Part # W3SP1775
Self-Priming Pump Series
Power-Flo II is a high performance, low maintenance pump series available at an affordable price. For above-ground and in-ground pools requiring self-priming action, Power-Flo II is the pool professional's choice for superior performance and unparalleled quality.
|Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)|
|Model Number||10 ft||20 ft||30 ft||40 ft||50 ft|
|1 Year Warranty On Strainer Housing.
1 Year Warranty On Motor.
Click here for more Hayward Pool Pumps
I would like to replace my Hayward pump 3/4 for my pool waterfall. Attached is the picture of the old pump and prefer to be Hayward. Thanks.
Hi Jonathon, could you send us a few photos of your pump? Please take a wide shot of the complete pump to include the pipes going in and out of the pump and its label showing the model number if possible. To supply photos simply click the reply link below and upload your photos or quickest using our live online chat feature. Once we get those photos we can make the proper recommendation.
Attached is the pictures of the pool pump.
Hi. What pump/filter would you recommend for a small rectangular inground pool with an estimated 6500 gallon water. Thank you!
I have this pump Sp2705x7, it has a 3/4 HP motor, what should I get for a replacement, trying match the existing pump as close as possible to minimize changes to my pvc
The part number we have CF11-N1 3/4A other number is a 1-17-F04/ 34-3232 will this pump work on this exchange?
Hi. Unfortunately, this pump will not work as a replacement because it's an above ground pool pump. The Pentair Challenger 3/4 HP 115/230V UR Pump - 343232 is the exact replacement.
What is the proper enclosure for this pump to protect against weather, etc.? I.e. what vendor and part number?
I want to use this to replace a SP1575, for which the discharge had been rotated to horizontal. Can I do the same with this pump, via removal/replacement of the pump/motor bolts?
Yes, you are able to rotate the wet end to make it a horizontal discharge.
This pump says it can be used for small inground pools,how small is small and can the cord from my old Hayward 3/4 pump be used.
Jeanne- The size pool that you can use the Hayward Power-Flo II 3/4 HP Single Speed Pump Part # SP1775 would depend on the Average feet of head in your pool.
I ordered and received pump Hayward SP1775 for a small in ground pool based on your ad. I now read that this pump is only for above ground pools. please advise.
The pump may be used for both application. I have include the Hayward Brochure for this model - https://www.hayward-pool.com/pdf/literature/PowerFloII_Brochure.pdf I hope this answers your question.
Is the Power-Flo II equipped with a power cord?
No, the power cord is sold separately. Here is a link to the power cord. http://www.inyopools.com/Products/07501352015032.htm
(3 out of 5 stars) spa pump
Reviewed By: the spameister from Santa Monica ()
Pros: Cheaper & quieter than my old one
Cons: pump housing is plastic
The pump housing is plastic & is connected to the strainer basket (also plastic) with a plastic nipple. The nipple broke off during shipping. However, it was quickly replaced with a new unit!