Part # GOKIT2
Alternate Part #'s 65002, GO KIT 2, PL1002, AEQGOKIT2, APCK1013
Standard tune up kit for the Hayward Super II pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For more Pool Pump Motors
Click here for Saltwater Pool Tune Up Kit (GOKIT2SALT)
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
GO KIT2 65002. IS THIS THE KIT FOR UST 1102 REPLACEMENT MOTOR?
Reply
To determine which Tune Up Kit you require we would need to know the model of your pump. Examples would be the Hayward Super Pump, Hayward Super II, Hayward Max Flo, Jacuzzi Magnum, etc.. Please email us back with this information and we will let you know which Tune Up Kit is right for you.
Reply
I need a tune up kit for a Hayward Super II Pool Pump (2004-2005)
Model #K48N2N104. Which kit do you recommend? 2 HP Pump/230 V.
The kits that I am seeing on your website don't match the model number that is on my Hayward Pump.
Thanks
Ralph
Reply
Hi Ralph you would require the Hayward Super II Tune Up Kit here.
Reply
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, 9/16 box wrench
Very very happy that I was able to replace this old motor but all the print had faded off and I wasn't sure how many HP the pump had made it difficult to order a new one to ensure it would match up with my pump. Ive been trying to figure this out for quite some time. I learned from Inyo Pools that you can take the motor off and look at the impeller PN# and reverse engineer by researching the impeller PN# to see what HP it was designed for. Once I found out the HP I immediately ordered the Century energy efficient model, a "Go Kit" seal kit and new impeller ring and flange. Before I took the motor off the pump I shocked the pool and let it run for several hours, then turned off the 220 circuit breaker and removed the pump, took pictures of the timer wiring with my phone. Worked on breaking down the motor by removing the impeller and old seal and set the motor aside until the new one arrived. Box arrived in very good condition with the other parts inside, everything was in very good condition upon arrival and .... shipping was free! I took the electrical whip off the old motor and wired it to the new motor, took the pump parts off the old motor, cleaned them up, and installed them on the new motor. Inyo pools sent videos from their knowledge base and I watched the videos on how to install the Go-Kit seals, flange and impeller ring, and everything went accordingly and fit perfect. I installed the new Impeller ring and Round Flange per InyoPools video. After the motor was ready, I brought it the pump and installed the new round seal after lubricating it with the lube provided with the Go-Kit. Motor slid right in, bolted up perfect, I then re-attached the wiring whip to the timer, turned the circuit breakers on and the moment of truth was upon me. I flipped the switch to "on" and the pump came to life making very little sound or noise and fired right up! the pump is very quiet and energy efficient and I am very satisfied and proud of replacing the motor and seals myself and saving a lot of $$$. Another perfect DIY job!
More than 8 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set
I asked my pool man for advice when the pump became noisy and he told me I should try to replace the motor. I contacted Inyo Pools to order a replacement-Hayward Super2 plus a GoKit. The parts came in one package after several days. I viewed the tutorials several times to get a handle on the job. I removed the old motor and followed the steps to install the new one with new seals. First try the motor didn’t start, so I double checked to see if I was suffering from operator trouble. After that I initiated a chat with Inyo and set up a Product Support Ticket in order to replace the motor. 24 hours later I decided to dig deeper into the issue only to find a wire issue in the 220 line to the motor. I rewired the line and tried the pump again. Total immediate success!! As a simple homeowner I’m thrilled!
2 to 4 hrs
Obvious tools plus those listed in story
On line instructions were quite detailed. Followed them no problem. Did have a problem unscrewing the impeller though. Fought with it with various tools including vise grips and channel locks. Turned out it had plastic threads molded in and were gone after removal. New impeller had metal threads so an improvement.
Less than 1 hr
Screwdriver, Socket Set
Less than 1 hr
Socket Set, Wrench Set, Adjustable Wrench
2 0
Purchased Tune up kit and then followed the video online. Watched video through twice before tackling the pump. Took my time, followed instructions, and was fairly simple process. Pump one again running smoothly and we have no more leak! Strongly recommend the Inyopools products and online support information.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
1 0
Less than 1 hr
Socket Set, Wrench Set
2 0
I pulled the the pump assembly apart. I figured it would be best to order the pump parts as well as the motor.
The motor and seal/gasket kit came in 3 days. That was unexpected, but was delighted that it came in so soon.
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set, Strap wrench, needle-nose pliers
The Most Helpful Review
2 0
(5 out of 5 stars) everything I needed in one small package- perfect
Reviewed By: Inyo Customer ()
this is everything you need to replace all seals on a Hayward super II pump- the one with the spin off top....... I used this kit to reassemble the pump when I replaced the motor (leaking between pump and motor). This is an all inclusive kit that puts everything you need in one convenient package, everything fit and was very easy to change using the instructions and videos found on this site. only one word of caution because it can't be stated enough: make sure power is off at the breaker before starting.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great! Works well!
Was this review helpful to you?
(5 out of 5 stars) Good kit
Reviewed By: Inyo Customer ()
Complete kit, although ribbon gasket is a bit tight
Was this review helpful to you?
(5 out of 5 stars) Just what I needed
Reviewed By: Inyo Customer ()
Just what I needed. Had all the seals that I needed for my pool pump.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Parts work great.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kevin W. ()
perfect replacement part
Was this review helpful to you?
(5 out of 5 stars) Worked perfect!
Reviewed By: Inyo Customer ()
Worked perfect!
Was this review helpful to you?
(5 out of 5 stars) Works great.
Reviewed By: Inyo Customer ()
Great product. Easy to install.
Was this review helpful to you?