Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78

$33.95

IN STOCK
FREE SHIPPING

Part # GOKIT78

By Aladdin

  4.79 Average  

Details

Top

Part # GOKIT78

Alternate Part #'s PL1078, 90-538-2078, ALDGO-KIT78, APCK1183

Product Description

Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax

Top

?     Asked on 6/15/2022by Mike Del Ninno

I have a Pentair SuperFlo 340037 and a Pentair Motor 196237 .5 HP. Can you recommend motor and KIT for replacement? Thanks.

 Reply

A  Answered on 6/15/2022 by InyoPools Product Specialist Craig C.

Hello Mike.  The Century 1/2 HP Square Flange 56Y Full Rate Motor - B2846 is a compatible motor replacement for the Pentair Motor 196237.   The Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 contains the parts necessary to complete the motor replacement.
 Reply


?     Asked on 5/16/2022by Joe

I have a Waterway Mustang 56 frame pump. I am planning on replacing the motor with a B2854. Are these the correct seals?
 Reply

A  Answered on 5/17/2022 by InyoPools Product Specialist Craig C.

Hello Joe.  Attached please find the Waterway SVL56 High-Flow Pump exploded parts diagram for reference.  The  Diffuser O-ringPump Shaft Seal 5/8" - PS-1000, and Gasket, Housing are the seals and gaskets necessary to complete the motor replacement.
 Reply


?     Asked on 3/25/2022by Robert Bromm

What the the individual p/n's of the parts in kit called GOKIT78? I am installing and new motor and want to make sure all of the necessary o-rings are included. The pump previously had a small weeping leak at pump housing close to motor and need to confirm this O-ring is part of the kit? If not, I will order separately.
 Reply

A  Answered on 3/25/2022 by InyoPools Product Specialist Craig C.

Hello Robert.  The following parts are included in the Aladdin GOKIT78 Tune Up Kit for the Pentair SuperFlo/Sat-Rite SuperMax Pumps:   Motor Shaft Seal (354545), Drain Plug o-ring (192115), Pump Lid o-ring (357255), Diffuser o-ring (355030), Seal Plate o-ring (355619), Magic Lube II.  Part numbers indicated are Pentair MFG OEM and do not reflect Aladdin's identification.  Attached please find an exploded parts diagram for the Pentair SuperFlo Pump for reference.  Pentair SuperFlo Pump
 Reply


?     Asked on 3/20/2022by Eric

Hi, I have a Sta-Rite SuperMax VS model 343001. Will this kit (GOKIT78) work ? Thanks.
 Reply

A  Answered on 3/21/2022 by InyoPools Product Specialist Craig C.

Hello Eric.   The Aladdin Tune Up Kit, GOKIT78, is compatible with the Sta-Rite SuperMax VS Model 343001 Pool Pump.  GOKIT78
 Reply


?     Asked on 3/19/2022by Annabel Menchaca

Do these parts fit this pump?

 Reply

A  Answered on 3/21/2022 by InyoPools Product Specialist Craig C.

Hello Annabel.  The Aladdin Tune Up Kit Pentair SuperFlo, GOKIT 78, is compatible with the Pentair Pump Model 340040 - SuperFlo.  Attached please find an exploded parts diagram for the Pentair SuperFlo Pool Pump for reference.  Pentair SuperFlo Pump    Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78
 Reply


?     Asked on 2/25/2022by will hausauer

Hi i have a SF-N2-2A/340044. I need a bearing and seal kit. Please point me at the correct ones

 Reply

A  Answered on 2/25/2022 by InyoPools Product Specialist Craig C.

Hello Will.  The Century Motors Bearing 203, quantity 2 (two), is the correct bearing for the Pentair Motor 177456.  Bearing, 203 (Single)   The GOKIT32 contains the motor shaft seal, seal plate gasket, and diffuser o-ring necessary to complete this project.   GOKIT32
 Reply


?     Asked on 12/7/2021by Pavel Vazquez

Hi, I wolud like to knof if this fits in this Pump? Pentair Superflo High performance punp P/N 340039 PMP SF N1 1 1/2A HP 115 Horsepowers 1.5
 Reply

A  Answered on 12/8/2021 by InyoPools Product Specialist Stephen B.

Thank you for contacting Inyo Pools, Yes this Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 will fit your pump model.
 Reply


?     Asked on 11/10/2021by Richard E. LeBoeuf

Pump is start to make noise SF-N1-1A/340038 looking for correct tune up kit.

 Reply

A  Answered on 11/10/2021 by InyoPools Product Specialist Rich N.

Hi Richard, if you are confident on the cause of why your pump is loud the Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 will be perfect for your Pentair SuperFlo Pump.  Be sure to check out our article on How To Replace a Pool Motor Shaft Seal if you have never done it before for some helpful tips.
 Reply


?     Asked on 8/29/2021by JC

Is this for Pentair SuperFlo High PErformance Pump 350097?
 Reply

A  Answered on 11/4/2021 by InyoPools Product Specialist Joe S.

Good day, yes the Aladdin Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax would be the correct replacement kit.
 Reply


?     Asked on 5/10/2021by Kevin

Motor company is loud. What can I or do I need to do to silence it ?
 Reply

A  Answered on 5/10/2021 by InyoPools Product Specialist Robert M.

The loud sound is likely caused by bad bearings. You can try replacing the motor bearings but it is not the easiest task. We'd recommend replacing the motor. The seal kit, GOKIT78, would not help with the noise but it would help protect new bearings/motor.
 Reply


?     Asked on 5/4/2021by Rene

Need tune up kit for Pentair Superflo pump model # SF N1-11/2A340039
 Reply

A  Answered on 5/4/2021 by InyoPools Product Specialist Robert M.

This is the correct tune-up kit for the Pentair Superflo pump.
 Reply


?     Asked on 1/16/2021by Francis Harrison

i need a quick kit for a whisperflow 2hp model wfe-8
 Reply

A  Answered on 1/18/2021 by InyoPools Product Specialist Hector F.

Hi Francis, the seal kit for your Pentair Whisperflo series pool pump in a chlorine swimming pool is the GOKIT32 and for a saltwater swimming pool it is the GOKIT32SALT
 Reply


?     Asked on 12/26/2020by Jeff Yapp

I need a kit for a Pentair SuperFlo 350097 in a salt water pool.
 Reply

A  Answered on 12/28/2020 by InyoPools Product Specialist Hector F.

Hi Jeff, this is the correct seal kit for the Pentair SuperFlo pool pump series however does not have a saltwater shaft seal part number 5250-210 that will need to be purchased separately. 
 Reply


?     Asked on 10/18/2020by Bruce Bender

What is the part number for a seal kit for a Super Flow VS 342001?
 Reply

A  Answered on 10/18/2020 by InyoPools Product Specialist Patrick P.

Hi Bruce, This GOKIT78 would be the proper seal kit for your Super Flow VS 342001
 Reply


?     Asked on 6/25/2020by Brent Hendrickson

Is this the right kit for the 340040 2hp Pentair Superflo model?
 Reply

A  Answered on 11/10/2020 by InyoPools Product Specialist Hector F.

Hi Mr, Brent, yes this is the correct seal kit for the Pentair Superflo series pool pump. 
 Reply


?     Asked on 6/1/2020by Andrew Forenchak

I need a seal kit for my Pentair Superflopump 1 HP P/N 340038.What is the correct P/N Kit ???? Thank you Andrew
 Reply

A  Answered on 6/1/2020 by InyoPools Product Specialist Hector F.

The GOKIT78 is the correct seal kit for your Pentair Superflo pump. 
 Reply


?     Asked on 5/24/2020by randy

my pentair superflo pump will not prime up, it ran dry for a period of several hrs. The pump is only 1 yr. old, does it need to be rebuilt because it ran dry and got hot?
 Reply

A  Answered on 11/3/2020 by InyoPools Product Specialist Hector F.

Hi Randy, there could be multiple reasons why a pool pump will not prime. Here is a guide that we put together called "How To Determine Why a Pool Pump Won't Prime" that should help.  
 Reply


?     Asked on 5/16/2020by Jimmy Cooley

looking for tune up kit for a Pentair Super Flo pump # 3040039 , which one should I order ?
 Reply

A  Answered on 5/16/2020 by InyoPools Product Specialist Patrick P.

This GOKIT78 will be the correct kit?
 Reply


?     Asked on 5/14/2020by Ken Sherman

Can i get a tune up kit with the saltwater seal
 Reply

A  Answered on 12/7/2020 by InyoPools Product Specialist Hector F.

Hi Ken, unfortunately, we do not carry a saltwater seal kit for the Pentair Superflo but you can get the seal separate being part number 5250-10
 Reply


?     Asked on 5/13/2020by Ken Sherman

can i get this kit with the saltwater seal
 Reply

A  Answered on 1/5/2021 by InyoPools Product Specialist Hector F.

Hi Ken, unfortunately, we do not carry this seal kit in a saltwater version however you can get the saltwater shaft seal seperately. 
 Reply


?     Asked on 5/7/2020by Donna Alsdorf-Nixon

How hard is it to do the gasket and seal replacement for a 340037. Should I have someone else do it
 Reply

A  Answered on 5/7/2020 by InyoPools Product Specialist Patrick P.

Most of our customer tackle this job on there own as it is not too difficult. Here is a Guide on How to Install a Seal Kit which might find helpful.
 Reply


?     Asked on 1/18/2020by KP

I have a Pentair Super Flo (1hp) and need to put on a new motor as the current one has started making a loud whining noise. I believe the new motor should be A.O. Smith 1 HP Square Flange 56Y Up Rate Motor - B2853. If that is correct, Which "tune-up kit" do I need to order with it? As a separate issue can I mount a 1.5 hp motor (and would it be wise) on the current pump housing and if so would it provide more suction at my skimmer and drain? If so, which motor and tune up kit would be best?
 Reply

A  Answered on 1/22/2020 by InyoPools Product Specialist Lennox H.

Hi, KP. This tune up kit is the correct one for your pump. If you want to increase the pump HP to 1.5 you will need the matching motor, impeller and this kit. 
 Reply


?     Asked on 12/14/2019by Jane Montero

Hi, this will fit on Sta Rite Super Max, 3/4 HP Model PHK2RA6D- 101 L ? Thanks
 Reply

A  Answered on 12/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Jane. Yes, this Tune Up Kit - GOKIT78 will work for your model pump. 
 Reply


?     Asked on 11/10/2019by Doug Jones

Is this the right kit for Pentair Superflo 1 1/2 hp part # 348024/
 Reply

A  Answered on 11/11/2019 by InyoPools Product Specialist Lennox H.

Hi, Doug. Yes, this is the correct kit for your model pump. 
 Reply


?     Asked on 7/26/2019by Tom Cafferty

Is this the correct kit for a Pentair SuperFlo 350097 pump?
 Reply

A  Answered on 7/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Tom. Yes, this tune up kit will work with your model pump. 
 Reply


?     Asked on 6/29/2019by William Putnam

Could you please list the parts that are depicted in the photo for your tune up kit This is what I think I need: Item No. Part No. Description 6 355619 SEALPLATE GASKET x 9 355030 DIFFUSER SEAL x 12 192115 0-RING, DRAIN PLUG x 14 357255 0-RING, LID #2-357 x 23 3545455 SEAL SET x 27 6020018 0-RING ADAPTER #2-226, 2 REQ. x (2)

 Reply

A  Answered on 6/30/2019 by InyoPools Product Specialist Megan C.

It will include the one seal plate o-ring, one diffuser o-ring, one shaft seal, two drain plug o-rings, two of the union nut o-rings, and o-ring lubricant. 
 Reply


A  Answered on 6/30/2019 by Industry Professional

THE GOKIT78 INCLUDES THE FOLLOWING PARTS Kit Contents: (2) APCO2395 - F07 LETRO O-RING (1) APCO2300 - 355619 PACFAB O-RING (2) APCO2455 - O-RING 92200100 355330 (1) APCO2223 - 355030 PACFAB O-RING (1) APCAS200 - PUMP SEAL - 354545 PACFAB
 Reply


A  Answered on 7/1/2019 by Industry Professional

1-As 200 pump seal, 1-O-130 drain plug o rig, 1-0-150 pimp lid o ring, 1-0-395 Diffuser o ring,1-0-465 seal plate o ring, lube for o rings
 Reply


A  Answered on 7/1/2019 by Industry Professional

The Go-Kit78 includes the Seal, 2 drain plug orings, 1 Lid oring, 1 Diffuser oring and 1 Seal Plate oring
 Reply


?     Asked on 6/7/2019by Ray

I have pump SF-N1-1-1/2A/340039 running waterfall on salt pool. Is this correct kit. I am replacing motor with PL2854 as mine is getting hot and thermally shutting down in about 20 minutes
 Reply

A  Answered on 6/7/2019 by InyoPools Product Specialist Patrick P.

