Can this pump be computer controlled?
Reply
If you are referring to automation yes, most 3rd party controllers will be able to run this unit. Others will only be able to turn on and off the unit. Please email us at support@inyopools.com the automation system and we can check compatibility.
Reply
Is the Pureline Prime Variable Speed Pool Pump 1.65 HP a direct replacement for my existing Hayward Super Pump Model SP3010X15AZ?
Also, cant the controller on the Pureline Variable Speed Pump be remotely located?
Reply
The PureLine Prime would not be a direct replacement to the Super II as the plumbing ports are in a slight different location meaning you might have some minor re-plumbing. The controller on this variable speed pump cannot be mounted remotely, it is affixed directly to the motor. This pump would be a great option as a replacement for the Hayward Super II.
Reply
Is this energy star qualified pump?
Reply
This is not Energy Star Qualified I would suggest the Speck EcoMV Variable Speed Pump which is Energy Star Rated.
Reply
what size pump for inground rectangular 8000 gal
Reply
Hi, Our How To: Size a Pool Pump guide has all the info needed to determine what size pump you will need.
Reply
In the future will I be able to buy replacement parts
Reply
Hi Steve, Yes the parts to the PureLine Prime are readily available and you may view or purchase any of the PureLine Prime Pool Pump Replacement Parts here.
Reply
i have a p2ra5f-182L is this a good replacement for it?
it has a timer to control it if I get this pump should I bypass the timer?
Reply
Yes, the PL2605 would be a great replacement pump for your current Dura Glas.
Reply
Will the prueline VS pump work with the Hayward PL-P4 prologic controller? I didn't see any documentation for the Pump install or user manual can I get a copied emailed to me? I like to read through before purchase.
Reply
Yes, the Prime is compatible with the Prologic system. Here's the owner's manual for the Century variable speed motor that is attached to the Prime pump housing.
Reply
What pump would your recommend to replace the Hayward SP3400VSP?
Reply
Hi Karen, I would suggest the PureLine Prime 2.7 HP PL2606 as a great replacement for the Hayward SP3400VSP. The PL2606 has the same 2.7 HP motor as your Hayward SP3400VSP pump but at much more attractive price.
Reply
I have a Hayward SP3400VSP pump & may need to be replaced. I saw your answer to previous question & you recommended a Pureline Prime pump PL2606 (2.7HP), what is the cost of this PL2606 pump? Thanks.
Reply
Hi William, Currently the Price on the 2.7 HP PL2606 is $799
Reply
I need to change the factory default priming speed.
The manual doesn't seem to mention how to do this, it just mentions the factory default priming speed is 2600 RPM for 3 minutes.
How do I change the priming period duration and speed?
Reply
Hi, Rick. You're unable to change the PRIMING speed of the 1.65 VS pump without the V-Green 270 User Interface - 2520652-001 which will provide additional features to the pump.
Reply
The plumbing on my unground pool is with 1 1/2 inch piping. Can I install a pump which has 2 inch ports?
Reply
Hi, Patrick. Yes, you can. You'll just have to use an adapter to go from 1-1/2" to 2" feeding into the pump.
Reply
I have a Pinnacle 1hp pump, that has a failing pump housing and will need to be replaced. What Variable Speed pump size should I select? We have about 36,000 gallon in-ground pool? We use the pump to drive a polaris pool cleaner as well. Thanks
Reply
The PL2605 would be a great replacement for your Pinnacle.
Reply
Is the PureLine Prime Variable Speed Pool Pump 1.65 HP - PL2605 an energy certified Energy Star pump as described below?
To meet the Energy Star specification, the pool pump must have an Energy Factor (EF) – a measure of efficiency – of 3.8 or greater. At this time, all variable-speed pool pumps do meet the minimum Energy Factor rating of 3.8 and qualify for Duke Energy’s rebate.
Reply
Unfortunately, it is not an Certified Energy Star pump.
Reply
I have a Hayward Super Pump. Do you sell a variable speed motor (motor and controller only) as a replacement to that pump?
Reply
Hello, Yes we do have variable speed motors for the Super Pump. What HP pump are you replacing?
Reply
hi not sure how many gallons of water I have but pool is 16 x 32 with a 9' deep end hopper style pool.
Electric pump that came with pool was a 3/4hp hayward superpump about 15 years ago with a cartridge filter.
Have upgraded to 3600 de hayward and would like to change pump. I run pump 24/7 in summer because I am not available to maintain pool so
often so this option has worked for me but at a high expense. Was thinking of installing the pl2615 . what are your thoughts on this..
Reply
I think the PL2605 would be a great option for you, especially if you are running the pump 24/7 as you can run the pump at lower speeds for longer periods of time saving your on your operational costs. You may also want to install a Pool Timer which would allow you to schedule the pump to come on and off at certain time of the day allowing you to run for say 12 hours and not 24 hours.
Reply
I have a "Blue " 1hp pump and would like to replace with one of your vs pumps. Which one would you recommend?
Reply
Hi Tom, This PL2605 PureLine Prime Variable Speed Pump 1.65 HP would be the pump we would suggest as a variable speed replacement for your Blue 1 HP pump.
