Does the above gasket set have one for the large niche and one for the small niche? I need one of each. How do I order?
Regards
John
Reply
Hello John - The LPL-G-P is the large pool gasket for the Amerlite. The spa gasket is sold separately, Part number LPL-M-G-P is the SpaBrite gasket.
Reply
My light says, "American Products Company 3915". It doesn't appear to have any other markings. Is this gasket compatible?
Reply
HI Lou, This Guardian Silicone Lens Gasket is compatible with the American Products in-ground pool light fixture.
Reply
whqt are the dimensions of this gasket. my pool was installed in 1977 and I'm having a hard time finding the right size for my light the 8 3/8 pentair gasket is a little too small.
.
Reply
The dimensions of this large gasket are 8-1/2" L X 8-1/2" X 1/2" D.
Reply
American Products Lights
# N-847744
N-831828
Same lights, glass diameter is:4 1/16" X3/16" thickness
I need gaskets, silicon preferred.
In bad need of these or information as to where they could be located.
These were installed in 1999.
Thanks for you time.
Sam
Reply
Hi Sam, you will need the Pentair SpaBrite Guardian Silicone Lens Gasket (LPL-M-G-P).
Reply
the number on my light says T-702552 by pentair. about 13 years old. will this gasket fit?
Reply
Hi John, We're unable to confirm if this gasket will fit based on the info provided. We will need the series and or the model number of the light.
Reply
I have a Pentair light system in my inground pool . the bulbs have burnt out. the only numbers i could find are MR16 71W 165 WATTS 120 VOLTS. I was wondering if you could help me locate these. they are 4 color changing bulbs
Reply
Hi Cliff, You would have the Pentair SAM light and that light uses this Pentair SAM Replacement Bulb the bulb is used for both the 12V and 120V models.
Reply
I live in San Antonio, TX and have an old Gary Pool. The only label I can find on the pool light fixture is a UL Underwater light label that says Model 425 and uses an R40 light bulb. The gasket seal for the lens is 7 and 3/4" diameter.
I would like to upgrade with an LED kit but I have no idea what kit will fit/work. Any help would be appreciated.
Reply
The only numbers on my Pentair Amerlite that I can find are 7884xx, 7844xx, 7894xx. Will this heavy duty gasket work for me? Thanks
Reply
Hi, Leo. Yes, this Extra Heavy Duty Gasket will fit your fixture.
Reply
Thank you for answering my question on the heavy duty gasket. Can you recommend as an LED bulb replacement. I don't need the color changing option. Thank you again My Pentair amerlite says 7884xx, 7844xx, 7894xx
Reply
Hi, Leo. You can use one of the following Pool LED bulbs listed on our LED Pool Light Bulbs page.
Reply
Which side of the gasket goes against the casing? The gasket is different than the amerilite. The J&J has one side with the rib and the other is flat. I can't find any guidance on this anywhere.
Reply
Hi, Mystierob. This Guardian Silicone Amerlite does not have an installation orientation. You may have received an incorrect or defective part.
Reply
i have a hayward light spo607u niche can i put a amerlite in it.the spo607u is 12" and the amerlite is 8.75"
Reply
Hi, Renie. They've been a compatibility issue with using a Pentair fixture with a Hayward Niche. You may have to use an adapter ring. The Hayward Astrolite Fixture is compatible.
Reply
Hi I am looking for a gasket for the name on my pool light lens "American Product 3915" is this the correct gasket? I do not think mine is an Led light. Please help!!
Hi, Leigh-Ann. This Amerlite Extra Heavy Duty Lens Gasket will work as a replacement.
Reply
Will the Guardian Advantage work with American Products 120V 7885xx, 7845xx, 7895xx (all three numbers are on the housing)?
Thanks, Larry Selna
Reply
I pulled out my spa light. I want to get the better of the gaskets when I reinstall the lens. The portion of the fixture that I pulled out has American Pool Products on the lens. The print on the label is badly deteriorated but I can determine 7810xx. Will this gasket work?
Reply
Trying to find the right gasket for my light, found a tag inside the fixture reads American Products Model 7821xxxx fixture housing (concrete) my glass measures 8" over all width.
It is difficult to confirm which model you have with the label as it suggests to use a certain fixture that is the Pentair Amerlite Pool Light and the image of the lens provided appears to be very close to the Sta-Rite Sunglow Light We will need to see the image of the front of the lens and faceplate for further review.
Reply
I have an american products light in need of a new gasket. The old gasket is a little over 10 inches. What part number do I need?
Reply
Hi Chuck, Can you provide us with the model number of the light? It should be on the rear label of it. If not could you send us a few photos of the lens and entire fixture? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Hello I have a 1998 inground pool with an American Products light in it. The white gasket (ID 7 3/4" x 3/4", OD 9 7/8"). I need to replace the gasket for this light. The lens reads American Products, #3915. The pool was just refinished and the company changed the bezel to a new Stainless version with a spring clamp to hold it in place. I think the process of removing the old bezel and clamping the new into place broke the seal. I was looking to replace gasket.
Thank you for contacting Inyo Pools, Guardian Silicone Lens Extra Heavy Duty Gasket for Pentair Amerlite - LPL-G-P Is the right gasket for your pool light
Reply
I am trying to find a replacement gasket for my pool light. I have attached pictures of the housing.
