Part # W3SP2615X20
Warranty 10 Year Warranty On Strainer Housing, 1 Year Warranty on Motor
Alternate Part #'s SP2615X20
High Performance Hayward Super Pump Series
Commonly Replaced Parts (Click on Link to view/purchase):
Specs:
Hayward Super Pump Application:
Add On Options:
Hayward Super Pump Features:
Dual Speed Benefits:
Performance Data
|
|
Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head) |
|||||
|
Model No. Max Rated |
20 ft |
30 ft |
40 ft |
50 ft |
60 ft |
70 ft |
|
SP2600X5 |
48 |
38 |
23 |
-- |
-- |
-- |
|
SP2605X7 |
61 |
52 |
41 |
25 |
-- |
-- |
|
SP2607(x10)(EE) |
74 |
64 |
54 |
40 |
13 |
-- |
|
SP2610X15 |
83 |
74 |
64 |
52 |
36 |
- |
|
SP2615X20 |
122 |
111 |
98 |
84 |
66 |
39 |
DO YOU HAVE THE FOLLOWING ITEM IN STOCK: Super Pump 2 HP Single Speed - W3SP2615X20. I LIVE IN TAMPA FL AND WOULD LIKE TO KNOW IF I PAY YOU SALES TAX.
Reply
Yes, this pump is in stock and there is Florida sales tax.
Reply
Can I use a 2hp motor with 1/1/2 piping. I need to upgrade for my fountain and water spouts?
Reply
John, While you can use 1.5" plumbing with this pump, you will be restricting the flow which will make the pump work harder.
Reply
If I change all the piping above ground level to 2", about 10' will this help the pump to create a better suction?
Reply
Hi John, Yes if you can add 2" pipe on the suction side of the pump then that will help even if it is just the section above ground.
Reply
Thank you I just wanted confirmation before I took any action.
Reply
Thanks John, also here is an article which you may find helpful - How to Fix Common Pool Plumbing Problems
Reply
Can I change the piping to 2” on lines running above ground going to the pump, filter and heater? Would that help
Reply
21' x 5' round above ground pool .previous pump was 2 hp hayward.
what do you recommend?
Reply
I have a Hayward Super Pump SP2615X20 that the pump motor locked up. I purchased a new Century Centurion B130 from a local store and installed it on my Super Pump. It's working ok and there are no leaks. What seal kit should I purchase to replace the shaft seal and other seals? Thanks!
Reply
The correct complete seal kit would be the GOKIT3 for a chlorine pool and the GOKIT3SALT is for a salt pool.
Reply
We have the following 2 HP motor nameplate information, does it identify the pumps? I'm told the pumps are becoming obsolete, could you recommend a replacement?
AO Smith SQ1202 (K48N2PA105C4), Serial 36009FM
AO Smith (C48M2N111A3), Serial 30508FM
Thank you, Tom Goshulak
Reply
The first motor is showing as an SQ1202 and the second is showing as a UST1202. If you need assistance locating the complete pump and are not sure of those models you can always email images of those to upload@inyopools.com. We, unfortunately, cannot use serial numbers.
Reply
Hi! I have an A O Smith motor (Model K48N2N104, Serial 13210FM) and pump that has Hayward pool products label on it ( Model # RS2000) Serial # 21111006051758002
What would be a good option to replace both of them? Thanks!
Reply
Hello, the closest fit to your current system would be the SP3020X25AZ.
Reply
i have a 2.5 HP POOL PUMP (HAYWARD SUPER PUMP II) but i see that i have be paying to much money for the electrical bills,..there is any way to drop the bills cost for the service. know that the motor burn out. the main drainer to the pump 2inches pvc 50 feet.ill thank you guys to help me me out with this matter.leting me know wath can i do to solve this problem with a minimum cost
Reply
I have a older Hayward Northstar pump , SP4015X202. it needs to be TOTALLY replaced. I have 2" plumbing, could you tell me what I need to replace it with?
Reply
Hi, Chuck Milligan. The Hayward TriStar Pump - SP32152EE or is the what I'll recommend for the Northstar Pump SP4015X202.
Reply
I have a 9 year old Hayward super pump SP2600z9. This seems to be the same pump but mine seems to have 1 1/2 ports(and 1 1/2 piping after) . Did they change the default port size on these? The motor is having more and more trouble starting and the threads on the basket plug ports will not keep the plugs tight anymore.
Is this the best substitute(most comparable).
Thanks
Reply
The older Super Pumps have 2" ports and the newer Super Pumps have 1.5" ports so if you have 1.5" plumbing the new Super Pump would fit your system perfect.
Reply
I have around 90 feet of head but my pipes are only 1 1/2 inch. Which pump would you recommend and what HP?
Reply
Hi, Tony. A pump that can perform at 90 feet of will have 2" ports. You will need a high performance pump but to determine the horsepower we will need know know the desired flow rate.
