Jandy Zodiac ePump JEP2.0, Gen II Motor with Drive Kit - R0562201

$1,879.74

IN STOCK
FREE SHIPPING

Part # R0562201

By Jandy


Details

Top

Part # R0562201

Alternate Part #'s M48AA66D58, R0474403, 35-295-1262, JDYR0562201

Product Description

Motor w/ Drive, Gen II - R0562201

Features:

  • The ePump ultra-high efficiency motor enables cooler operation and extended motor life.
  • Patented Quiet Technology for reduced noise levels
  • Energy-saving ECM permanent magnet TEFC motor
  • Extra long motor life and quiet operation
  • 600-3450 RPM range

Product Specifications

HP:
2.0 HP
Type:
Variable speed
Commonly Used On:
Jandy ePump JEP Series
Top

?     Asked on 9/7/2021by Glenn Bailey

Is this pump motor available in stock and is it a direct replacement for the Jandy motor part number M488AA66D58 with no other changes required for like replacement other than setting the dip switch address?

 Reply

A  Answered on 10/13/2021 by InyoPools Product Specialist Craig C.

Hello Glenn.  The Jandy Zodiac JEP 2.0 E-Pump Variable Speed Replacement Motor 2.7 HP w/Drive - Gen II is compatible with the Jandy ePump Variable Speed Pump (2008-Present).  Attached please find an exploded parts diagram for the Jandy ePump VS Pump  Jandy ePump Variable Speed Pump (2008-Present)   Jandy/Zodiac was not able to cross-reference the motor part number M48AA66D58 to the ePump.  Please verify your pool pump model.  If it is the ePump, the replacement R0562201 is compatible.  The motor shaft seal and backplate o-ring should be replaced concurrent with the new motor/drive.   Jandy Pump Shaft Seal 5/8"      Backplate O-Ring  
 Reply


?     Asked on 1/30/2021by Mark

What is the warranty on this pump
 Reply

A  Answered on 2/4/2021 by InyoPools Product Specialist Hector F.

Hi Mark, this motor carries an 18-month manufacturer warranty from the date of purchase. 
 Reply


?     Asked on 11/10/2020by Stuart Bontrager

This pump is showing to no longer be available. What is the current replacement model for this pump?
 Reply

A  Answered on 11/11/2020 by InyoPools Product Specialist Joe S.

Hello Stuart, we would recommend the Waterway Power Defender 270 Variable Speed Pool Pump 2.7 HP 230V - PD-VSC270. If you have Jandy Automation you will also need the V-Green Automation Adapter Kit - 2517501-001.
 Reply


?     Asked on 1/3/2020by Tom Roberts

Does this motor Century M48AA66D58 R0562201 have a capacitor? Is it within the control box controller attached to the motor? If so, can this be replaced? My motor, will not start and immediately causes the breaker to break before starting, making me believe there is an electrical short somewhere or the capacitor has blown. Note this is a Jandy Pro Series E-Pump assembly - variable speed 2 HP X 1.35 = 2.7 HP
 Reply

A  Answered on 1/7/2020 by InyoPools Product Specialist Matt S.

Unfortunately, Jandy does not provide schematics for their variable-speed motors, so we cannot verify there unit contains a capacitor. For in-depth troubleshooting and to begin any possible warranty work, I suggest giving Jandy a call at 800-822-7933
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)