215Z1BER, HSQ1152, SP3215Z1BE, SPX3215Z1MR, SP3215Z1MR

$419.99

IN STOCK
FREE SHIPPING

Part # 5112-256

By Hayward Pool Products

  4.5 Average  

Details

Top

Part # 5112-256

Manufacturer Code SPX3215Z1BER

Alternate Part #'s 7-196337-20, HSQ1152, SP3215Z1BE, SP3215ZMR, SPX3215Z1BER, SPX3215ZMR, T63CXDCZ-1653, 35-150-1525, HAYSPX3215Z1BER

Product Description

Motor, 1-1/2hp Full Tristar 115/208-230v Single Speed Motor (SPX3215Z1BER, HSQ1152, SP3215Z1BER)

Product Specifications

HP:
1.5 HP
Service Factor:
1.6
Speed:
Single
RPM:
3450 RPM
Volts:
115/208-230 V
Top

?     Asked on 3/30/2022by Rich

Hi - I have the Hayword sp3215z1ber pump on my pool. We recently moved into the house and our first electric bill was quite high. do you happen to know if this pump is energy efficient? If not, can i just replace the motor with a more efficient one or should I replace the whole unit? Also, I assume variable speed pumps will give me better energy usage right? Thanks for any info you can share.
 Reply

A  Answered on 3/30/2022 by InyoPools Product Specialist Rich N.

Hi Rich, yes, a pool pump can account for 25% of your household electric bill, and with Title 20 being enforced in California, energy-efficient variable-speed pumps and motors are becoming mandatory.  There is no need to replace everything - just replace the motor.  This V-Green 2.7 HP Variable Speed Motor - ECM27SQU will be a perfect replacement for your old motor and, when it is set up properly, it can pay for itself with the energy savings you will get.
 Reply


?     Asked on 1/7/2022by Elias Martinez

Is this the correct motor replacement? Also what seal package do I get? I have the following Hayward pump. Pictures attached.

 Reply

A  Answered on 1/7/2022 by InyoPools Product Specialist Rich N.

Hi Elias and thank you for the pictures.  The SP3215Z1BE Motor, 1-1/2hp Full Tristar 115/208-230v will be a perfect replacement for your Hayward TriStar SP3200X Series Pump and the Hayward TriStar Tune Up Kit GOKIT81 will have all of the seals you will need while replacing the motor including the motor shaft seal.   
 Reply


?     Asked on 9/6/2020by Alfred KULHANEK

Is this the correct replacement for this? Do I need new seal kit?

 Reply

A  Answered on 12/18/2020 by InyoPools Product Specialist Hector F.

Hi Alfred, yes this is the correct single speed replacement motor for your motor. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. If you for sure have the Hayward Tristar pool pump series then the seal kit is the GOKIT81.To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
 Reply


?     Asked on 9/5/2020by Alfred KULHANEK

Do I need a seal or kit to CD replace
 Reply

A  Answered on 12/18/2020 by InyoPools Product Specialist Hector F.

Hi Alfred, if you have the Hayward Ecostar pool pump then the seal kit is the GOKIT81. If you do not have that pool pump series then for us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the seal kit.
 Reply


?     Asked on 6/21/2020by Sam

My pump says Emerson Model number K63CXFEN -4994 or SP3215Z1MR is this the one 2.20 Thp

 Reply

A  Answered on 6/21/2020 by InyoPools Product Specialist Hector F.

Yes, this is the correct replacement single speed motor for your motor part number SP3215Z1MR. 
 Reply


?     Asked on 12/14/2019by Todd

I have a SP3215Z1BE that needs to be replaced. Have I found the right replacement motor? The motor can be replaced independent of the trap section, correct?
 Reply

A  Answered on 12/16/2019 by InyoPools Product Specialist Megan C.

Hello,Thank you for contacting Inyo Pools. Yes, this is the correct motor you need. For the seals, can you please advise of the model number on your plastic housing?
 Reply


A  Answered on 9/6/2020 by Product Owner

Hello, I was wondering if they gave you the seal kit number with the new pump, thanks
 Reply


?     Asked on 9/29/2019by Neil

I have this (SP3215Z1BE), 1 1/2 HP motor to run the water features on our pool (7 scuppers). Not getting the desired flow, would like to increase the water volume/flow about 25%. What HP rating/model would you recommend. Thanks, Neil
 Reply

A  Answered on 10/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Neil. You will need to replace the following parts, Motor - SPX3220Z1BER, Impeller - SPX3220C, Diffuser w/ Impeller Ring - SPX3200B3, along with the Tune Up Kit - GOKIT81. You will also need to confirm that you have 2" or larger PVC pipes. 
 Reply


?     Asked on 12/28/2018by Annette

Is this motor quiet?
 Reply

A  Answered on 1/3/2019 by InyoPools Product Specialist Joe S.

Good afternoon, single speed motors would all have a Decibel rating between 65-67 dBs. Variable speed units would have a lower rating when you program them to run at the lower RPM's. Give us a call and we can discuss your options
 Reply


?     Asked on 5/3/2018by terry lopez

CAN THIS REPLACE PART 719633720 SERIAL02315J2 FRY56Y TYPE CP HP 1.5 VOLTS 115/208-230 I HAVE A HAYWARD ENERGYFLO RS SELF PRIMING PUMP
 Reply

A  Answered on 5/4/2018 by InyoPools Product Specialist Hector F.

Yes, this is the correct replacement motor for your model 7-196337-20  motor. 
 Reply


?     Asked on 4/12/2018by Hing

Can this replace a Hayward SP3215Z1BER model c? Thanks
 Reply

A  Answered on 4/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Hing. Yes, This motor is the direct replacement for your SP3215Z1BER / T63CXDCZ-1653 motor. 
 Reply


?     Asked on 9/24/2017by Rick

I have this exact motor but it suddenly stopped working. It started humming and impeller spins very slowly. I tested both capacitors and they are working. I also reset motor. But there is still a large hum. I am also looking for a better motor I can replace this with that is energy efficient.
 Reply

A  Answered on 9/25/2017 by InyoPools Product Specialist Lennox H.

Hi, Rick. Since both of the capacitors tested good, then the issue is internal. There is not a substitute energy efficient replacement for this Tristar motor. 
 Reply


?     Asked on 9/20/2017by Jim

Is this a new motor or rebuilt? Thanks
 Reply

A  Answered on 9/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim. This is a new motor. 
 Reply


?     Asked on 6/26/2017by Ray Hogenson

I have a Hayward TriStar 1-1/2 HP Part # SP32152EE The motor runs fine on both speeds, but will not start on high speed unless I first start it on low speed and switch it to high speed after it is running. Is this a capacitor problem and is it covered under warranty? Please advise. Thank you.
 Reply

A  Answered on 7/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Ray. The Capacitor is the problem, it's probably not holding a charge. The complete pump or motor comes with a 1 year warranty which will be covered under warranty. 
 Reply


?     Asked on 2/14/2017by KULWANT MONDER

is this single or double speed? is it possible to change this motor with variable speed one? I will really appreciate your input/
 Reply

A  Answered on 2/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Kulwant. This motor is a single speed motor and it can be replaced with a variable speed motor. The Century V-Green ECM27SQU motor would be the variable speed replacement.
 Reply


?     Asked on 7/14/2015by Inyo Visitor

My hot tub pump (Hayward SP3X3215Z1BE) makes a very loud noise when running. Sounds like a bearing. Do I need to replace the whole motor, or is there something else that could be causing the noise. Is there a rebuild kit available? Help.
 Reply

A  Answered on 7/16/2015 by InyoPools Product Specialist Lennox H.

Hi, We do not have a rebuilt kit for the 1-1/2hp Full Tristar 115/208-230v Motor, you can replace the bearings but you will have to the motor apart and provide us with the p/n off of the bearings. We have How To Replace the Bearings in a Pool Pump Motor - Part I & How To Replace the Bearings in a Pool Pump Motor - Part II to show you have to replace the bearings.
 Reply


?     Asked on 7/14/2015by Inyo Visitor

Do I need 1-1/2 hp pump on hot tub?
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Hector F.

This will depend on whether your current pump originally used this same model motor. If so then yes unless you decide to also replace the impeller and potentially the diffuser to match the horse power you decide to use.
 Reply


?     Asked on 6/26/2015by Gen

Hi , there Our motor pump that needs to be replaced is Hayward Tristar Max Rate Self Priming Pump SP3210Z1MR ..1.5 HP/1.10 SF /1.65 THP / Is this motor ( above ) compatible to replace the broken one we have ? Is there anything additional we have to purchase to replace the one we have ? Thank you ! G
 Reply

A  Answered on 6/26/2015 by InyoPools Product Specialist Hector F.

Yes this is the correct motor replacement. At the very minimum I recommend replacing the shaft seal which you have two options on key 13 that you can view here on the Tristar's parts diagram.
 Reply


?     Asked on 6/8/2015by Richard

What is the SF of this motor (part no. 5112-256) and the amps? Also how is it differant from the motor part no. B842 Thanks
 Reply

A  Answered on 6/8/2015 by InyoPools Product Specialist Patrick P.

Hi Richard, this Hayward Tristar replacement motor has a service factor (SF) of 1.60 for a True HP of 2.4 HP. The amp draw @ 115V is 20, @ 208V is 12 and @ 230V is 10. The B842 (B2842) can only be wired at 208V or 230V and not 115V and has a service factor of 1.47 for a True HP of 2.2 HP. If your current motor has a true HP of 2.4 and you replace with a motor which has a true HP of 2.2 then you run the risk that the smaller motor will be worked to hard and fail prematurely.
 Reply


?     Asked on 5/3/2015by Tim

I currently have the Hayward Tri-Star SP3205Z1BE pump which needs to be replaced. I have read that the replacing it with a variable speed pump will be much more efficient. 1.) If I replace the current pump with a variable speed pump, what pump would you recommend? 2.) Will it fit the current face plate attachment or would I need to reconfigure part or all of my system? Thank you, Tim
 Reply

A  Answered on 5/3/2015 by InyoPools Product Specialist Patrick P.

Hi Tim, Hayward now makes the Tristar Variable Speed Pool Pump which would be a drop in replacement for you current Hayward Tristar Pump making this a pretty easy DIY job. If you happen to have the Hayward ProLogic indoor control system then you would use the Hayward Tristar Variable Speed Pool Pump for Prologic Indoor Control Systems.
 Reply


?     Asked on 1/11/2015by Jack Henske

What is the GPM of the Hayward Tristar pump SP3215Z1BE? Thank you
 Reply

A  Answered on 1/12/2015 by InyoPools Product Specialist Robert M.

The GPM of a 1.5HP full rated Tri-Star depends on the feet of head. At 40' of head, the pump will push 137 gpm.
 Reply


?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top

Review Summary

 (Average 4.5  out of 5 stars)
4 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews