Part # CT1102
Warranty 1 Year
Alternate Part #'s 17037, 186916, 19148, 327P563, 3K114, 52010, 6K877, 89148, 91713, B654, B724, C1488, C48L2DB11A4, CT1012 AOS (MISPRINT), CT1102, CT210CE, EB654, ECT1102, JD10FL1E, K48K2N103, K48L2N100A1, K48L2N104, K48L2N105, K48L2N105A1, MFK-19148, SP1610Z1BE, SP1610Z1BEE, SPX1610Z1BEE, 35-126-3060, AOS-60-5211, CRMCT1102
Voltage 115/230, Max Amps 115V = 13.6 230V = 6.8, Single Speed, Round Flange, RPM = 3450, Threaded Shaft, Frame = 56J Used on the following FULL RATE ENERGY EFFICIENT models: Hayward Super II Energy Efficient, Hayward Northstar Full Rate and Jacuzzi Magnum Full Rate pumps.
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Option:
What is Service Factor?
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Why do I need to purchase a new shaft seal?
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Why should I purchase a Tune Up Kit?
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
(5 out of 5 stars) Great so far
Reviewed By: Radiomd1 from Temperance, MI ()
Pros: More efficient despite more muscle.
Easily installed, more efficient replacement motor for our old Hayward Superpump. Reasonably quiet. Also slightly more powerful (same 1hp but service factor (SF) is 1.4, for a true hp of 1.4, compared to true hp of 1.1 for the motor we replaced.
(5 out of 5 stars) Great replacement motor for Hayward Super II
Reviewed By: Inyo Customer ()
Long story short, motor died on my Hayward Super II (close to 10 year old with one repair from professional (capacitor blew) over its lifetime). Same issue this time around. contemplated on getting another pro to replace it but knew it would cost me a lot more. I decided to replace the whole motor and looked around and saw the parts in Inyopools which ended up being the cheapest I saw. Looked up the inyopool instructions on youtube (and another one specific to my pump) and looked fairly easy enough. Ordered this as well as the Tune Up kit (good decision since my O-Rings where dried up and cracked). Everything came earlier than expected and in good condition (good packaging). Installation was easy (not really much of DIY person). Videos on youtube definitely helped, the thing that took me the longest was taking my old motor apart, bolts where on there tight. After I got it apart, putting the new one took me only a few minutes. This new pump is really quiet, can hardly hear it when it's running. Been running for more than a week and so far no complaints. Replacing it myself definitely saved me money!
(5 out of 5 stars) Energy efficient replacement for std motor
Reviewed By: Michael S. from Phoenix, AZ ()
Pros: Energy efficient motor vs standard replacement
Motor fit perfectly, a better value for the motor with lower amp rating for the same HP. The local pool store only had the standard higher AMP motors. Figure I will make the cost difference back in 1 season.