Part # W3SP1750
Self-Priming Pump Series
Power-Flo II is a high performance, low maintenance pump series available at an affordable price. For above-ground and in-ground pools requiring self-priming action, Power-Flo II is the pool professional's choice for superior performance and unparalleled quality.
|Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)|
|Model Number||10 ft||20 ft||30 ft||40 ft||50 ft|
|1 Year Warranty On Strainer Housing.
1 Year Warranty On Motor.
Click here for more Hayward Pool Pumps
I currently have a 1/2 hp motor for my pool. I have a DE filter with 20 sq. ft coverage. Max flow of 50 gpm. Would a 1 hp motor be too big?
Hi Rollie, so there are a few variables to consider when sizing a pool pump. Here are two guides that we created for sizing an aboveground pool pump and sizing an inground pool pump that should assist.
Due to freezing weather, the connection from the pre-filter and pump cracked. This is the part that is threaded on one side and 8 screws on the the outside. I only need to replace that part but cannot find where to buy it. The pump and filter are fine, just the round connector has a hairline crack. Maybe we could try aquarium glue on it but first I wanted to see what it would cost just for that part.
Hi, Sandie. Unfortunately, I was unable to locate a replacement part in our database.
I have a 1/2 HP Power-Flo 11 and would like a back up pump like. I seems to be easy on electricity, runs 115 volt, 110 outlet. Is there anything that would be better on electricity? And, why are these pumps more costly than 1 and 1 1/2 HP pumps?
Hi, There is not another pump that would be better on electricity than the 1/2 hp model, it is higher priced because of the supply and demand for larger size pumps.
just ordered Hayward pump part # does power cord come with the pump ?
No the power cord is sold separately. Here is a link to the 3-Prong Pump Power Cord, 3', 14 GA, 115V (SPX1250WA).
Why is the Power-Flo II with a 1/2 HP motor $70 more expensive than the Power-Flo LX with a larger 1HP motor?
Paul, That's because the Power Flo is for above ground pools only. The Power Flo II can be used on smaller in ground pools.
I need a pump for a large water fountain. The pump will set 3-6 feet above the water level of the fountain. Will this pump self prime and have sufficient suction head? Also, I am targeting 20-30 gpm flow rate, any concerns? And lastly I would like to put a filtration system downstream of the pump. What are my options for this size system. The volume of the fountain is 1120 gallons. Thanks
Hi James, The Power Flo II can only be installed up to 4 feet above the water level or will have issues priming. If installed and have less than 30 feet of head or resistance will provide the flow rate you're targeting. If the pump will be installed higher than 4 feet above water level you will need to go with a Waterfall pump, either the Hayward TriStar 75GPM Waterfall Pump or Pentair AFP-75 Waterfall Pump will be sufficient enough to be installed more than 4 ft above water level.
Is the Power-Flo II equipped with a power cord?
No, the power cord is sold separately. Here is a link to the power cord. http://www.inyopools.com/Products/07501352015032.htm
(5 out of 5 stars) Pump damaged in transit; replaced quickly
Reviewed By: Hubert H. from Fallbrook, CA ()
Received ordered pump and after opening case to connect wires discovered broken plastic switch. Called and got quick response from Matthew; he got me return instructions and I received a replacement promptly. Great price and service and saved over $40 vs purchasing from my local pool supply store.