Hi Ray, This GOKIT78 is the proper seal kit for your SF-N1-1-1/2A 340039 and the PL2854 1.5 Replacement Motor is also correct. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 6/4/2019by Kyle

What are all the parts in the kit. I need to get the parts for use with a saltwater pool. You have already provided the part number for the saltwater heavy duty seal but what are the remaining parts I need to purchase separately?
 Reply

A  Answered on 6/5/2019 by InyoPools Product Specialist Patrick P.

Hi Kyle, After going through all of the parts it would be less expensive to purchase 1 GOKIT78 and 1 Heavy Duty Shaft Seal This would give you an extra standard shaft seal but it is always good to have a backup shaft seal on hand. The standard seal can be used on a salt pool however the heavy duty seal will last much longer on a salt pool.
 Reply


?     Asked on 5/30/2019by dean quinlan

will this kit work on pentair 340038 1hp?

 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Hector F.

Yes, this is the correct seal kit for your model pump.
 Reply


?     Asked on 5/29/2019by Russ Gulley

Is this the correct kit for P/N 348022?
 Reply

A  Answered on 5/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Russ. Yes, this Tune Up Kit - GOKIT78 is compatible with the SuperFlo 3/4 HP EE Single Speed Pump - 348022
 Reply


?     Asked on 5/27/2019by Kin H Eng

Will this work for the Superflo 340041
 Reply

A  Answered on 5/27/2019 by InyoPools Product Specialist Patrick P.

Yes this will work for the Superflo 340041
 Reply


?     Asked on 5/25/2019by KELLY

THE SEAL BETWEEN THE MOTOR AND IMPELLER HOUSING IS LEAKING. WHEN I PULL IT APART TO REPLACE THE O-RING , WILL I NEED OTHER SEALS THAT MAY GET DAMAGE DURING THIS REPAIR. THIS WAY I WILL HAVE TO ORDER THE KIT INSTEAD OF JUST THE ORING THAT I WILL NEED.????
 Reply

A  Answered on 5/25/2019 by InyoPools Product Specialist Patrick P.

Hi Kelly, We would suggest the kit as many times when you take the pump apart old o-rings that were not previously leaking start to leak when you try to re-install them.
 Reply


?     Asked on 5/20/2019by Todd

Will this fit Penair Superflo Model: 177474 with a 1.25 HP motor. Water leak between motor and front housing.
 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Patrick P.

Hi Todd, Yes this will fit your Pentair Superflo
 Reply


?     Asked on 4/18/2019by Cesar

That kit is correct for Pentar SuperFlo SF-N1-1A / 346238 ? I also need the 2 bearings please.
 Reply

A  Answered on 4/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Cesar. This is the correct tune up kit. As for the bearings, we will need the motor number.
 Reply


?     Asked on 3/29/2019by RICHARD W KNIGHT

Just ordered a replacement pump for my Pentair 355022S 1hp Superflow from you Order # 926893 :Pentair Replacement Motor 1 HP Full Rate Single Speed Almo 075234S Kit Pentair SuperFlo/Sta-Rite SuperMax GOKIT78 My questions: 1. is this Tune Up Kit correct for my pump? 2. Do you have the front and rear bearings for this Pentair Pump as I want to replace the bearings? 3. Is the shaft seal in the kit the same as the heavy duty shaft seal (Pump Shaft Seal Heavy Duty (Saltwater Pools) - PS-3867)?
 Reply

A  Answered on 3/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Richard. This is the correct tune up kit for your model pump. As for the bearings, we do not have the correct bearings because it's an OEM motor. The shaft seal in the kit is just a standard seal, not heavy duty.
 Reply


?     Asked on 3/25/2019by JJP

This kit is good for 340036 ? Thanks
 Reply

A  Answered on 3/25/2019 by InyoPools Product Specialist Lennox H.

Hi, JJP. Yes, this Tune Up Kit will work with the SuperFlo - 340036
 Reply


?     Asked on 1/15/2019by DAVID B LEVESQUE

IS this the correct kit for a StaRitePHK2RA6F?
 Reply

A  Answered on 1/15/2019 by InyoPools Product Specialist Lennox H.

Hi, David. Yes, this is the correct kit for you model pump. 
 Reply


?     Asked on 1/8/2019by Andrew Fahey

Ticket # 264298 My impeller screws directly onto shaft. There is no brass threaded piece protruding from the bottom. Therefore the shaft seal spring part is not snug on shaft and seal part is too wide to fit in bottom of impeller.
 Reply

A  Answered on 1/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Andrew. Please reconfirm the pump model or upload a picture of the pump body so that we can confirm which kit you'll need for your pump. The partial pump model number provided will use the Tune Up Kit Sta-Rite Max-E-Pro (Pre February 2015) - GOKIT79 not this Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78.
 Reply


?     Asked on 5/13/2018by Jairo

Will this work with pentair mod 340039 1.5 hp 230/115v o what seal?
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Hector F.

Yes, this is the correct seal kit for your model pump. 
 Reply


?     Asked on 5/8/2018by Inyo Visitor

Will this work with the SF-N1-3/4A / 340037 ?
 Reply

A  Answered on 5/9/2018 by InyoPools Product Specialist Hector F.

Yes, this is the correct seal kit for that pump model. 
 Reply


?     Asked on 7/12/2017by Wayne

Is this kit for a SF-N1-1A/340038? Does it include bearings? Thanks in advance.
 Reply

A  Answered on 7/12/2017 by InyoPools Product Specialist Patrick P.

Yes this is the correct seal kit for your Pentair Super Flo Pump SF-N1-1A 340038. Bearings are not included, if you do need bearings then your motor requires 2 of this 203 Pool Motor Bearing.
 Reply


?     Asked on 7/8/2017by jim hoffman

will go-kit78-9 fit o-ring for Pentair model 340038 (small leak but decided to replace 4 O-rings if this kit can be used
 Reply

A  Answered on 7/9/2017 by InyoPools Product Specialist Hector F.

Yes this is the correct seal kit for your model pump.
 Reply


?     Asked on 6/15/2017by Kevin

Hi, can you confirm this is the proper tune up kit for a pentair superflo N2-1-1/2A/340043? thanks.
 Reply

A  Answered on 6/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Kevin. The Pentair SuperFlo Tune Up Kit - GOKIT78 is the correct kit for model #340043.
 Reply


?     Asked on 3/11/2017by Don

Where is bearing
 Reply

A  Answered on 3/13/2017 by InyoPools Product Specialist Scott W.

The bearings for the motor and the tune up kit that has the orings and gaskets are two different things. If you need help finding the correct bearings for you please provide the part number off your motor.
 Reply


?     Asked on 1/29/2017by Stefanie

Is this kit for salt water pools?
 Reply

A  Answered on 1/30/2017 by InyoPools Product Specialist Alan M.

This model pump does not have a separate Tune-up Kit for salt water pools. You would need to purchase the gaskets and o-rings individually and include the Pump Seal 200, Heavy Duty PS3867 (Saltwater Pools) - PS-3867.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

Pool pump Moyer burned out.

Written on 8/25/2021 by Guest

Reviewed video on inyapools website and followed the instructions. Was easy to understand and all the orings were supplied. There was even a few I didn’t need for my application.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Wrench Set, Adjustable Wrench

1     0

Outside and Inside O-ring Damaged

Written on 4/29/2019 by Guest

Replaced outer o-ring. Old one was stretched out.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Nut Drivers, Socket Set

Replaced Pump

Written on 2/13/2019 by Guest

Took out old pump and replaced it with a new pump and gaskets.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set

2     0

Pump Motor Replacement

Written on 6/22/2018 by Guest

Turn off breaker. Disconnect wiring to pump motor. Unbolt motor from pump. Unbolt diffuser from motor. Unscrew impeller. Replace gaskets. Reverse steps.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.79  out of 5 stars)
19 Rating
5 star:
 
(17)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(0)

The Most Recent Reviews