Part # P6E6D205L
Alternate Part #'s PENP6E6D-205L, STA-10-301
MAX-E-PRO PUMPS By Sta-Rite
SUPERIOR HYDRAULIC DESIGN MOVES MORE WATER, RESULTING IN LOWER ELECTRICAL COSTS
This new high efficiency, low maintenance pump is designed for maximum performance for the modern pool. Advanced state-of-the-art hydraulics means that Max-E-Pro delivers more water resulting in lower electrical costs. It will keep your pool crystal clear as well as run your automatic cleaner and any other hydraulic accessories around your pool. Not only is this pump energy efficient, it is ultra quiet. Special dampening in and around the pump’s base makes Max-E-Pro one of the quietest pumps in its class.
The extra large 6” trap collects more debris, allowing you to clean the trap less often. Our clear see-thru lid allows you to check for debris without removing the lid. The new Quick-Lock trap cover ring makes loosening or tightening the trap a cinch. Max-E-Pro is self-priming and produces enough suction to lift water 5-feet above pool level. Large 2” ports include external and internal threads to adapt to a variety of pipe sizes. PLEASE NOTE: Unions not included.
The Max-E-Pro is built to last, constructed of Sta-Rite’s glass reinforced resin that is corrosion-proof and can withstand many years of U.V. sunlight. This season, invest in the energy efficient, low-maintenance pump that really moves the water – Max-E-Pro by Sta-Rite. 110/230V UL Listed and NSF. Backed by a 1-Year Warranty.
Click here for more Sta-Rite Pumps
Can I order just replacement parts for this pump? I need the skimmer basket lid and basket
Gene-Yes, you can get just parts for the Sta-Rite Max-E-Pro 3/4 HP Full Rate Energy Efficient P6E6D205L. The parts you need are Strainer Pump Basket (c8-58p) 5055-19 and Trap Cover Assy (17307-0111s) 5057-33.
Strainer basket cover is on wrong and can't get it off
There is one way to remove the lid ring and that is to unscrew it. Unfortunately, we do not have any secret ways to remove a stuck lid. You can try placing a 2x4 against the edge of the lid and lightly tapping it with a hammer.
I am replacing a Sta-Rite pool pump. The pump motor is .75 HP with 220 power.. I have a 21k gallon pool with System 3 S7M120 pool filter. I'm finding .75 HP pumps harder to find than 1 HP pumps, although you have both. Should I stick to the .75 HP pump or would moving up to a 1 HP pump be ok? Will it result in less work on pump? Or might it put pressure on my filters. Also, how long might delivery be to the 95608 zip code?
Hi, William. I would recommend staying with a 3/4 hp rated pump. Increasing the hp on the pump will not allow it to work less, it will just move more water overpowering the filter if it can not handle the water flow. It would take 5-7 business day for ground delivery.
researching a replacement for a p6e6d-205l, noticed you also carry a p6ra6e-205l at a lower cost. Any advantage to upgrading to this pump and would it be a direct replacement?
Hi, Dennis. The Sta-Rite Max-E-Pro P6E6D-205L is a better pump than the Sta-Rite Max-E-Pro - P6RA6E-205L. It has a higher service factor which will allow it to operate as a 1 hp pump using less energy. Yes, it will also be drop-in replacement.
Is this a good replacement for a pentair Ultra Flow 3/4hp 38448200?
Max-E-Pro 3/4 HP Full Rate Energy Efficient - P6E6D205L
(5 out of 5 stars) Easy pump to install
Reviewed By: Timothy H. from Citrus Heights, CA ()
Pros: Easy installation
Cons: change in union on body required modification of existing plumbing
This light weight and compact pump was extreemly easy to install considering the limited and confined space it needed to fit into. Electrical hook-up was a breeze with only three wires to bother with. The pump is easy to breack down into its two components to lube o rings or to clean. The pump runs quiet with very little to no vibration.