What is the difference between this Pool Pump Motor (PL 1152) and the Century UST 1152 (my current Pool Pump Motor). Thanks in advance
Reply
The difference is the PL1152 is our brand and is a direct replacement to the Century motor.
Reply
What impeller is needed with this for a SP2607X10 (Hayward Super Pump)?
Reply
My pump in not working and it is S15LR3 what pump is compatibe
Reply
We would suggest this Carvin SLR 1.5 HP Replacement Pump this will be a direct replacement for your S15LR3 pump.
Reply
Does this motor need a capacitor? The one I have has one Hayward ST1152 56J frame,220volt. The Model number I cannot read it all- K43MRN -10 is all I can make out. 19.4amps/9.7 3450RPM
Reply
I have a new ust1102 motor but need in ground pump to fit can you help?
Reply
Hi, Doug. Complete pumps are not available without a motor. You will either have to purchase a new pump with the motor or purchase the pump parts a la carte.
Reply
is this a good replacement for my Hayward Super pump 1 and 1/2 hp.
Reply
Yes this is the proper replacement motor for your Hayward Super Pump 1.5 HP. We would suggest this Hayward Super Pump Tune Up Kit when replacing your motor. We also have a Video on How to Replace Your Pool Pump Motor which you may find helpful when you tackle this project.
Reply
I have a inground pool 20x40 with a 1 HP motor. Is it possible to use a 1.5 HP motor and what would I have to change to get a higher HP motor?
Thanks
Reply
Hi Dagmar, Yes this would be possible but we would need a photo showing your complete pump, this would be a wide shot showing the entire pump including where the plumbing goes in and out of the pump. We would also need a photo of the motor label showing the specs. like amps, HP, volts, SF, etc.. To supply these photos simply click on the reply link below to upload your photos. Once we receive the photos then we can let you know which parts you will require.
Reply
Have one horsepower Hayward Pump
Hi Dagmar, Thank you for the photos those were quite helpful! You have a Hayward Max Flo Pump and if you want to upgrade to 1.5 HP then here are the parts you will need. PL1152 1.5 HP Replacement Motor you will also need a 1.5 HP Hayward Max Flo Impeller as well as a Hayward Max Flo Tune Up Kit These parts will upgrade your pump from 1 HP to 1.5 HP.
Reply
What GOKIT do I need to install this pump? I am installing on a Hayward SH 2800
Reply
That model SH2800 pump does not come up in our system nor am I seeing google recognizing that model. Please send images of that pump housing to upload@inyopools.com so we can review it and advise.
Reply
Based on my research, I believe I need the PL1152. Need to know the matching gokit please.
Hi James, Thanks for the photos those helped out a lot! You will require the MaxFlo Tune Up Kit
Reply
Need a replacement motor for my in-ground Jacuzzi pool pump. I can hear the motor start but shuts itself off after about 15 seconds. Here is a photo of the pump motor specs. Hard to read but perhaps Model #:10-184949-22??? I am sorry it is not totally clear but the motor is 25 years old. The pump itself has a 2" inlet.
Hi Daniel, This motor would work for your motor in the photo but it is currently out of stock so I would suggest the Century UST1152 Motor which is a direct replacement for your motor. I believe you have a Jacuzzi Magnum, could you double check? If so then you will require this Jacuzzi Magnum Seal Kit when you replace your motor. We also put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
Will this pump replace the Hayward SP1610Z1M
Hi. Yes, this PL1152 motor can be used as a replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT.
Reply
Is the PL1152 a replacement for an AO Smith C48L2N134C2 ST1102? The PL1152 is a 1.5 hp SF 1.0 and the ST1102 is a 1.0 hp SF 1.5. The PL1152 is also less expensive than your ST1102 direct replacement.
Reply
Yes, the PL1152 would be a suitable replacement single speed motor for your model motor.
Reply
Will this replace a Hayward super pump SP2160X15A, The motor is a Century model
C48L2N134B3, 11/2 HP, Cface 56J
thanks
bob
Reply
Hi, Robert. Yes, this PL1152 motor can be used as a replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT.
Reply
Would this motor work as a replacement, also we have a saltwater system so what else will I need.
Yes, this would be a single speed replacement motor for your motor model and in order to cross reference the correct seals and gaskets we would need the model name or number of the front pump housing that the motor actually attaches to. If you cannot locate that information you can email images of that housing to upload@inyopools.com so we can confirm and further advise.
Reply
Do these motors have thermal protection? The reason I ask is my two lead wires touched and popped the breaker, moved the wires so could not touch motor hums now , but put my fluke on the leads and I have 220 going to motor, thanks, hopefully they do.
Both the Hayward and the Pureline motors have thermal overload switches however a voltage overload can create a short causing the motor to fail.
