Does this kit include the impeller and diffuser?
Reply
No, this kit does not the impeller or diffuser, it does include the pump housing, lid, basket, shaft seal and seal plate.
Reply
will this volute work with pentair whisper flow #011514?
What other parts do you recommend replacing when making repair? Please specify part #s.
thanks.
Reply
Yes this volute kit will work with the Pentair Whisperflo.
Reply
I have cracks in the volute. I may as well rebuild the whole pum. What else do I need in addition to this Volute Replacement Kit?
Reply
Hi Don, You will need the Impeller, Diffuser and Diffuser Hardware base off of the motor you have.
Reply
I have a Pentair Superflow 1hp pump. Cold weather cracked both the seal lid as well as the seal lid base causing a loss of vacuum. Motor is fine. Can you recommend the replacement part, volute, basket seal lid?
Reply
Will it work for a whisperflow 2.5 hp Model # 011775
Reply
Hello Don- The Volute Replacement Kit (357149) part # 5074-10B is the correct replacement for your Whisperflo Pump 2 1/2 HP - WF-30 011775.
Reply
I just lost the motor off my Pentair Whisper Flo pump....what I'm looking at is either replacing the motor (bolting it on the old pump) or replacing the motor and pump entirely. I have around 15 years on the pump and motor (before the motor went out) and my question is does the pump piece (the Volute and all it's parts) wear out over time and need replacing periodically even if it's not broken?
Reply
John, Typically the pump housing does not go bad over time. The main items that need to be replaced over time are the motor, shaft seal and o-rings/gaskets.
Reply
I have a crack in my volute, the pool is 30 years old, it's a purex triton whisperflo model WF-28, will part number 5074-10B work as a replacement?
Thanks
Reply
Yes this volute kit will work for your pump.
Reply
what type of fitting goes on the suction side of the pump? What type of threads?
Reply
Hello Peter- The specific unions for that whisperflo are the Union, 11201-0154 (WhisperFlo Pump - SOLD INDIVIDUALLY).
Reply
will this fit my Whisperflo WF 23 3/4 hp the housing where the motor bolts onto has deteriorated on the bottom
Reply
Hi, Steve. This Volute Replacement Kit - 357149 will fit the WF-23 pump.
Reply
Does the replacement kit come with the diffuser (5074-13A) and the gasket seal (5074-09B)?
Would you please list all the parts in the Volute Replacement Kit.
Thank you.
Reply
This volute kit includes the pump housing, lid, basket, shaft seal and seal plate.
Reply
I have WFDS-3, Serial #1-12-F03, Does this Volute kit replace the entire pump
with the exception of the electric motor? If not, what would I need to purchase in
order to replace the entire (Non electric motor) of this pump.?
Reply
I just replace my pump motor, it's working fine now. But the next 2 days, I see water sitting under the WhisperFlo Volute (housing), Could it be a leak from coming from the bottom of the housing? does the volute gets bad overtime?, I have 19 years on it already, Is it time to replace?
Reply
Hi, Rey. The leak could be from a bad shaft seal, Bad Housing Gasket or a warp pump body. Since the pump is that old, it would not hurt to replace it.
Reply
This is all that remains of the pool pump name can you help
Reply
Hi Robert, this volute is used on the Pentair Whisperflo series pool pump and in some Pentair Intelliflo models as well.
Reply
Need to replace Wisper made by pentair WFE-3.
3/4
Service factor 1.67
Will this volute work on the motor B2661 Century..or can I purchase the whole motor and volute
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Whisperflo and Intelliflo Volute and Seal Plate Replacement Kit - 357149")
Good afternoon David, thank you for choosing inyo pools Yes the volute kit will replace that unit. If you are looking for the complete pump and motor assembly we have that here Pentair Whisperflo Energy Effic 3/4 HP Full Rate Pump - WFE-3.
Reply
Will this replacement kit replace a old 2HP Pentair Whisperflo WFE-8. I believe the Pentair housing part number is 350015. Thanks!
Reply
Hi Gil, yes this is the correct volute replacement kit for the Pentair Whisperflo WFE series pool pumps.
Reply
Does this kit come with the basket that goes inside of the Volute?
Reply
Hi Jose, unfortunately no but it includes the pump housing, lid, basket, shaft seal, and seal plate.
Reply
my pool pipes got frozen during the recent winter storm. Now the Volute has an apparent crack and need to be replaced. Will this fit my motor?
If the motor also went bad, what else do I need to replace?
Thank you!
-0df89fcc-2822-47c5-a186-4b7a08b32f95.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-0df89fcc-2822-47c5-a186-4b7a08b32f95.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Whisperflo and Intelliflo Volute and Seal Plate Replacement Kit - 357149")
Hi Wen, Could you send us a few photos of your motor? Please take a close up shot of the motor label. To supply photos simply click the reply link below and upload your photos or quickest using our live online chat feature. Once we get those photos we can make the proper motor recommendation and this volute is the correct one for your model pump.
Reply
I am looking for a replacement volute for a Pentair Whisperflo. It seems no one has them. Will they ever be available?
Reply
Hello Phillip. The Volute Replacement Kit - 357149 is currently out of stock with no definite date of availability. If you are looking for the volute only - part #350015, almond, it is available through other avenues, just not available from INYO pools at this time.
Reply
