Part # W3SP15932S
Warranty 1 Year
Manufacturer Code SP15932S
Power-Flo Matrix Above-Ground Pump Series
The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance.
The high-quality Noryl impeller offers wide openings to prevent leaf and debris clog. While this pump is impressively equipped, the PowerFlo Matrix is also very efficient. It has a heat-resistant, double-size seal and a protected rear-mounted switch for high-energy efficiency. Plus, its heavy-duty, high-performance motor provides years of trouble-free operation thanks to an integrated automatic thermal overload protector. PowerFlow Matrix clearly the superior choice in above-ground-pool pumps.
The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.
Performance Data:
Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)
| Model # | 10 Ft. | 20 Ft. | 30 Ft. | 40 Ft. | 50 Ft. |
| SP1591 | 80 | 76 | 64 | 44 | -- |
| SP1592 | 86 | 86 | 75 | 58 | 27 |
| SP1593 | 91 | 91 | 80 | 62 | 32 |
Specs:
Applications & Pump Features
• Above-ground/on-ground pools
• On/Off Switch
• The above-ground industry's largest strainer basket for large debris collection with minimal maintenance
• Horizontal/vertical discharge feature -- simply converts from vertical to horizontal discharge orientation with the press of a button
• Quick disconnect intake and discharge pipe connection
• C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for hassle-free maintenance
• Heavy-duty, high performance motor with integrated automatic thermal overload protector for years of operation
• High quality Noryl impeller with wide openings to prevent clogging by leaves and debris
• Durable, corrosion-proof housing for years of dependable service and all-weather performance
• Heat-resistant, double-sized seal for long-lasting efficiency
• Energy-efficient, protected rear mounted switch
• Integral drain plug for easy winterization of pump
PowerFlo MatriX Benefits
• Features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance.
• Converts from horizontal to vertical orientation at the press of a button.
• Quick connect/disconnect intake and discharge connection.
Click here for more Hayward Pool Pumps
Hi-- I'm interested in the Hayward SP15932S 1.5HP and the Hayward SP15922S 1HP. What is the current (Amperage) draw of both of these at full speed? At 1/2 speed?
What is the flow rate (GPM) for each of these at half speed and 10ft head?
Thanks!
full speed flow rates:
SP1592 86 86 75 58 27
SP1593 91 91 80 62 32
Reply
I am installing an ag 18x54 pool with a main drain. I was thinking about a two speed motor 1.5/.75 hp.
Is this the one I would need or would you recommend another? Also, I was thinking about going with a 220v motor.
I have the ability to use either voltage.
Reply
Hi Dan, the Hayward Matrix Pump 1.5 HP Dual Speed - SP15932S will work well for your application.
Reply
My current pump is a dual speed 1.5hp with a twist lock cord. I noticed this one says it is 3 prong? Is this pump available with a twist lock cord, or can it easily be switched from one pump to the next?
Reply
Will the ST15932S work on a hot tube. I do not need the strainer/ basket it is built in to the tube. The motor was a Hayward SP1515-Z-24-E 115v 1.5-.18 3450/1725 rpm. The tube has the high/low switch for the jets. It is a 4 prong with red to high and black to low.
Reply
Yes, the SP15932S will replace your current SP1515.
Reply
Do any of these pumps have a decent warranty if purchased online. Looking to replace a starite P2R
Reply
The Sta-Rite Max-E-Pro would be a great replacement for your current Sta-Rite Dura-Glas. There is a 1.5HP dual speed option as well, part number P6RA6YF206L.
Reply
Hi, my Hayward model sp57152cp is shot. From looking at replacement pumps the sp15932s seems to be the best choice, I think? With my old pump the 2 speeds are controlled with a rocker switch, low-off-high. Does the dual speeds on the sp15932s work the same way?
Reply
Yes, it has a toggle switch that allows you to switch from high to low and low to high.
Reply
Hi, I have the Hayward SP 1515. I want to connect the ground wire. Does it get connected to the screw under the on off switch? Thanks, Matt
Reply
Hi Matt, The ground wire which is "green" is located near the power terminal and bonding lug is located under the motor end cover near the on/off switch.
Reply
my 12 yr old Hayward swimpro pump for my 24'by 48" pool bout shot it is dual speed and says 2and 1/16 hors power what is a decent pump to replace with and does it need to be dual speed
Reply
This unit will be your best option to switch out the current unit you have.
Reply
I am replacing my old Sta-rite pump that has burned out. It was a JWPS5FL-A2. I am using a Sta-rite sand filter T-210WF. 2.18, 44 gpm,20, 50 psi, 200lbs sand. I have ordered a Hayward Matrix Powerflo 1.5 dual speed pump as a replacement. My pool is 46x18 oval at 52 high. I am trying to go with this pump due to the energy savings and looking at solar. All my pluming is hard piped. I have a Union on the pump to filter line for easier repair or replacement. Is this a good match or will it work ok?
Reply
Hi Hank, The Hayward SP15932S model pump is a good replacement pump. I'm not certain if the hose with connector will match up if not you will need the MPT to Buttress Adapter.
Reply
I have a 42ft x 22ft oval with 52in walls. Will this 1.5 hp pump be sufficient or do I need a 2hp?
Reply
Hi Chris, This 1.5 HP pump would be sufficient for a pool your size depending on your size filter and desire run time.
Reply
I am replacing my 1.5 HP broken pump with a Hayward pump. Given that I have a small size pool (in the order of 15,000 gallons), feeding Hayward star clear plus filter system C12002. I have both intake and discharge to be 2 inches. The 1.5 hp Hayward pumps are all 1.5" intake and discharge. There s 2 hp pump with 2" requirement fulfilled but it sounds too much. What do you suggest ?
Reply
With a C12002 model filter you do not want to go any stronger on your motor for that is too much pressure. Though the ports are 1.5 inches on that pump you can still install it with 2 inch lines. You just need reducer fittings to install.
Reply
I came home today and turned on the pool pump Hayward model SP15932S it just makes a humming sound on either speed. It was working fine when I turned it off this morning do you think it's the motor or that the pump impeller may have jammed somehow?
Reply
Hi Joe, You can take apart the pump and inspect it but it sounds like the motor capacitor or entire motor needs to be replaced. You can view our blog on Pool Motor Troubleshooting for more detail info.
Reply
My pump died on a 24ft above ground pool. Filter on pool i previously upgraded to Hayward S180t, however at that time i did not replace the original waterway 1hp pump unit. From reading online I find that a Hayward 1.5hp pump is what the replacement should be. Question I have is why would I want a 2 speed vs a 1 speed, it appears Hayward makes this setup in either or speed.
Reply
Hi Mark, A dual speed pump will allow operate your pool on a lower speed to save on energy cost, you will have to have the pump run longer but you will save on energy versus a single speed pump.
Reply
Need to replace my Sta-Rite Model JWPAS5F-2A4 pump and motor (motor model S48B74A03 HP 1.5 with 2" inflow and discharge. Is this pump and motor a good replacement? Can I get it with 2" rather then 1.5" intake?
Reply
I would actually suggest the Sta-Rite Dynamo Pump here as it is very similar to your JWPA pump which will mean the plumbing will be easier. The Dynamo pump does have 1-1/2" ports but we do carry 1-1/2" x 2" unions which would easily adapt this pump for 2" plumbing.
Reply
Currently the Hayward on now not working, it is a 2HP, should I remain 2HP or can I use a 1.5HP?
Reply
Jose, If you're current pool pump is a 2 hp you should replace it with a 2 hp. You do not want to run into complications with the pool if the 1 1/2 hp is not strong enough.
Reply
How many gallons per minute/hour does this pump create?
Reply
Hello Wayne - This pump will push a maximum of 91 gallons per minute on the high speed. This volume will decrease if the feet of head is greater than 20'.
Reply
How does the pump switch speeds? Does it require a specific controller that is not included?
Reply
Hello Trevor - On the back of the motor there is a 3 way toggle switch for high / low. It is a manual operation , but does not require a special timer mechanism.
Reply
What are the amps at high speed and low speed? Also, does the pump have a plug and how long is the cord?
Reply
The amps are 16.4 on the high speed and 4.4 on the low speed. The cord is 6' long and has a 3-prong plug.
Reply
What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
Reply
This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.
Reply
The Most Helpful Review
17 1
(4 out of 5 stars) Hayward 1.5 HP pump
Reviewed By: T-Bone from Bluffton, IN ()
Pros: Excellent pump, love the new clean out basket design
Cons: none
The updated design from our last hayward was excellent. The new basket clean out is awesome and screwing the lid on is much be easier and attaches easier than the previous model.
Was this review helpful to you?
The Most Recent Reviews
2 0
(5 out of 5 stars) GREAT ABOVE GROUND PUMP
Reviewed By: Michael W. from Pataskala, OH ()
Pros: Quiet and energy efficient,
Cons: None
Replaced Sta-rite single speed with this 2 speed pump, had to replace union for new pump, but easy to do, installation was easy. NEW Hayward pump works great, switches form low to high speed very quick and easy. Will save you money.
Was this review helpful to you?
(4 out of 5 stars) Good quality product.
Reviewed By: Michael B. from Rices Landing ,PA ()
Pros: Much Improved design over older models.Motor runs cooler than previous pump.
Cons: Motor seems to have slightly less power than the older pump motor.
I purchased this pump as a replacement for a previous Hayward pump that i have had for 12 years.It was very easy to install and attach to my existing filter.Pump seems to be made very well and the quality is very good.The power switch and pumps design is much improved over my old pump.The motor seems to be not as strong as my older model,but it doesn't get as hot as the older model,which in my opinion is a good trade off.I expect to get 10 years or more,reliable service from this pump.
Was this review helpful to you?
1 0
(5 out of 5 stars) Hayward Matrix 1.5HP dual speed
Reviewed By: Corey C. from Attleboro, MA ()
Excellent pump. INYO service is excellent as well. First pump arrived damaged. After a few conversations and emails a new one was shipped and received in perfect condition. INYO was very easy to deal with. Pump is powerful and quiet. Low speed pumps fairly high volume and only consumes 2.9amps. Very user friendly. Only complaint is the bulkhead fitting that connects the pump outlet is 2.5"FPT rather than 3" which is far more standard. Since this is a pressureized connection it was a bit of fussing to get this connection adapted. However, I wouldn't hold this against Hayward... and in no way does it reduce my satisfaction with this product.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great pump
Reviewed By: Wendi S. from Ashland City, TN ()
Pros: Quiet, good suction on both settings
Works great and is very quiet. I especially like the dual settings.
Was this review helpful to you?
1 0
(5 out of 5 stars) Super 2 speed pump!
Reviewed By: Gatordog007 from Soddy Daisy, TN ()
Pros: 2 speeds and powerful
Cons: none
Bought this as a replacement for a cheap Emerson. It's quiet, 2 speed which I got used to and can't live w/o. Makes back-flushing and rinsing a 30 second job. Super pump and an outstanding deal.
Was this review helpful to you?