Will this work as replacement for MPRA6F-148L
Reply
Al, The MPRA6F-148L is a full rated pump. I would recommend replacing it with the Sta- Rite Max-E-Pro P6E6F207L
Reply
What are the GPM on your 1.5 hp
Reply
Hello! The Supermax 1.5 hp PHK2RA6F103L has the following GPM ratings at vairous TDH in feet of water:At 40ft it has a GPM of about 80At 30ft it has a GPM of about 90And at 20ft it has a GPM of about 100.
Reply
Whats the best replacement pump for Sta-rite JWPAS5F-2A4?
Reply
Hello Roseanne - The JWPA series was discontinued. The manufacturer recommends the Dynamo model 340210 as a replacement. The Dynamo is an above ground pool pump. It comes with a standard 110v 3-prong plug.
Reply
My original pump was a 1 hp P2R5E 125L. The pump i have now is labeled 1hp but also has a 1-1/2hp. is this a heavy duty motor or is this too much pump?
Reply
Dale - The 1-1/2 HP would not be too much. The total HP (HP x SF) of your current pump and the PHK2RA6F103L are the same (1.65).
Reply
Hi, I need to replace a sta-rite 1.5hp pool pump part# jwps5fl-a2 serial# 40161690900534 Will this pump match what i need?
Reply
Hi Dave, The Sta-Rite Dynamo 1-1/2 HP Pump would be the correct replacement for your jwps5fl-a2 pump.
Reply
I want to replace my 1.5 hp motor with .5 hp will it fit on same pump the pump model# phk2ra6f-103l
Reply
Can I replace a water ace 96r5 with this pump.
Reply
Hi DD, The Super Max 1.5 HP Pump (PHK2RA6F103L) can be used to replace the Water Ace 96R5 Pump. It would require you to have to re-plumb the Super Max pump.
Reply
I am a programing digital pump dummy. I have a less than 1 yr. old Sta-Rite Super Max v6 variable speed pump. It is programmed for hours to run, it needs to be reset and I don't have a clue how. Power is on, lights are on, but it does not start, no hum, jut doesn't start. Will a manual help me? or any ideas. I am in Fla. so it runs daily all year.
Reply
Here is a link to the Installation and Users Guide http://www.pentairpool.com/pdfs/SuperFloVS1.5OM.pdf or click here to view. It provides step-by-step instructions. Your other option is to contact a Certified Pool Technician to provide service for you at your home.
Reply
what would the correct replacement pump for the Sta Rite Max E Glass II -1 1/2 hp
Reply
Hi Jason, This pump will not replace a Sta Rite Max E Glass II pump performance and or dimensional wise exactly. To find out if this pump will work for you I would recommend reviewing out How To: Size a Pool Pump guide.
Reply
Need a Waterco pump model 112400
Reply
Unfortunately this pump is no longer available, I personally like the PureLine Prime Pumps.
Reply
Is Sta-Rite Dura Glas P2RA5F-182L uprated 1.5HP the Sta-Rite 1.5 HP PHK2KA6F- 103L pump a replacement pump for the discontinued pump. Is there a better single speed alternative? Thanks.
Reply
Mark, I think you are looking for this pumpSuper Max 1.5 HP Pump - PHK2RA6F103L. It is In stock
Reply
We have a old spa with a 1 1/2 hp sta rite max e glass pump (#p2r5yf-126l). Would this pump be a good replacement for it. Thank you
Reply
Good Morning Rob, If you are replacing your current pump than yes, This would be a great alternative pump. You could also replace just the motor and I would recommend the A.O. Smith 1 1/2 H.P Square Flange Up Rate Motor - USQ1152. If you buy the entire all you need is to plumb and wire it if your switch the motor out you will need to replace the shaft seal and all of the o-rings I would recommend the Tune Up Kit Starite P4E & P4EA. If yMax-E-Glas II / DuraGlas II - GOKIT38 . If you need anything else feel free to ask.
Reply
I purchased a USQ1152 motor on 4/1/2016. I need the Sta Rite pump for the 1 1/2 HP. What can I have ?
Reply
Hi. The USQ1152 motor can be used with several different model pump including this Super Max 1.5 HP Pump - PHK2RA6F103L. To determine what pump you'll need is based on you pools needs. You can use our How to Size a Pool Pump for Your In-Ground Pool guide.
Reply
Can we just purchase the filter housing and not the pump motor itself for this pump? Thanks
Reply
Hi, Robert. The Volute - Black - 351089 along with other parts for this pump can be purchased separately and can be found using the Sta-Rite Super Max Parts Diagram.
Reply
Is this pump an easy drop replacement for the similar 1HP model (PHK2RA6E102L)? Meaning they have the same intake height, lateral spacing between intake and discharge, and discharge height?
Reply
Hi, Brent. Yes, this Super Max 1.5 HP Pump - PHK2RA6F103L will be a drop-in replacement for the Super Max 1 HP Pump PHK2RA6E102L.
Reply
Is this pump a drop in replacement for Sta-rite model# MPFA6E-146L?
Reply
Hi D.J, From a power and flow standpoint it would be a replacement for the MPFA6E-146L. However, from a plumbing standpoint, it is not a drop in replacement and there is not a drop-in replacement for the MPFA6E-146L. The plumbing ports are not in the exact same spot as your current pump so you will have a little re-plumbing. I really like the PL2602 PureLine Prime 1.5 HP Pump the PureLine Prime Pumps uses a top of the line Century Motor and are priced pretty reasonably.
Reply
I want to replace my motor and pump. I currently have a 1.5 hp single speed sta-rite motor and pump and I've been looking at several of the products including the pure line and the sta- rite but I measured my port openings and they are 2 3/8 inch will would be the best replacement pump and motor system for me.
Reply
Hi Bill, If your port openings measure 2-3/8" then you have 2" ports, here is a good Article on The True Pool Plumbing Dimensions I would suggest the 1.5 HP PureLine Prime as great replacement pump for the Sta-Rite, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing.
Reply
do you have something similar that match the ports so I dont have any plumbing to do. I dont care if it is more expensive
Reply
Could you send a few photos of your pump as those will be quite helpful. If you send photos then take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
Reply
We have this model number for our inground pool pump, PHK2RA6F-103L. Do you carry the capacitor as a replacement part?
Reply
We may carry the capacitor for your motor however, we will need the specific motor model or part number to confirm for you.
Reply
How many gpm will this pump pump to my filter with 1.5 piping?
Reply
Good day, in order to find out the Gallons Per Minute we would need to find out the distance between the pool and the pump.
Reply
10 to 12 feet
Reply
i HAVE THIS PUMP NOW WITH A 60 GPM SAND FILTER WITH 1.5 PIPING. i HAVE 26,000 GALLON REC. INGROUND POOL. IS THIS GOOD PUMP FOR POOL AND FILTER I CURRENTLY HAVE.
Reply
ROUGHLY 10 FEET
Reply
My super Max STA-RITE model needs to be replaced and I would like to change it to a Variable Speed model. What variable speed model would you advise.
Also the filter needs to be replaced.
Hi PG, Our suggestion would be this 1.65 HP Waterway Power Defender Variable Speed Pump and this Waterway 200 Sq. Ft. Cartridge Filter
Reply
thank you very much.
Reply
I have a Sta-rite PHK2RA6F-103L that needs replacing. What pump system would be a plumbing match for ease of installation?
Reply
Hi Sheila, we do not have anything that would be an exact drop-in replacement for your SuperMax pump, but we do carry everything you would need to get it running again. Replacing the motor and the motor shaft seal would be much more economical as well. Send us pictures of your motor and pump and any labels on them and we can recommend exactly what you need to get it running again.
Reply
