PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Pentair Pool Products


Details

Top

Part # 011579

Warranty 1 Year (See Pentair Warranty Card)

Manufacturer Code WF-3

Alternate Part #'s PEN011579, PUR-10-374

Product Description

Inyo Recommended Pumps

Pentair WHISPERFLO incorporates innovative hydraulic engineering to move water more efficiently and quietly than competitive pumps. Under typical operating conditions, Pentair WHISPERFLO offers the greatest water flow of any high performance pump—yet with the lowest electrical consumption. To circulate more water in less time and at the lowest cost, choose quiet, reliable, Pentair WHISPERFLO.

Commonly Replaced Parts (Click on Link to view/purchase):

 Additional features include:

  • Lower operating costs. Less horsepower required to produce needed water flow, even when used in pool/spa combinations and when operating in-floor cleaning systems.
  • Extremely quiet operation documented in rigorous ETL tests.
  • Patented oversized strainer basket reduces cleaning frequency.
  • 1 Year Warranty
  • High-efficiency impeller maximizes water flow.
  • Life-extending diffuser wear-ring prevents uneven impeller wear.
  • Thicker seal plate withstands loss of prime conditions.
  • Available in standard and energy-efficient models.

Click here for more Pentair Pumps

Pentair Whisperflo DimensionsPentair Whisperflo Pump Curve
Click here for more Pentair Pumps

Product Specifications

HP:
3/4 HP
Speed:
Single
Volts:
115/230V
Amps:
13.2/6.2-6.6
Port Size:
2 in.
Service Factor:
1.65
Top

?     Asked on 2/16/2012by Guest

I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
 Reply

A  Answered on 2/16/2012 by InyoPools Product Specialist Patrick P.

Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
 Reply


?     Asked on 5/11/2020by joel scenkel

How many gallons per minute will tjis pump virtualy no rise 1 1/2 pipe
 Reply

A  Answered on 12/7/2020 by InyoPools Product Specialist Hector F.

Hi Joel, there are a few variables to consider when calculating gallons per minute. Here is a guide that we put together called "How To Read a Pool Pump Curve" that should assist with that. 
 Reply


Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews