1.5 HP Round Flange 56J Up Rate Motor - PL1152

$144.99

IN STOCK
FREE SHIPPING

Part # PL1152

By PureLine

  4.5 Average  

Details

Top

Part # PL1152

Warranty 1 Year

Alternate Part #'s 168099, 177020, 184948, 186922, 54024, 5KCR39SN2823X, 8-168099-20, 8-177020-20, 8-177020-21, 8-177020-23, 90118571, B229, B229SE, C1319, C48L2N131A7, C48L2N134, C48L2N134A3, C48L2N134A4, C48L2N134A5, C48L2N134A9, C48L2N134B1, C48L2N134B3, C48L2N134B4, C48L2N134B5, C48L2N134C1, EB229, JD15FL1, JD15UP1, K48L2N103, sp-1610-z1-m, SP1610Z1M, SPX1610Z1M, UST1152, V54024

Product Description



PureLine 1.5 HP Replacement Pool Motor for Hayward & Jacuzzi Pumps

Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL1152 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 1.5 HP pool pumps like the Hayward Super Pump, Hayward Super II, Hayward Max-Flo, Jacuzzi Magnum and many more.

The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction the PureLine replacement motor is backed by a full 1-year warranty.

When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.

When replacing your motor we highly recommend a tune up kit which includes all the seals and gaskets for your pump. Many times when you use your old seals you may have leaking and seal leakage is one item which will void the motors warranty so make sure to protect your investment with a tune up kit. Below we have listed the tune up kits for some of the most popular pool pumps.

Don't Forget Your Tune Up Kit

Hayward Super Pump Tune Up Kit
Hayward Super II Tune Up Kit
Hayward Max-Flo Tune Up Kit
Jacuzzi Magnum Tune Up Kit

Note: NOT California Title 20 Compliant. 

California Title 20 Compliant Options:

Product Specifications

Motor Name:
1.5 HP Pool Motor Round Flange 56J
Commonly Used On:
Hayward Super Pump, Hayward Super II and Jacuzzi Magnum
HP:
1.5 HP
Flange:
Round
Speed:
Single
RPM:
3450 RPM
Volts:
115/230 V
Amps:
18.0/9.0 amp
Service Factor:
1.0
Total HP:
1.5 HP
Frame:
56J
Shaft:
Threaded
Notes:
NOT California Title 20 Compliant
Top

?     Asked on 10/12/2019 by Alex Forjan

Does this motor ramp up at start or full steam ahead at all times?
 Reply

A  Answered on 10/14/2019 by InyoPools Product Specialist Hector F.

This motor is a single speed that runs at 3450 RPMs at all times.
 Reply


?     Asked on 10/3/2019 by frank

will this motor replace hs125 type b #c48ab45a01 1.25hp 115/230kw rpm 3450
 Reply

A  Answered on 10/3/2019 by InyoPools Product Specialist Steve M.

Frank, no, the 1.5 HP Round Flange 56J Up Rate Motor - PL1152 would not be the correct replacement. The direct replacement for your HST125 MOD# C48AB45A01 would be the A.O. Smith 1 HP Square Flange 48Y Up Rate Motor - USQ1102.  
 Reply


?     Asked on 9/30/2019 by william casanova

My pool pump model is C48C53AO6, serial 26312fm, 1 1/2 hp. which pump is the equivalent?
 Reply

A  Answered on 9/30/2019 by InyoPools Product Specialist Steve M.

William, the C48C53AO6 motor cross-references the A.O. Smith 1.5 HP Round Flange 56J Up Rate Motor - UST1152. The 1.5 HP Round Flange 56J Up Rate Motor - PL1152 would work as well. 
 Reply


?     Asked on 9/29/2019 by Chip

Do these motors have thermal protection? The reason I ask is my two lead wires touched and popped the breaker, moved the wires so could not touch motor hums now , but put my fluke on the leads and I have 220 going to motor, thanks, hopefully they do.

 Reply

A  Answered on 9/30/2019 by InyoPools Product Specialist Hector F.

