I have an older model whisper flo wf 4,,,and it runs my pop ups,,not my filter,,and it is leaking water at the bottom of the seal plate,,new gaskets did not help ,,maybe my seal plate flange is warped from overtightening,,I doubt if the housing is warped will this item fit my pump??
Reply
Hi Ron, The WFE Seal Plate (074564) will work with your older model WF-4 Pump.
Reply
Do you know what the torque specs are for the bolts? The previous one was had broken around the nut well do to overtightening. Thanks
Reply
I would recommend contacting Pentair at 1-800-831-7133. Unfortunately we do not have the information to properly answer your question.
Reply
how does the seal plate come off after you have disconeted the pump
Reply
Hello, Richard. You will need to remove the diffuser cover and impeller first. I have included a link on How To Replace the Motor on Your Pool Pump http://www.inyopools.com/HowToPage/how_to_replace_the_motor_on_your_pool_pump.aspx The link is not specific to the Whisperflo, though, it will provide a general overview on how remove the parts.
Reply
What is the required seal plate for a Pentair WhisperFlow WF-28 pump.
Reply
Hi, Bob. This Seal Plate - 074564 will fit the WF-26 Pump.
Reply
if i change seal plate 5074-18a from my 56y frame motor , with seal plate 5074-38 of a 48y frame, on my existing WF-12 pump housing, can I then add variable speed motor ECM27SQU and have everything else line up?
Reply
I have a whisperflo wf-26 pump made before 2008 . I always have used the almond plate gasket which is for units made before 2008. With this new seal plate which gasket should I use, Thank you
Reply
The seal plates manufactured before 1-31-2008 would be part number 5020-062 that you can view by clicking here. If you need to confirm date of manufacture you will need to provide the serial number to Pentair so they can advise. Their phone number is 1-800-831-7133 .
Reply
I have a Pentair Pool Pump: Part 7-177451-03 and we are looking for parts for it. Can you advise, what alternate part numbers would work with this?
Reply
Hi Melanie, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Looking to replace the seal plate and the O ring on our part 7- 177451-03. Picture attached. Can you help me.
-WF-SERIES-074564.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-WF-SERIES-074564.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Custom Molded Products Seal Plate Compatible with Pentair WF series WhisperFlo Pumps - 074564")
Unfortunately, we cannot use this image as the seals and gaskets are actually based on the front pump wet end housing that the motor attaches to.
Reply
Will this seal plate fit our Pentair Whisperflo 30 pump? Our pump model is WF-30 and the pump’s part number is 011775. Thank you.
-WF-SERIES-074564-8ae5b613-cd1b-49a9-b876-a9a6f97fd235.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-WF-SERIES-074564-8ae5b613-cd1b-49a9-b876-a9a6f97fd235.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Custom Molded Products Seal Plate Compatible with Pentair WF series WhisperFlo Pumps - 074564")
Hello, yes this is the correct seal plate for the Pentair Whisperflo WF series pool pump.
Reply
what product do you use to seal the seal plate so water does not leak out
Reply
If you use a Seal Plate Gasket 357100 this will keep water from leaking out. This gasket is used on this particular seal plate 074565
Reply
Will this fit my pump? It seems like it is the correct one but wanted to verify before ordering.
Thanks
Yes this is the proper seal plate for the Whisperflo Pump in your photos.
Reply
Will this seal plate work for this model
Hello Ryan. The Custom Molded Products Seal Plate - WF Series - 074564 is compatible with your Pentair Pool Products Whisperflo Pool Pump model WFE-6. The Tune-Up Kit, GOKIT32, contains the seals and gaskets necessary to complete this project. Tune Up Kit Pentair/Purex Whisperflo - GOKIT32
Reply
Will this seal plate fit a wfe-28 motor?
Reply
Thank you for contacting Inyo Pools, Yes this seal plate will work. I would also recommend Tune Up Kit Pentair/Purex Whisperflo - GOKIT32 or if you have a salt system Tune Up Kit Pentair/Purex Whisperflo Saltwater - GOKIT32SALT
Reply
Will this seal plate fit a wfe-28 motor?
Reply
Thank you for contacting Inyo Pools, Yes this seal plate will work. I would also recommend Tune Up Kit Pentair/Purex Whisperflo - GOKIT32 or if you have a salt system Tune Up Kit Pentair/Purex Whisperflo Saltwater - GOKIT32SALT
Reply
-WF-SERIES-074564.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-WF-SERIES-074564.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Custom Molded Products Seal Plate Compatible with Pentair WF series WhisperFlo Pumps - 074564")
-WF-SERIES-074564.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-WF-SERIES-074564-fcc11edf-51d7-4874-b32b-26a1241cc991.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-WF-SERIES-074564.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Custom Molded Products Seal Plate Compatible with Pentair WF series WhisperFlo Pumps - 074564")
-WF-SERIES-074564-fcc11edf-51d7-4874-b32b-26a1241cc991.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Custom Molded Products Seal Plate Compatible with Pentair WF series WhisperFlo Pumps - 074564")