Hayward 1.5 HP Round Flange 56J Dual Speed Up Rate Motor - SPX1610Z2M

$562.37

IN STOCK
FREE SHIPPING

Part # SPX1610Z2M

By Hayward Pool Products


Details

Top

Part # SPX1610Z2M

Warranty 1 Year

Alternate Part #'s HAY-101-1420, HAYSPX1610Z2M

Product Description

Hayward Motor, 1.5 HP, Voltage Rating:  230V, Frequency Rating: 60 Hz, 1-Phase, 2 -Speed, Threaded Shaft, For Use With: Max-Flo(TM) SP2800X and Super II(TM) SP3000X Series Pumps

Top

?     Asked on 7/14/2022by Ronald Rice

DOES THIS MODEL REPLACE AN SP1610Z2MC?
 Reply

A  Answered on 7/14/2022 by InyoPools Product Specialist Craig C.

Hello Ronald.  The Hayward 1.5 HP Round Flange 56J Dual Speed Up Rate Motor - SPX1610Z2M is a compatible replacement dual speed motor for the Hayward motor model SP1610Z2MC
 Reply


?     Asked on 6/16/2021by Rashid Abdullah

My SPX1610Z2M has 6 bolt connection and i only see 4 in picture, what will be the correct one for me
 Reply

A  Answered on 6/16/2021 by InyoPools Product Specialist Craig C.

Hello Rashid.  The Hayward motor model SPX1610Z2M is the exact motor replacement to your current model.  The motor is attached to the motor mounting plate using four (4) bolts.  This assembly is then attached to the pump wet end using six (6) bolts.  Attached please find an exploded part diagram for a Hayward Super II pool pump.  As an example please note how the motor mounting plate (#13) is attached to the motor (#15) using 4 bolts (#11).  This assembly is attached to the pump housing (#1) using 6 bolts (#14).   Hayward Super II SP3000 Series
 Reply


?     Asked on 5/12/2021by Inyo Visitor

why does the item description say the part # is SPX1610Z2M but the picture says it's a SPX1615Z2BC?
 Reply

A  Answered on 5/13/2021 by InyoPools Product Specialist Robert M.

The picture is different because the same image used on several products. If you order this part, you will receive part number SPX1610Z2M.
 Reply


?     Asked on 9/9/2016by Inyo Visitor

I purchased this motor to attach to my pump model SP2610X152S. What seal fits? I went to the local pool store to buy the seal kit and it's too small. They said the one they sold me fits all 2600 but it certainly doesn't fit.
 Reply

A  Answered on 9/9/2016 by InyoPools Product Specialist Scott W.

The seal kit is part number GOKIT3.
 Reply


?     Asked on 1/18/2012by Guest

Can you direct me to the proper hi low switch for this motor?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)