Both the Hayward and the Pureline motors have thermal overload switches however a voltage overload can create a short causing the motor to fail.  
 Reply


?     Asked on 9/29/2019 by Chip

Do these motors have thermal protection?
 Reply

A  Answered on 9/30/2019 by InyoPools Product Specialist Hector F.

Yes, these motor have a thermal overload protection switch. 
 Reply


?     Asked on 9/18/2019 by Mark

Will this motor fit a Hayward Super Pump: Mod. # SP2610X15? 56J frame.
 Reply

A  Answered on 9/18/2019 by InyoPools Product Specialist Hector F.

Yes,this motor is a suitable single speed replacement for the original SP2610X15 model pool pump.
 Reply


?     Asked on 9/9/2019 by David Robbins

Will this one not work?
 Reply

A  Answered on 9/26/2019 by InyoPools Product Specialist Hector F.

It would not because it actually does not have the same total HP. The ST1152 is stronger by about a half of a HP. 
 Reply


?     Asked on 9/9/2019 by David Robbins

Will this replace model K48M2N110?

 Reply

A  Answered on 9/9/2019 by InyoPools Product Specialist Hector F.

Your motor model is actually model ST1152
 Reply


?     Asked on 9/6/2019 by Mark McGhee

OK so it will mount up to the pump with no problem? So do you have these motors in stock?
 Reply

A  Answered on 10/1/2019 by InyoPools Product Specialist Hector F.

Yes, this motor will mount up to your pump housing and we currently do have these in stock. 
 Reply


?     Asked on 9/6/2019 by Mark McGhee

Will this motor replace my current motor model #SP2602VSP Hayward
 Reply

A  Answered on 9/6/2019 by InyoPools Product Specialist Lennox H.

Hi, Mark. Yes, you can use this PL1152 motor to convert your variable speed pump to single speed. 
 Reply


?     Asked on 8/31/2019 by david e heilmann

DOES THIS PUMP FIT THE C48L2N134B1
 Reply

A  Answered on 8/31/2019 by InyoPools Product Specialist Lennox H.

Hi, David. Yes, this PL1152 motor will replace MOD C48L2N134B1.
 Reply


?     Asked on 8/18/2019 by pat

What is the country of origin?
 Reply

A  Answered on 8/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Pat. This product country of origin is China. 
 Reply


?     Asked on 8/15/2019 by Mark

Would this motor work as a replacement, also we have a saltwater system so what else will I need.

 Reply

A  Answered on 8/15/2019 by InyoPools Product Specialist Hector F.

Yes, this would be a single speed replacement motor for your motor model and in order to cross reference the correct seals and gaskets we would need the model name or number of the front pump housing that the motor actually attaches to. If you cannot locate that information you can email images of that housing to upload@inyopools.com so we can confirm and further advise. 
 Reply


?     Asked on 7/24/2019 by Robert Osborne

Will this replace a Hayward super pump SP2160X15A, The motor is a Century model C48L2N134B3, 11/2 HP, Cface 56J thanks bob
 Reply

A  Answered on 7/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. Yes, this PL1152 motor can be used as a replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT
 Reply


?     Asked on 7/24/2019 by David

Is the PL1152 a replacement for an AO Smith C48L2N134C2 ST1102? The PL1152 is a 1.5 hp SF 1.0 and the ST1102 is a 1.0 hp SF 1.5. The PL1152 is also less expensive than your ST1102 direct replacement.
 Reply

A  Answered on 7/24/2019 by InyoPools Product Specialist Hector F.

Yes, the PL1152 would be a suitable replacement single speed motor for your model motor. 
 Reply


?     Asked on 7/10/2019 by

Will this pump replace the Hayward SP1610Z1M

 Reply

A  Answered on 7/10/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, this PL1152 motor can be used as a replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT
 Reply


?     Asked on 5/24/2019 by Daniel

Need a replacement motor for my in-ground Jacuzzi pool pump. I can hear the motor start but shuts itself off after about 15 seconds. Here is a photo of the pump motor specs. Hard to read but perhaps Model #:10-184949-22??? I am sorry it is not totally clear but the motor is 25 years old. The pump itself has a 2" inlet.