Reply
My pool pump model is C48C53AO6, serial 26312fm, 1 1/2 hp. which pump is the equivalent?
Reply
William, the C48C53AO6 motor cross-references the A.O. Smith 1.5 HP Round Flange 56J Up Rate Motor - UST1152. The 1.5 HP Round Flange 56J Up Rate Motor - PL1152 would work as well.
Reply
will this motor replace hs125 type b #c48ab45a01 1.25hp 115/230kw rpm 3450
Reply
Frank, no, the 1.5 HP Round Flange 56J Up Rate Motor - PL1152 would not be the correct replacement. The direct replacement for your HST125 MOD# C48AB45A01 would be the A.O. Smith 1 HP Square Flange 48Y Up Rate Motor - USQ1102.
Reply
What motor will replace my 1 1/2 HP model C48AB45AO1 HSQ 125 B. And is it a round flange or square ?
Reply
wireing setup for 120 electric
Reply
Hi. Instructions are available in the How to Wire a PureLine Motor on 115V guide.
Reply
THENE POWER MODEL #CM4SM2571L Also Shows a Place card with Model Number 72748 / I need a replacement motor...Which One you suggest.. Thanks Gil
Hi, Gilberto. Unfortunately, we do not have a replacement motor for your model pump.
Reply
When you buy a new pool pump motor does it come with the needed gaskets
Reply
Hi, Rick. The pump gaskets are NOT included with the motor, they will have to be purchased separately based on the pump housing model.
Reply
Is this the proper replacement for a Leslie’s RS series pump motor?
SP-1610-Z1-BE
I will also need a basket and a tube up kit
can i use this motor on hayward sp 3015EE or do i have to use something like ST1152
Reply
Hi, Larry. The ST1152 motor is the correct replacement for your model pump. You will also need the Super II Pump Tune Up Kit - GOKIT2 or GOKIT2SALT.
Reply
I'm not sure what model # the original Hayward super II pump motor was, but this is what Leslie's has substituted;
US Motors 1081 56J Frame Model# K63CXDGJ-5170 1.5hp.
Reply
Hi, Jim. This PL1152 motor will NOT work, you will need the Century 1.5 HP Round Flange 56J Full Rate Motor - ST1152 along with the Super II Pump Tune Up Kit - GOKIT2 or GOKIT2SALT. .
Reply
I have a Hayward Super Pump. Most of the label on my motor is too far gone to read, but I can see that it is a 1.5 hp motor. Is this the correct one?
Hi, Ginger. Yes, this PL1152 motor is the correct replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT.
Reply
What size wire should I use to connect a PL 1152 pool pump motor to a timer, it would be wired up for 220 volts.
Reply
Hi, John. If the motor is within 50 feet operating at 115 volts you will need a #10 and at 230 volts #14.
Reply
I have 1HP hayward super pump motor can I replace it with pureline 1.5 PL 1152
Reply
Hi Gerard, If you have a 1 HP Super Pump then you could actually use the PureLine PL1102 1 HP Replacement Motor
Reply
Need a replacement motor for a Hayward SP2615X20 pump. This is not original motor. Pool is apprx. 250,000 gallon in ground approx 30 ft of head pressure.
Hi, Blake. The UST1202 motor is the correct replacement. You will also need the Hayward Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT.
Reply
I have a 18X36X4 above ground. I purchased a used Hayward Perflex EC65A filter with Max Flo pump SP2810X15 pump. Problem is motor trips internal load or breaker. Will run couple seconds then trip. I am running 1 1/2 pipe to 1 skimmer and 1 return. Amps out at 94 Amp 220 volt. Pump water when runs. Motor turns freely. Is UST1152 century proper replacement and what else will I need as far as seals and gaskets? Also would running this size pipe cause restriction and high amp? Thank you......
Reply
Hi Raymond, Yes the US1152 Motor is the correct replacement motor for your Max Flo. You will also require this Hayward Max Flo Seal Kit. You would benefit by going with 2" pipe on the inlet port of the pump, if you could get a 12" - 18" straight run of pipe going into the inlet that would help. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project. We also put together this Video on Common Pool Plumbing Problems which you should watch as well.
Reply
I need to replace my motor. The issue I have it is a very old Hayward and the tag on top is mostly unreadable. I can get the following information
Dual Speed Self Priming Super Pump SP-125-J(s) something comes after the J but can read.
SP-2600-E
only numbers I could find. Is this the right replacement motor or do I need another model?
Reply
Hi Jeffrey, in your case, we would advise locating the part number that will be molded onto the impeller as that will confirm your compatible replacement motor options.
Reply
I have to replace a motor on an old Haywood pool pump. it is a pentek 1.5 hp pool pump motor model c48ab65a03. What is the least expensive option?
Reply
Hi Patrick, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