Reply
i'm looking at replacing my Sta Rite Dura glas with PureLine Prime Variable Speed Pool Pump 1.65 HP - PL2605 but my plumbing is only 1.5 inch Help
Reply
Hi Mark, you could use a standard 1.5" x 2" pvc adapter that you can pick up at a local hardware store for a few dollars.
Reply
can you recommend an adapter to transfer 2 inch ports to 1.5 inch?
Reply
Travis you would require two of this 2" x 1.5" Reducer Bushing.
Reply
Hello, I have a hayward Ecostar variable speed pump, sp3400vsp. Will this pump replace that? Is it compatible with the hayward goldline automation system? Thanks
Reply
Hello, Yes this is perfectly fine to replace and is compatible with Goldline system, but with Ecostar it is 3hp capacity which is more Variable/energy efficient in savings.
Reply
I currently have a 10 year old pentair 2hp superflo pool pump. Would this 1.65 HP be an acceptable replacement?
Reply
If I install this pump myself, does it void the warranty like other brands? I'm looking to replace a 1.5 HP flotec, that doesn't have enough power to operate the main drain and both skimmers. It's also about 15 years old and beyond retirement... I would prefer something variable speed and programmable. I can't decide between the 1.95 Andy the 2.7hp...
Reply
Hi Michael, No if you install the PureLine on your own, then the warranty is not voided. I like the 2.7 HP Variable Speed PureLine Prime as it gives that extra HP just in case you need it. You still have the lower HP range that you can use for everyday filtration and this will really cut down on your operational cost.
Reply
If this pump is hooked to a timer, will custom settings be lost every time it shuts down?
Reply
I wired ours direct and turn it on/off with the breaker. It is wired with saltwater system. It seems to do a pretty good job remembering the previous setting every time I turn it on. I only use the preset (1-2-3) or "Override" setting which is max speed, but on Override you can customize the speed. It usually remembers the preset but sometimes I have to hit the Start button. I love this pump. It was a direct fit for the old Hayward I replaced this year and was easy to install. It is quiet and does a great job pushing water. I do have to keep it on Override or setting 1 to push enough pressure for the heater to work.
Reply
I have a 20x40 unground 38000 gallon pool currently with a sp2607x10 assembly. I do not know how to tell whether it is 115 or 230. I think I need to replace due to not holding a prime, we added a water feature wall, and the motor is extremely noisy. I am interested in the pure line motors, and I am interested in dual speed or variable speed with a timer. Can you help me determine what I should come back with? Thank You
Reply
Hi Peggy, Thanks for the question! Based on all the info. you supplied I would suggest the PurelIne Prime PL2606 2.7 HP Variable Speed Pump The nice thing about the PL2606 is that you have the ability to ramp the pump all the way up to 2.7 HP if you need to for things like vacuuming, spa jets, water features, solar, etc... but for the vast majority of the time you will have the pump dialed down to a very low HP for general pool filtration and this is where you will see all of your energy savings. Typically you can see a savings of 50% - 75% operational cost savings over a single speed pump. I hope this helps!
Reply
Hello my current pump is a 1.5HP Pentair Challenger high performance pump. What would the recommended variable speed pump be?
Reply
Hi Mika, the Pureline Prime PL605 1.65 HP Variable Speed pump would be a great replacement for your 1.5 HP Challenger Pump
Reply
I have a 15,000 gallon in-ground pool. Right now using a 1.5 HP Hayward Superpump without a timer that I let run 24/7. I have no idea what that is costing me in electricity. Should I consider a variable speed pump and add a timer?
Reply
Dennis, A variable speed would run almost constantly on a lower rpm without the need for a timer. You would control the rpms using the drive that is on top of the motor. A timer would only turn the pump on and off.
Reply
Hello, I have a 26k gallon pool with a Salt Generator. We purchased this home a few months ago and the other owners said that they had issues with algae, I have not had issues but I always let the pump run. They installed a Pentair Superflow right before we moved in. Now, the pump is not priming, is doesn't sound like it is trying to prime either. I can hear the motor running but it does not sound right. Should I try to repair it? Or should I just purchase a new pump?
Reply
Hello Mary, there are several different reasons why the pump wouldn't prime, here are some videos to help troubleshoot: How To Determine Why a Pool Pump Won't Prime, How To Prime a Pool Pump, 8 Answers to “Why Is My Pool Pump Not Working?” If you are still having an issue please contact us 407-834-2200.
Reply
I have a single speed 1 hp pump 3450 rpm 1.3 SF. 15A breaker. 220 V. 15000 gals inground pool n spa. 2 questions. How diffcult to custom program settings if I need too. Can you walk me thru it over the phone support. 2. Is current draw while running linear. 50% 5A 75% 7.5 A 100 % 10 A for example. Thx. Mike
Reply
Here is a link to a video on how to program your motor: How To Manually Program A VGreen 165 From Its Pad
Reply
What pump would you recommend to replace a century centurion pump cat-B2854 1.5 hp?
Reply
Hi Kittie, The PureLine Prime Variable Speed Pump would be an awesome replacement for a pump that is using a B2854 motor. We recently put together this Video on the Benefits of the PL2605 Variable Speed Pump
Reply
What is the standard warranty on your products. I am going to be replacing pump, filter and heater for my 20,000 gallon in ground pool. Am also considering going salt water.
Thank you,
Reply
Would this pump work well on a 30,000 gallon above ground pool running a Speck Aquaswim Triple500 cartridge filter?