Reply
I had a Hayward SP4015x20 2 hp pump and cannot find a replacement? Do you have something that would work?
Reply
Hi, Gerald. The Hayward TriStar 2 HP, Max Rated Pump - SP3215X20 is the pump that would replace the obsolete Northstar pump.
Reply
Looking to replace a full pump an motor and wanted to see if this Super Pump would work? I currently have an old SmartMax Star Pump 2.70/.33 THP; 2.5/.30 MRHP/1.10 SF that I'll be replacing. Thanks!
Reply
Hi, AJ. The Super Pump is not a good replacement for the pump you have. I would recommend the Hayward TriStar 2 HP, Energy Efficient, Full Rated Pump - SP3220EE.
Reply
Upgrading from an EC65A with a 3/4 hp pump to a EC75A with a 2 hp pump. What else will I need to replace? Are the fittings the same? Will I need to swap anythng except the filter and pump?
Reply
Hello, The main thing you will need to consider is that the 2HP pump has 2" ports. The 3/4HP you're replacing likely has 1.5" ports. Other that the pump connections, everything else should be the same.
Reply
Might have to replace my Hayward 1.5hp pump. Might go with a 2hp just to improve circulation. What is the advantage of a 2 speed pump vs single speed?
Reply
The advantage of the 2 speed is that it offers a more energy efficient option. The low speed draws less amperage hence using less electricity. Also please confirm with one of our techs or a licensed contractor, that the gallons per minute rating is compatible between both the model of the filter and pump before you make any changes.
Reply
I have this pump since the pool was installed 7 years ago. Today started to hear what sounds like the bearings starting to make some noise. What are my replacement options?
Reply
J, You can replace it with a dual or variable speed pump for extreme energy savings or stay with the exact model you have. Super Pump 2 HP Dual Speed or Hayward Max-Flo VS Variable Speed Pump
Reply
I currently have a Hayward RS2000 2HP pump.
Is that still a current model and do u have it or a replacement model ?
Reply
Bob, The RS Series Pump line is the same as the Hayward Super II EE Pump. The Hayward Super 2 EE Pump 2 HP Single Speed model will be the direct replacement for the RS2000 model.
Reply
What is the speed of this pump? It indicates single speed but no RPM speed indicated.
Reply
Good Day. The speed of a single speed motor is 3450 RPM. This is taken from the U.S. Department of Energy web site : The two-speed pump uses an induction motor and is basically two motors in one with a standard 3,450 rpm (full-speed) motor and a1,725 rpm (half-speed) option.
Reply
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
The Most Helpful Review
38 1
(4 out of 5 stars) hayward pump
Reviewed By: pumba from youngstown ohio ()
Pros: great price, durable pump, brand new!
Cons: a little wait for delivery but not bad
mostly i was looking for a better price on a replacement pump for my pool. i save about $150 by ordering from inyopools. i was a bit worried that it might not be what they said, but it was in fact new, in original packaging, durable, warranted, and shipped right to my home
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Super Pump 2 Hp, single spped
Reviewed By: Timothy from Orlando, FL ()
Great pump, easy to install, quick shipping at a great price...thanks INYO Pools
Was this review helpful to you?
(5 out of 5 stars) Super pool pump!
Reviewed By: Peter B. from Sunrise, FL ()
Great pump and price. Delivered on time!
Was this review helpful to you?
(5 out of 5 stars) Dependable inground pool pump
Reviewed By: Chuck M. from Michigan ()
Pros: 220v, quiet and efficeint, good price
Cons: 5 year average life of motor.
I have been using this 2HP pump since I built the pool in 98. Seems to work very well for my small 15,000 gallon pool.
Was this review helpful to you?
4 0
(5 out of 5 stars)
Reviewed By: jimmymath from MIAMI, FL ()
Pros: Great product the last one was installed in '75 with 1 motor replacement til now
incredible shipping 2 days great price lower than any discount internet or local dealer price I still don't know how it got here that fast I ordered mon. and wed.2pm it was delivered
Was this review helpful to you?
1 0
(5 out of 5 stars) Hayward Pump
Reviewed By: Monkey from Orlando, FL ()
I got Inyo's number from the internet, I called and a very friendly, personable gentleman answered all my questions. I bought the Hayward pump and since I live in Orlando, went to pick it up the next day. Inyo's price was the best of all the other sites I visited or called.
Was this review helpful to you?
1 0
(5 out of 5 stars) awsome pump
Reviewed By: Jeff Davis from Hazlehurst,Ga ()
Pros: quiet,powerful
Was this review helpful to you?
3 0
(5 out of 5 stars) Excellent Jacuzzi Pump
Reviewed By: PS-Jacuzzi from Palm Springs, CA ()
Pros: The self-priming pump is outstanding
Cons: Shipping could have been better
The product itself is outstanding. However a couple of small parts were damaged during shipping... and were very promptly replaced. Staff were very friendly and accommodating.
Was this review helpful to you?