$706.99

Qty:

By Nidec Motor Corporation (formerly Emerson Motors)


Details

Top

Part # NPTQ270

Alternate Part #'s EMR-101-4024, NIDNPTQ270

Product Description

US/Nidec Neptune Variable Speed Motor 2.7 THP Square Flange 230V 48Y Frame

 

The Neptune™ 2.7 Total Horsepower (THP) variable speed pool pump motor is a premium efficiency product that includes a fully integrated motor, control, and user interface (UI). The product gives you programming flexibility and exceptional speed range capability. It is also designed to communicate and operate with a variety of external system controls, in addition to the on-board User Interface.

FEATURES:

  • Efficiency: 2.7THP 85% at 3450 RPM
  • Enclosure: Finned Aluminum enclosure providing a Water Ingress Protection level of IPX5 for long field life in outdoor environmental conditions
  • User Interface: Fully functional, easy to operate, capable of 90°, 180°, or 270° rotation
  • Rotation: Counter-clockwise (viewing motor shaft)
  • Low Temperature Monitor: Threshold temperature configurable in the UI
  • Fully Integrated: Designed for simple “Drop-In” installation with no complex wiring
  • Auxiliary Load Relay
  • Capable of communicating with specific pool control systems via MODBUS RTU
  • Capable of setting up to seven daily schedules
  • Adjustable priming time & speed
  • Menu keypad lockout
  • Designed for quiet operation
  • UL 1081 approved
  • Fully compliant with Title 20 regulations, CEC requirements and the proposed DOE Rule

Product Specifications

Amps:
11.1 amp
Volts:
230 V
Frame:
48Y
Total HP:
2.70 HP
Shaft:
Threaded
Flange:
Square
Manufacturer:
Nidec-Motor-Corp/US-Motors
Service Factor:
1.04
Warranty:
18-Months
Top

?     Asked on 5/31/2025by Kevin

Will this operate with iAqua controls? I am replacing a century M48AA66D58
 Reply

A  Answered on 6/2/2025 by InyoPools Product Specialist Robert M.

Yes, the US/Nidec Neptune Variable Speed Motor (Model NPTQ270) is compatible with Jandy iAquaLink controls, including the AquaLink RS, iAquaLink 3.1, and TCX systems. This compatibility is achieved through the motor's RS-485 communication port, which supports Modbus RTU protocol, allowing seamless integration with various pool automation systems.
 Reply


?     Asked on 6/2/2025by Mark K McDonough

Can you please provide the measurements, Specifically how tall the motor is from bottom to top of the motor control lid. Thanks
 Reply

A  Answered on 6/2/2025 by InyoPools Product Specialist Robert M.

The height from the bottom of the motor to the top is 12". That is with the cover door closed. When opening the cover door, the highest point from the bottom of the motor to the top of the cover is 17".
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

Motor failure

Written on 9/9/2024 by Guest

The new motor was received in a timely fashion. It was easily installed. The motor worked well. I’m pleased with the transaction.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)