Reply
Hi Scott, As long as you have 230V electrical service available and you plumb the pool with hard pvc plumbing then this would be a great choice in pumps for you.
Reply
We just installed this pump and we are trying to figure out how to calculate the most efficient schedule for our 32k inground pool. What's a resource to help with this?
Reply
I have a 30000 gallon in ground pool with an old, 1996 model, hayward pump. Would this work in its place?
Reply
Hi, Eddie. In order to confirm I will need the model of your existing Hayward pump or the TDH or Feet of Head for your pool.
Reply
I currently have a Hayward Super pump, SP2607X10, will the pure line work for me? What is the warranty? 13,000 gal inground fiberglass pool. What is the warranty
Reply
Hello, Lori. The PL2605 will work for you based off of your current pump. However, I would not recommend running it at higher RPMs for extended periods of times due to the fact that it has a stronger HP than your current pump, which can damage your system. The warranty on this unit is 18 months for the motor and 12 months for the pump housing.
Reply
I'm replacing my 15 year old Sta-Rite Dyna Wave 2hp pump. Pool is 21000 gal, 2 skimmers, main drain, 3 returns. Runs are up to 60 feet. I have a large Sta-rite cartridge filter. I run it 12 hour a day on a timer with a fireman switch for the heater. I also use a chlorine generator. Pool runs from June through Sept. Is this a good fit?
Reply
Hi George, Based on the pool you described this pump will be a great fit. This pump will save you a ton on your power bill as you can dial it into any RPM speed between 600 - 3450 RPM's this also gives you a lot of flexibility with programming the pump for optimal efficiency.
Reply
Hi I have a richardson industries self priming pump (old) with a richardson motor. Serial number c48k2n143 and pump 310zx10. Its a 1 hp pump I want to replace everything as the motor doesn't work. Please let me know if this will work or any choices I could have. Its an in ground pool. thanks
Reply
Hi Bryan, Yes the PureLine Prime Variable Speed would work as a replacement for your pump and would be the pump we would suggest for you. You may have a little bit of re-plumbing as the plumbing ports on the pump are not in the exact same spot as your Richardson Pump but it should not be too bad.
Reply
I have a 1.5 hp pentair whisper flo and want to buy a pure line. Which one can I get does it matter if I get 1.5 or 2 in pipe if I use reducer
Reply
Hi Tony, My suggestion would be this PureLine Prime 1.65 HP Variable Speed Pump. I really like this pump as it will save you a ton on your operational costs. The variable speed pumps also give you a lot of flexibility as they allow you run the pump from any RPM level between 600 - 3450 unlike single speed pumps where they run a the max RPM's of 3450 whenever they are turned on. This pump has 2" ports like your current whisperflow pump so you should be all set with your plumbing, however if you do need to use a reducer that is fine and would not be a problem.
Reply
I need to replace a Hayward Northstar 1.5 hp pump and would like to replace with a variable speed with a timer. would this pump be a good choice?
Reply
We will need to know if your motor is full rated or an uprated model. That will affect the best variable speed pump we'd recommend. You can call in with that service factor specification that should be listed on your motor label or even your motor model, part or catalog number so we can confirm. You can also email that information in if you would like to upload@inyopools.com.
Reply
I currently have a Jacuzzi Magnum force 1.5HP Single speed, model 94027115. The unit still runs fine but I am researching options to reduce the energy requirements. I was reading that a variable speed unit would accomplish this. Do you have a recommendation? This is an inground 10,000 gallon sport pool with a Jacuzzi sand filter with a max working pressure of 50 psi. There is also a Trane heat pump in line with the system. Thank you. Phil
Reply
Hi Phil, This will be an awesome pump for the set up you explained. The Prime has 2" plumbing like your Jacuzzi Magnum, the plumbing ports are not in the exact same spot but they are close, meaning you will just have some minor re-plumbing. You are correct you will see big energy savings by going with a variable speed pump. With a variable speed pump you will have a full range of HP you can dial the pump into anywhere from .5 HP to 1.65 HP so for the majority of the time you will try to run the HP as low as possible to save on energy but you always have the ability to ramp up the HP as needed for things like vacuuming.
Reply
Need troubleshooting help. Recently, purchased PureLine VS 1.65HP to replace A.O.Smith USQ1102 single speed motor. The pump does not appear to turn on. The voltage was upgraded from 120v to 240v. Terminal 1 and 2 both show 120v going to each connector, yet there are no lights on the pump. Any advice to get this thing working would be greatly appreciated.
Reply
Hi, Phebe. I would recommend checking the positions of the Dip Switches. All Dip switches should be in the OFF position when external controllers are not being used.
Reply
I have a 14,000 gal inground pool with a 1.5 hp pump. i have solar panels on the roof of my single story home. will this pump work at lower speeds with my panels?
Reply
Hi, Andy. Unfortunately, this pump may not provide sufficient water flow at a lower speed through your solar panels.
Reply
Hi there, my existing motor shows a Service Factor of 1.1 - I see that this combo shows SF 1.0 - am I ok to use this still? I currently have a Centurion motor (168453) that is going bad (bearings) and a Challenger pump of unknown age (6+). I know I already asked this, but wanted to clarify since I saw the SF variance - will this setup work for me? Also, this mentions a drop-in fit for a Hayward Super pump, but will it need much re-plumbing to match up with my Challenger?
