Part # 263034
Manufacturer Code 263064
Alternate Part #'s 263064, 25831-119-750
NOTE: Currently shipping in Black
After Market 2" Slide Valve by CMP for Pentair DE and Sand Filter replaces 263064
MULTIPORT Backwash Valves for D.E. and High-Rate Sand Filters - PLEASE NOTE: model #263034 has been replaced with model #263064. These 1 1/2 inch Side Mount MULTIPORT Valves, available in threaded or socket ports, are rated at 100 GPM to accommodate most installations. The 2 inch side-mount MPV is rated at 125 GPM. Top mount valves are available in 1 1/2 inch 8-position or 2 inch 6-position. All MULTIPORT valves are constructed of molded ABS material with heavy-duty plastic handles and are 100% factory tested. Additional features include: 100 GPM (1 1/2 inch side mount) 125 GPM (2 inch side mount) 8-position (1 1/2 inch top mount) Durable lever action handle for simple operation Water-resistant rotor for long life Threaded or socket ports to fit variety of D.E. or sand filters Sight glass included 100% factory tested One-year Warranty Performance Data and Valve Positions: * The following valves are used with Pentair DE filters Model No. Model Pipe Size Filter Type Filter Back Wash Waste Recirculate Rinse Closed 261177 Multi Port Valve 1.5" FIP DE 261152 Multi Port Valve 2" FIP DE 261165 Slide 2" Slip DE or Sand - - - - 263034 Slide 2" Slip DE or Sand - - - - * Valve 263034 fittings set to 7.5" center to center
Will this part #263064 work with my Pac Fab Nautilus NS-36 DE Filter
Reply
Hello Tom. Attached please find the Pentair Nautilus FNS D.E. exploded parts diagram. The 2" Slide Valve for Pentair DE and Sand Filter - Black - 263064 is compatible with the Pentair/ Pac Fab Nautilus FNS-36 DE Filter.
Reply
What is the short clear section of pipe shown that is included in this valve for and where does it install?
Reply
Hello Mark. The clear section of pipe is a sight glass that may be plumbed into the backwash line if desired. The purpose of the sight glass is to visually monitor the clarity of the backwash water. When the discharge water runs clear the backwash process is complete.
Reply
Will this work on a Triton II TR-60?
Reply
Thank you for contacting Inyo Pools, According to the parts diagram it will work Pentair Triton II Fiberglass Sand Filter
Reply
i have an old American DE filter see picture attached... the nut to attach the backflush valve to the filter has split and is leaking at the fitting..
first do they make a split nut for this ... it is an odd size.... i would rather go this route as i dont have to replumb
second is the 2" backflush vale 263064 the correct replacement valve for this unit..?
if it does not work is the part returnable ?
thanks
Kevin
Hi Kevin, Thanks for the photo! No, the split nut is not sold separately. Yes, this valve is the correct replacement valve for your filter in the photo. If it does not fit then yes it is returnable, just as long as it is in like-new resellable condtion. You would just be responsible for any return shipping.
Reply
I'm starting to get some filter sand in the pool, Could the problem be worn out O-rings in the slide, or do I have to look for a more involved solution?
Reply
Hi Keith, The most common issue for sand back in the pool is broken laterals. Could you post a few photos of your sand filter, especially the label on the tank showing the filter model information. Simply click the reply link below to upload your photos. Also here is an article on Why am I getting Sand Back in My Pool which you might find helpful.
Reply
Will this part (2" Slide Valve for Pentair DE and Sand Filter - Black - 263064) fit my Nautilus NS-36 DE Pool Filter
Reply
Yes, this Slide Valve will fit on your Pentair Nautilus NS36 DE Pool Filter.
Reply
Will this fit my purex triton fns plus P/N 190029 ? My old valve cracked due to weather conditions and it seems the parts have been discontinued.
Hello Patt, we show two options as slide valve replacements for your model Pentair FNS Plus filter series being 4610-0 and 25831-119-750.
Reply
Where online can I find the manual that comes with the 263064 slide valve?
Reply
Hello, Unfortunately, we would not have the manual. We recommend checking the manufacturer's website for that information (pentair.com)
Reply
The push pull valve is leaking around the top of the valve stem just under the cap. How do I get replacement O-rings to fix this
Reply
I have a Pentair FNS Plus 60 180009 DE filter. I am replacing the entire valve due to cracks in the old one. I cut out the old valve, I am installing unions, there are no part numbers. The piston part number is 27-3241. I am pretty sure this is the right part, just wanted a second opinion before I order it. Thank you for your help.
Reply
Hello,This will be the correct part.
Reply
Is this the correct valve for a pentair 180009 fans plus 60 DE filter.
Reply
Hello, This will be the correct valve you will need. http://www.inyopools.com/Products/07501352028156.htm
Reply
Is this the correct valve for a pentair 180009 fans plus 60 DE filter.
Reply
Hello, This will be the correct valve you will need for your new filter. http://www.inyopools.com/Products/07501352028156.htm
Reply
I have a Pentair triton11 TR-100C side mounted slide valve that has to be replaced...what do I need to order??
ron
Reply
Hi, Ron. For a list of replacement valve, see that Pentair Triton C Filters product page.
Reply
I only need the valve not the plumbing. is that available?
Reply
Hi, The valve is not sold without the plumbing connections. You can view available parts via the Pentair Push Pull Valves parts page.
Reply
bought the Pentair quad 60 and the backwsh valve Pentair 263064 FNS Plus Quad D.E. Filter PVC Push Pull Valve; the directions said top - waste, middle ' from the pump' and bottom to the pool - disaster- plunger up as directed- water did not filter but went to waste and when we put the plunger down the filter reversed and blew out the D.E. and now the quad cartridges are full of green algae debris - give me a heads up on how to plumb the valve and how to clean the cartridges- pls.
Reply
Hi Paul, The DE application the Top Port is the return line and the waste port is the bottom.
Reply
does this push valve fit a Pentair 188592 QUAD 60 SWIMMING POOL FILTER D.E. / CART 120GPM ?
Reply
Hi Paul, The 2" Slide Valve for DE and Sand Filter (263034) can be used on the Pentair Quad 60 D.E. Filter (188592).
Reply
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
$1,219.00
$1,309.00