Our Dolphin Supreme M3 is over 3 years old and no longer under warranty. We have taken it to a local dealer to find out that it is the cable (9995861) that needs replaced. Is this something that we can do ourselves? From what I've researched online it sounds like the DIY cable does NOT have loose wires and looks as if it more or less just "plugs in." Any information on this would be greatly appreciated. Thank you!
Reply
Hi, The Dolphin Pool Cleaner Cable with Swivel (9995861-DIY) can be installed by the owner. We do not have an instructional video showing how to install it but you can give Maytronics a call.
Reply
Making sure this is the power cable for my Dolphin cleaner. The part # 9995861-DIY was given to me by Dolphin Matronics. My dog chewed the power cable in half. I saw from another review/post that I can install the new power cable. I was confused that the description was "cable and swivel". 18 M is length? DIAC DC with ends, not sure what that is.
Reply
Hi Teresa, The 18M stands for the length in meters and it already have the ends which is the connector to the unit and power supply.
Reply
I have a dolphin dx5 is this the cable I need to replace it?
Reply
Good morning Justin, Here are all the available parts. Maytronics Dolphin DX5 Parts
Reply
Do I need a special toll to remove the old cable from the cleaner?
Reply
Phil, No special tools are needed. You can use this how to guide for reference.
Reply
I have a dolphin deluxe 3 and need a new blue cord - how do I find my model # and which correct part to order? I ordered what I thought was the correct one, but it only has two prongs and my previous one had four prongs, as does my power supply unit. Please help!!
Thanks in advance!
~Carolee
Reply
If you have ordered the cord and it is incorrect, I recommend contacting Maytronics directly at (888) 365-7446 with the serial number. The serial number is usually located inside of the robotic cleaner. The will confirm the part number needed for the cleaner.
Reply
I thought I ordered a 60' chord with metal spring and molded 3 prong plug. I rcvd a 60'chord with rubber spring and hexagonal screw on plastic wire cap vice the needed circular plastic screw in plug to the top of the motor unit. There was no invoice slip in the box. The 3 prong connector is correctly grooved though. Is there a way/procedure to remove the 3 prong plug so I can slide off the cap and replace with my circular plug -OR- exchange the cable?
Reply
Hi, Mike_P. Thank you for your inquiry. According to your order info, you ordered P/N 9995872-DIY. If you did NOT receive what was ordered, please provide us with a picture of the received item P/N which is located on a tag or packaging so that we can resolve this matter for you.
Reply
I have a Dolphin Atlantis and just need the 2 wire 1.2M cord from swivel to motor plug.
The cord on my Dolphin Active 30i gets tangled and twist. What can be done to correct this problem
Reply
Hi, Gene. If your cable does not have a swivel, you can replace the cable with one that does, P/N 99958906-DIY.
Reply
Will this cord work from the power supply to the robot on my Proteus DX5i? My dog chewed through mine.
Used on the following Maytronics Dolphin Robotic Pool Cleaners:Advantage Commander Sprite Interactive Explorer 2001DX3sDeluxe Cl1OrionSupreme M3 Nautilus Endeavor Atlantis Saturn DX5 Quest Primal Neptune
Reply
Can this cable work with the Dolphin Supreme M-4
Reply
Good day,The cable that would be needed is the 60' Cable,Swivel,DIY Plug,Metal Spring,3W - 9995872-DIY. Also, used on the following Used on the following Maytronics Dolphin Robotic Pool Cleaners:DiscoveryDX5 PlusSupreme M4Supreme M5ApolloApollo PlusDX6EdgePremierTritonWave 65C3Dx4
Reply
I have the Dolphin S50 and was sold the MAY P/N 9995872-DIY, but I don’t think it is the correct cable.
Hi Ted, the correct cable is actually part number 9995872-DIY which you can view by clicking here.
Reply
i have the dolphin PREMIER. will this part, 9995861-DIY, work?
Reply
Good day, Ethan, the correct cable would be the 60' Cable, Swivel, DIY Plug, Metal Spring,3W - 9995872-DIY. Used on the following Maytronics Dolphin Robotic Pool Cleaners: Discovery DX5 Plus Supreme M4Supreme M5 Apollo Apollo Plus DX6 Edge Premier Triton Wave 65C3Dx4
Reply
I have a Dolphin Deluxe 4 (B70758SJBD). I am in need of a swivel cable -- the model I have has the cable coming out of the top of the Dolphin. Which cable should I order?
Reply
Hi Dawn for the Dolphin Deluxe 4 with the cable coming out of the top of the cleaner you will require this 9995872-DIY Dolphin Deluxe 4 Cable and not the cable listed on this product page.
Reply
Hi, is this the correct replacement cable for 99996113-US (Nautilus cc bought 4 yrs back)?
And can the cable be replaced by the owner? Thanks.
Reply
Hello. The Maytronics 60' Cable, Swivel, DIY, Metal Spring (9995861-DIY) and the 60' Cable, Swivel, DIY, Rubber Spring (9995862-DIY) are both compatible floating cable replacements for the Nautilus Cleaner. Please note the difference being the Metal Spring and the Rubber Spring located on the cable. Choose the replacement cable that matches your current cable. Attached please find a brief tutorial on how to replace the floating cable on a Maytronics Dolphin Cleaner. 60' Cable,Swivel,DIY Plug,Rubber Spring,2W - 9995862-DIY How to Replace a Maytronics Dolphin Pool Cleaner Cable - TOP Connect
Reply
Will this cable work with a Dolphin Active 10? If not which cable which will work with this cleaner?
Used on the following Maytronics Dolphin Robotic Pool Cleaners:Advantage Commander Sprite Interactive Explorer 2001DX3sDeluxe Cl1 Orion Supreme M3Nautilus Endeavor Atlantis Saturn DX5 Quest Primal Neptune. You will need to order 60' 2 Wire Cable, DIY Plug no swivel - 99958903-DIY
Reply