Reply
Hi David, Yes the PL2605 will have a comparable Gallons Per Minute (GPM) Output as your Challenger and this would be the pump we would suggest as a Variable Speed Replacement for the pump you described. You will have a little bit of re-plumbing as the ports on the PureLine Prime are not in the exact same spot as the Challenger but it should not be too bad.
Reply
I Have a sta-Rite 1/2hp pump running a 20,000 gal in ground pool with attached elevated spa(no jets), pressure side cleaner/booster and heater.
would this pump work for this pool?
Thanks
Reply
Hi Pablo, Yes this pump would work as a great replacement for your current Sta-Rite pump on the pool set up you described.
Reply
I have a PureLine Prime Variable Speed Pool Pump 1.65 HP - PL2605. I purchased it about a year ago from yall. The motor is working fine but the pump would no longer prime. Flow rate fell from 90 gpm to 50 gpm and then ceased pumping all together. The pressures are with clean diatomaceous earth filters. What parts do I need to rebuild the pump?
Reply
Hello Kevin- Typically priming issues are caused by suction leaks in your plumbing or a bad o-ring on your pump lid or diverter valves. Below is a link to a step by step guide on what to look for:http://www.inyopools.com/HowToPage/how_to_determine_why_a_pool_pump_won_t_prime.aspx
Reply
Can I use this pump with a Hayward PL-Plus automation system? Is the RS-485 interface compatible?
Reply
Hi, Don. You can use the RS-485, but will have very limited features. I would recommend getting the V-Green Automation Adapter Kit - 2517501-001.
Reply
Hi, can the control panel on the motor be turned. I just bought one of these and it is on the way. However I do not see in the instruction on whether the contorl can be turned or relocated in some way. In my current set up I am not sure how well I will be able to operate the control.
Reply
Hi, Rod. The interface on this pump cannot be rotated. You can purchase the Century VLink - VL100 or the V-Green 270 User Interface - 2520652-001 for off-board controls.
Reply
I presently have a single speed 2 hp AO smith pump on a Waterway Mustang basket, about 12 yrs old.. The pool is 18000 gal. I have a slide- would this have enough power and be appropriate for my pool?- Thanks
Reply
Hi, Todd. To determine if this pump will provide enough flow for your pool, you will need to check out these following guides How To Measure Total Dynamic Head With Gauges, How Do I Calculate Feet of Head for My Pool? and How to Size a Pool Pump for Your In-Ground Pool.
Reply
Would this pump be suitable for replacing a Jacuzzi Magnum 1000 pump. I have a 23000 gallon pool where there’s only a skimmer, an indirect return from the Pool bottom to the skimmer and just the two jets all on 1.5” plumbing? The pump is at same level as the pool but is 70ft away from skimmer and 50ft from the return jets. I have a 300lb sand filter and teledyne pool heater tied in. I plan to add 3-4 10ftx4ft solar panels in the near future that’ll be 12ft above the pump. Pool is perfectly clear
Reply
Hi, Gary. This pump will not be a suitable replacement for a Magnum 1000 Pump because they're two different styles of pumps which performs differently. You will need a high head variable speed pump like the Hayward Tristar VS Variable Speed Pump - SP3202VSP.
Reply
I have a Jandy PHPM 1.5 hp Is this pump as strong as that one. Also is this a good replacement for it. I know I will have to raise the Pureline up about 1.5 "
Reply
I have a Hayward super ii pump with a 1.5 hp motor. My pool is 24,000 gallons and it has a water heater I never use. I run it 5 hours a day when its not in heavy use and it stays clean. Would this pump works for me? Thanks!
Reply
Hi, Andres. To determine if this pump will work for you, the Total Dynamic Head (TDH) of your pool will need to be calculated. You can reference these following guides, How To Measure Total Dynamic Head With Gauges or How Do I Calculate Feet of Head for My Pool?.
Reply
I notice on this pump the top RPM is 3450..I think my current motor is a single speed which is 3450 RPM.. will the variable have a problem with the flow rate that the heat pump needs to operate? I noticed that once the PSI got up to about 23PSI (which I assume lowered the flow rate) the heat pump had a issue with flow..not enough. I'm guessing with anything less than 3450 RPM the heat pump won't work..any thoughts?
Reply
Hi, Dan. Operating this pump at a lower RPM can provide insufficient water flow to the heater. You will have to make sure that the motor is operating at the proper RPM in order to activate the water pressure switch on the heat pump.
Reply
I have an old Sta-Rite Dura-glas Pump 1 1/4 HP Single Speed - P2RA5F pump and would like to replace it with either this Pureline Prime Variable Speed or the Pentair Superflo 1.65 Variable Speed Pump. Would either of these options work well?
Reply
Hi, Peter. If you currently have 230 volts power, either pump will work. I would recommend this Prime Variable Speed Pool Pump 1.65 HP. The performance will be the same, you can use your existing timer etc.
Reply
Here's another Austin as I've been researching too much. Is this motor a PMM? Through my readings I've an that PMM's are a better bet, or at this size it didn't make too much of a difference.
Reply
Hi, Peter. This motor is a permanent magnet, totally enclosed fan cooled (TEFC) motor.
Reply
Hi, I chatted with y'all friday, but forgot to mention a fews things. I have an old Sta rite Glas II pump running by an A.O. smith 1 hp motor (this old slightly refurbishe motor replaced a 3/4 hp motor - impeller was changed to accommodate flow ratios. Anyway, I have a vinyl in ground ~10,000 gal pool, it has side suction and a skimmer, I also had solar panels installed for thermal solar heating of water on a flat roof area near pool. Would this pump still work well?
Thanks, Andy
Reply
Hi, Andy. Using the info provided, this pump will not be a suitable replacement. The pump you have is a high head pump and this is a medium head pump. The performance scale is different. The Hayward TriStar VS Pump - SP3202VSP will be a better option.
Reply
I'm replacing a Hayward Super Pump, originally had a 3/4 hp motor on it, I replaced it a few years ago with a 1 hp motor. My pool is 15,000 gal inground concrete with no features, a hayward cartridge filter and a wall mounted timer. Would you recommend this 1.65 hp pump or the smaller one?
Reply
I have a 30,000 gallon pool what sz motor does it
need?
Reply
Hi. To size a pump you can use our How to Size a Pool Pump for Your In-Ground Pool.
Reply
I currently have a Jandy HHPlus 1.5 hp pump running through a Jandy Ultraflex 2 filtration system with a 150gpm filter. The pool is clean and clear when running for about 7 hrs per day. I want to upgrade to a VS pump. What would you suggest for my application?
Reply
Hi, Jeff H. In order to determine which pump will be best for your application, I will need to know the Total Dynamic Head (TDH) of your system. Use our How To Measure Total Dynamic Head With Gauges and How Do I Calculate Feet of Head for My Pool? guides.
Reply
What determines the variable speed? Does that have to be adjusted or is it somehow a on-demand automation?
Reply
The controller on the motor is what you can program the speeds with and in whatever time intervals that you prefer. (I.E. 2500 RPM for 2 hours)
Reply
Can you recommend a cartridge filter compatible with this pump and suitable for a 10,000 gallon pool.
Reply
On the average for a swimming pool like yours with that pump, I would recommend any cartridge filter with at least 120 square foot of surface area.
Reply
I have a jacuzzi magnum force 1mf-s. I am wondering if this pump will drop in or should I just go with the carvin 15VMF-S2
Reply
Looking to replace a jacuzzi magnum force with 1.5 hp motor and 2 inch piping. max depth of pool is 5 feet. Approx 12X24 curved shaped pool. Is this pump a good fit, or could I go with the less expensive 1.5 HP pump. Pump is located within 25 feet of suction point.
Reply
Hi we currently have a 16x30 in ground saltwater pool, 6 feet on deep end, 3 feet approx shallow end. We have a DE filter that has max 72 gpm there is a single speed Hayward 1hp max XL pump motor. Our motor is expansive to run. I want to change it out for a variable speed unit and try and save money on the electric. Would this unit work or is there a better option?
Yes, this variable speed pump would be an adequate replacement pump for your application.
Reply
Would this be a good replacement for a Pentair VS-3050? I never ran that pump over 3,000 RPM. Also my existing setup is on a timer and the power cycles with it. Will this pump work with this type of timer setup?
Reply
Based on the total horsepower of the current model pump that you have the better option would be the model PL2606. If you are using a standard timer that allows or cuts of the circuit feeding power to the pump then yes you can still use that timer on this replacement pump.
Reply
I have a 28,000 gallon hayward superpump with emerson 1.5HP motor (model C55CXKMC-5013 with 56J frame). is the PL2605 the right replacement? Also if i want to add a SWG, does the new pump/motor need any modification? I think I read somewhere about an impeller change for saltwater?
Reply
Hi John, yes this would be the proper replacement for your Hayward Super Pump 1.5 HP no parts would need to be changed for salt. The PureLine Prime comes with a Viton Shaft Seal which is considered a Salt Friendly shaft seal.
Reply
I have a Hayward Gold Controls ProLogic automation system. I'm looking for a replacement pump for my Hayward dual speed super pump which I believe needs a motor. Would this unit work with my automation system?
Reply
Hi, Rob. This pump can be used, however, it may require the V-Green Automation Adapter Kit - 2517501-001 if you would like to assign specific speeds to a feature.
Reply
Does the PL 2605 have a wiring harness to plug in to an outside recepticle?
Reply
I am replacing a Hayward SP3007X10AZ with a 1hp. I Have a roof mounted solar system heater. The pool is appx 10,000 gallons with a built in 800 gallon spa. It is a salt system and I utilize a Hayward 11KW for the spa heat. I would like to replace it with a Purline Variable speed system. What unit should I get to best handle my configuration.
Reply
Hi David, For the set up you have described then the PL2605 PureLine Prime Variable Speed pump would be the ideal pump for you.
Reply
Instead of hardwiring the pump PL 2605, can't I use the wire harness from my old Hayward pump and connect it to the PL 2605 in order to plug it into my outside receptacle
Reply
Hi GK, as long as your wiring harness is 230V and not 115V then you will be fine using that as plug for this pump.
Reply
Want replace existing pump and chlorinator with variable or dual speed pump and Frog mineral system. Pool is 22000 gal and pump is about 20’ from pool. 2” lines. Replaced filter within last 2 years. Pool and pump original from 2002, motor gets replaced every couple of years. Suggestions?
Hi Mike, We would suggest the PureLine Prime Variable Speed Pump for your set up as it would work great. The decision you need to make is if you want to go with the 1.65 THP PL2605 or the 2.7 THP PL2606. Your current pump has a THP of 2.2 which is quite a bit higher than what is needed for a 22,000-gallon pool. With this being said I would suggest the PL2605 PureLine Prime 1.65 HP Variable Speed Pump. Here is a link to the various Frog Systems that would work for your pool.
Reply
How does the freeze option work? It says " must have start pushed" but unless I am missing something wont the pump already be running if start is pushed? I thought Freeze was for when the pump was shut off and the temp dropped?
Reply
Hi, Mark. Since the ECM165 motor does not have the ability to turn itself On or Off, it has to be running. When using the V-Green 270 User Interface - 2520652-001 it will allow the motor to turn on when off enabling the Freeze Protection.
Reply
I have a 27,500 gallon pool, 50' of head, 1.5" pipe and use chlorine.I want to switch to a variable speed pump. I have included a picture of the motor specs. Is this pump a good replacement?
Yes this would be a great Variable Speed Replacement Pump for the motor you have listed in the photo. The ports on this pump are 2" but you can use a standard reducer bushing to go from 1.5" to 2". You may have a little bit of re-plumbing but nothing major. By switching over to a variable speed pump you should see a huge savings on your operational costs.
Reply
Looking at the PL2605 as a replacement for my Hayward SP2607X10 with 1.0 hp Super Pump (Century model C48K2N143B1). I have a 32,000 gallon inground pool with 3 returns, 2 skimmers and a main drain. The piping is 1.5 inch. From most of the advice I've seen online, it seems like my current pump/piping may be undersized - but it was installed 18 years ago, and it's always performed well. I run the pump 24/7 during the swim season.
Is the PL2605 suitable for this?
Reply
Hi Jeff, Yes the PL2605 PureLine Prime would be a great replacement for your 1 HP Hayward Super Pump. You will have the ability to dial the pump up to 1.65 HP if you ever need to, however, the beauty of a variable speed pump is you can really dial down the HP for your general pool filtration and you will save a ton your operational cost, up to 80%! The PL2605 will be a drop in replacement for your Super Pump with the exception of the plumbing ports the Prime has 2" Ports where the Super Pump has 1.5" ports however standard 2" Male x 1.5" Slip adapters will allow you to adapt easily without any issue.
Reply
Hi I have a 30,000 gallon AGP. I am using a dual speed 1HP pump and a 19 inch sand filter with 1.25 inch plumbing. I am going to upgrade to 2 inch plumbing and a Hayward 27 inch sand filter. Will the 1HP pump be sufficient or do you recommend I buy another pump?
Reply
Hi Ronny, If you will be upgrading to 2" plumbing and 27" sand filter then this pump would be perfect for your set up. You will need to have 230V service for this pump.
Reply
I am looking at either the PL2516 or the PL2605 to replace my aging Pentair 1.65 SFHP Whisperflow pump. I have an 18,000 gallon pool an FNS plus 60 DE filter. As near as I have calculated I have 36.5 feet TDH. 2 inch piping. Which pump would more closely match my Pentair pump performance.
Thank you!
Reply
Hi Paul, The PL2605 PureLine Prime Variable Speed Pump will most closely match your Pentair 1.65 SFHP Whisperflow pump. We would suggest the PL2605 for your application. I think you will really like the variable speed controller and you will save a ton on your operational costs. The PL2605 has 2" ports so it will have no problem with your 2" plumbing. The plumbing ports on the Prime and Whisperflo are not in the exact same location so you will have a little bit of re-plumbing but it should be nothing major.
Reply
I have a 18x36 lazy l in ground pool with Hayward 1 hp super pump and Hayward 4000 series cartridge filter along with an in line boosted vacuum pump. Which pool pump would be best suited for my application in replacing the Hayward super pump? Thanks.
Reply
I have a 18x36 lazy l in ground pool with Hayward 1 hp super pump and Hayward 4000 series cartridge filter along with an in line boosted vacuum pump. Which pool pump would be best suited for my application in replacing the Hayward super pump? Thanks.
Reply
Just Ordered and installing tomorrow. Should I eliminate my current timer box for this pump?
Reply
Hi Jarrod, No you would keep your timer as your timer will power the pump on and off and then your controller settings on the motor will take over from there.
Reply
Hi. Can this unit stay outside in the weather? Will rain or snow etc damage it? Thanks
Reply
Yes the PureLine Prime Variable Speed Pump is weather proof and can stay outside in the weather and rain or snow will not damage it.
Reply
My pump went out over the weekend and wanted to see if this would work for our pool? We have 2 waterfalls that are only on when we have company. Thank you!
Hi Mike, Yes the PL2605 PureLine Prime Variable Speed Pump would be a great replacement for the motor in the photo. The plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing.
Reply
i have a 28000 gal inground pool with a smf 110 pump .it has a centry hsq1.25 pump what variable speed pump do I need
Reply
Hi Mike, this 1.65 HP PureLine Prime Variable speed would work as a great replacement pump for a smf 110 pump, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing, but nothing major.
Reply
I am replacing a 2HP single speed Pentair inteleflo pump. ca I use this variable pump
Reply
Yes the 1.65 HP PureLine Prime Variable Speed PL2605 would be a great replacement pump for a 2 HP Pentair. The plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing.
Reply
I have a 25000 gallon Inground pool with this pump. will the 1.65 work?
Hi, Matthew, In order to confirm, you will need to calculate the Total Dynamic Head (TDH) of your pool.
Reply
I am not quite clear on how to program the start time for the daily cycle. I would like to have the cycle start at midnight every day. Does that mean that I need to enter the settings for each step for the initial programming then hit the start button at midnight?
Reply
Hi. You will need an external timer like the T104P3 to turn the pump On and Off at the scheduled time. Once you've programmed the external timer, you can then program the speeds using the instructions in our How To Program A PureLine Prime Model PL2605.
Reply
Hi,
I have a Century Centurion e-plus Pool Duty 20 year old pool pump (see attached) that I need to replace, we've resolved to have to replum a new one in it's place so are thinking to go to a variable speed with possibly converting to salt since we have to re-do the piping. will this pump work?
2.0 hp
bolts 208-230
rpm 3450
ph 1
sf 1.20 or SF 10 . 4 -9 . 6
Thanks in advance
Tina
Hi, Tina. Unfortunately, we will need the Total Dynamic Head (TDH) of your pool or the model of the pump strainer in order to determine which variable speed pump will work.
Reply
I have no idea how to calculate it, there's currently copper piping that we think we're going to have to replace. so even if I could calculate tdh, it would change as I'm replacing the piping with PVC
Reply
I’m looking to replace a single speed motor with 56Y square flange. 15,000 gallon 16x32 oval pool. Have been using 3/4 HP (total HP 1.39) AO single speed motor with a Hayward Tristar pump. (Hayward Pro Series s244s foams filter). Have always felt it’s too much for the pool size. What variable speed (motor only) would you suggest for a replacement that will fit the Tristar pump?
Hi Flip, We would suggest this 1.65 HP Variable Speed Replacement Motor for your Hayward TriStar. We suggest this Hayward Tristar Tune Up Kit when replacing your motor.
Reply
1 - Is this the latest PureLine Variable Speed Pump?
2 - Do I still to connect it to my Intermatic control timer, or the pump works with his own internal timer?
3 - Any special offers on this pump ?
Reply
This model pump has an internal 24 hour clock but not an actual timer, however, you can connect this to an Intermatic timer for that. We currently are out of stock on these until late this year/early next year and you may be able locate a reward code coupon discount code on our Facebook page from a PC.
Reply
Need to replace motor of failing Pentair WF-24. While we could just replace the motor. Considering
Upgrading to a variable speed and salt water system.
Pool is ~12,000 gal 15x30 average 4 feet deep (rounding up)
suggestion as to best option?
Considering:
PureLine Prime Variable Speed Pool Pump 1.65 HP - PL2605
Pool Salt System 40,000 Gallons - PL7700
Hi, John. The WF-24 - Whisperflo 1 HP Pump will outperform this PL2605 - Prime Pump. To confirm if this PL2605 variable speed pump will work, you will need to calculate the Total Dynamic Head (TDH) of your pool.
Reply
No water features, 2.5" pipe. 12,000gal pool. Current non-oem pump is Century Centurion A.O.Smith Serial: BX11-25 Part: 7 -177474-01 Type: CX PR P56Y HZ: 60 RPM: 3450
Hi John after reviewing your information and your photo this 1.65 HP PureLine Prime Variable Speed Pump would be a great replacement pump for you, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing
Reply
I have an old Hayward single speed 1 hp , st1002, 115/230 volt pump and am looking to replace it. Would this pump work?
Thanks
This would be a great replacement pump for your current pump, the plumbing ports on this pump are not in the exact same spot as your current pump so you will have a little re-plumbing, but it should be nothing major.
Reply
I have a 12x12 SpaPool that's 3.5ft deep and need better water movement and cleaning suction, currently have a 1.25hp pump that is not so good, want to upgrade to a variable speed and 1.5hp, what do you recommend?
Reply
Hi, Miami22. In order to recommend a replacement pump, we will need to know the current filter size, pump model and or the Total Dynamic Head (TDH) of your SpaPool. Not all pumps are designed the same hydraulically.
Reply
I have a failing Pentair MPRA6G-155L, which is a 2-HP pump. It runs my pool and doodads pretty forcefully. I would like to get a variable-speed pump, but it seems like the only options are 3-HP, which is clearly overkill, and below 2-HP. I can't find info on the flow rate of the Pentair. Do you know whether your pump would be a good replacement?
Reply
Please provide more information about the pool. How big is the pool? What are the dimensions of the pool? What is the brand and model number of the filter? Do you have a heater? How far does the pool equipment sit away from the pool?
Reply
I ahve a 8,640 gallon in ground pool. I had a 1hp Hayward single speed pump. I want to up grade to a variable speed pump. What would you suggest. I currently use a suction clearer with a separate leaf catcher for cleaning.
Reply
The PL2605 pool pump would be a very good option for a variable speed pool pump for your current application.
Reply
My Ecostar Hayward SP3200VSP will not start, just makes a clicking noise and gives pump error. I've had this 2HP pump since Oct 2012 and has given me no problems but it has probably reached EOL at almost 7 yrs. Due to so many not so good reviews of a Hayward replacement, I'm considering a change to Pureline as recommended by INYOPools since it seems to be a good choice. Any comments appreciated . . .tks
Reply
Is pureline 1.65hp variable speed pump a permanent magnet design?
Reply
Yes, that is correct. Totally Enclosed Fan Cooled.
Reply
Ok so the motor in the variable speed pump is not induction type but is permanent magnet. I just want to be sure before I buy. So TEFC is same as permanent magnet? Thanks
Reply
Brewman, That is correct, TEFC is the same as permanent magnet motors.
Reply
I've got a PAC FAB/Pentair hyrdropump with a A.O Smith 1HP B122 motor, would this be a good replacement for that set up?
Reply
I am looking for a pentair pool pump 340038 replacement. It's on its last leg and using alot of power. I have a 9000 gallon pool with two small waterfalls. What would be a good replacement variable pool pump?
Yes, the PureLine Prime 1.65 HP VS is the best replacement for a Pentair Super Flo 1 HP. There will be some slight replumbing needed but flowrates are in-line with your current set up.
Reply
Do you have a break down of the Amp Draw like you have for the PL1615?
Additional Information
Amp Draw: 5 amps @ 3450 RPMS, 1.4 amps @2350 RPMS, .45 amps @ 1500 amps, .15 amps @ 750 RPMS
Wire Size: 14 AWG wire for wire runs up to 25', 12 AWG wire for wire runs 25' and greater
Reply
Scott, we apologize for the inconvenience, however, we do not have a breakdown of the amp draw for the PureLine Prime Variable Speed Pool Pump 1.65 HP - PL2605.
Reply
I am looking to replace my 1hp Superflow pump and Tangelus ta60 filter. Is this a reasonable replacement for the pump and can you recommend a compatible cartridge filter?
Reply
We have a 20' x 40'x 5' avg depth inground pool (30,000 gal) with 2 jets and a swimout with 2 more jets. Currently there's a hayward 3/4hp single speed pump and I would like to replace it with a variable speed, pump. first question: 1. Are there dc variable pumps available? If not, what do you suggest for best performance and best power efficiency? (current pump costs $200/month to run) looking to reduce that!
Reply
Our pumps will run off of AC and if you just replace the motor, depending on the model Hayward pump that you have, you may be able to use the motor model ECM16CU or the ECM16SQU. As far as complete variable speed pumps that we currently have in stock that match your total HP requirements you can consider the model 342001 or maybe the model PL2606.
Reply
would this be a reasonable replacement for a Hayward Maxi-Flo XL 1 1/2 hp sp 2310x15?
Reply
Hi, Dennis. This model pump can be used as a suitable replacement based on the Total Dynamic Head (TDH) of your pool.
Reply
Is this pump compatible with my AquaLogic automation & chlorination system, that is currently being used to control a single speed Hayward NorthStar 2hp pump; 18000 gallon pool, with a waterfall and 2 1/2" piping
Reply
The PureLine PureLine Prime Variable Speed Pool Pump 1.65 HP out of the box would not be compatible with your Hayward Aqualogic system. Purchasing the V-Green Automation Adapter Kit - 2517501-001 will allow you to adapt this pump and pair it with your Hayward Aqualogic system.
Reply
Is this a good replacement for my Sta Rite Max E Glass II? It is 1.5 HP. We have a sheer decent feature and a sweeper, creepy crawly, I believe. how does it compare to Hayward Ecostar or Pentair intelliclean? Is 1.65 HP large enough to be energy efficient at lower speed for us?
Hi. Unfortunately, without knowing the Total Dynamic Head (TDH) of your pool, we're unable to confirm if this pump will work. You can use our How To Measure Total Dynamic Head With Gauges or How Do I Calculate Feet of Head for My Pool? guides.
Reply
Can this pump replace my Hayward SP3200VSP TriStar VS Variable Speed Pump?
Reply
I have a Hayward SPX1607Z1M Motor Replacement for Select Hayward Pump, 1.0 HP Maxrate Motor for a 18 x 35 22,000 gallon pool. Would this pump be a suitable replacement?
Thanks
Reply
Hi, Craig. This pump can be used as a suitable replacement for the Hayward Super Pump or Hayward MaxFlo Pump using the SPX1607Z1M motor.
Reply
I have a pump that is using too much energy and doesn’t have much pressure. The wet end is a Hayward with 2” plumbing. My pool is approximately 35000 gallons. Will this pump be sufficient if I reduce the plumbing to 1.5”?
Hello Lance. Transitioning to a Variable Speed Pump will reduce power consumption and lower electrical costs. Power consumption is reduced by lowering pump RPMs, which results in a lower volume of water being circulated through the piping system (lower pressure at the return jets). The maximum volume of water being circulated is tied to, among other variables, pipe diameter. Reducing pipe diameter will increase pressure but reduce volume. It is possible to reduce the return jet diameter to accomplish an identical result. A replacement VS pump should be equal to or greater in horsepower to the existing single speed. A recommendation: Minimum 2.0 HP VS Pump with 2" port size. Waterway Power Defender 270 Variable Speed Pool Pump Hayward TriStar VS Pump 2.7 HP
Reply