 Reply

A  Answered on 5/24/2019 by InyoPools Product Specialist Patrick P.

Hi Daniel, This motor would work for your motor in the photo but it is currently out of stock so I would suggest the Century UST1152 Motor which is a direct replacement for your motor. I believe you have a Jacuzzi Magnum, could you double check? If so then you will require this Jacuzzi Magnum Seal Kit when you replace your motor. We also put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 5/8/2019 by JB

What GOKIT do I need to install this pump? I am installing on a Hayward SH 2800
 Reply

A  Answered on 5/8/2019 by InyoPools Product Specialist Hector F.

That model SH2800 pump does not come up in our system nor am I seeing google recognizing that model. Please send images of that pump housing to upload@inyopools.com so we can review it and advise.
 Reply

  • Commented on 5/9/2019 by Product Owner

    Based on my research, I believe I need the PL1152. Need to know the matching gokit please.

     Reply

    • Commented on 5/9/2019 by InyoPools Product Specialist Patrick P.

      Hi James, Thanks for the photos those helped out a lot! You will require the MaxFlo Tune Up Kit
       Reply


?     Asked on 5/1/2019 by Dagmar

I have a inground pool 20x40 with a 1 HP motor. Is it possible to use a 1.5 HP motor and what would I have to change to get a higher HP motor? Thanks
 Reply

A  Answered on 5/3/2019 by InyoPools Product Specialist Patrick P.

Hi Dagmar, Yes this would be possible but we would need a photo showing your complete pump, this would be a wide shot showing the entire pump including where the plumbing goes in and out of the pump. We would also need a photo of the motor label showing the specs. like amps, HP, volts, SF, etc.. To supply these photos simply click on the reply link below to upload your photos. Once we receive the photos then we can let you know which parts you will require.
 Reply


A  Answered on 5/3/2019 by Product Owner

Have one horsepower Hayward Pump

 Reply


?     Asked on 4/14/2019 by

is this a good replacement for my Hayward Super pump 1 and 1/2 hp.
 Reply

A  Answered on 4/15/2019 by InyoPools Product Specialist Patrick P.

Yes this is the proper replacement motor for your Hayward Super Pump 1.5 HP. We would suggest this Hayward Super Pump Tune Up Kit when replacing your motor. We also have a Video on How to Replace Your Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 6/11/2017 by diane silva

My pump in not working and it is S15LR3 what pump is compatibe
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

We would suggest this Carvin SLR 1.5 HP Replacement Pump this will be a direct replacement for your S15LR3 pump.
 Reply


?     Asked on 5/30/2017 by Shane

What impeller is needed with this for a SP2607X10 (Hayward Super Pump)?
 Reply

A  Answered on 5/31/2017 by InyoPools Product Specialist Hector F.

If you have the original motor that came with the complete pump assembly or an equivalent replacement motor on it then the impeller part number would be part number 5110-10CA.
 Reply


?     Asked on 5/5/2017 by

Can I order the impeller for this motor?
 Reply

A  Answered on 5/5/2017 by InyoPools Product Specialist Scott W.

Yes, I will need the pump model to identify the correct impeller.
 Reply


?     Asked on 4/25/2017 by Kelly

What is the difference between this Pool Pump Motor (PL 1152) and the Century UST 1152 (my current Pool Pump Motor). Thanks in advance
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Scott W.

The difference is the PL1152 is our brand and is a direct replacement to the Century motor.
 Reply


?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/18/2012 by Guest

I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help. 
 Reply


?     Asked on 1/12/2012 by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/12/2012 by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/11/2012 by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Socket Set, Wrench Set

1     0

Bad pump moter

Written on 5/6/2017 by Guest

Found problem and looked for reliable supplier for replacement parts.
Consulted Inyopools for right parts and made the order.
Inyopools provide me with step by step repair video. As easy as that.
Thanks to Inyopools.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews