$295.00

Qty:

By Century Motors


Details

Top

Part # UCT1102

Warranty 1 Year

Alternate Part #'s 10-184948-22, 184948, K48A82A04, K48K2N100A2, K48K2N104, UCT1102, AOSUCT1102, CRMUCT1102

Product Description

Replace your  Pump Motor with an Energy Efficient model UCT1102.  Our Energy Efficient UCT1102 replacement motor cost roughly 33% less to operate than the standard UST1102  replacement motor.  In most states you will recoup the cost difference between the standard motor and Energy Efficient Motor within 4-6 months.

Voltage 115/230, Max Amps 115V = 11.0 230V = 5.5, Single Speed, Round Flange, RPM = 3450, Threaded Shaft, Frame = 56J

Used on the following models: Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum pumps.

Note: NOT California Title 20 Compliant. 

California Title 20 Compliant Option:

 

Motor Dimensions Motor Dimensions
Motor Image Motor Image

Product Specifications

HP:
1.0 HP
Frame:
56J
Volts:
115/230 V
Speed:
Single
Amps:
11.0/5.5 amp
Service Factor:
1.0
Total HP:
1.0 HP
Manufacturer:
Century (A.O. Smith)
Shaft:
Threaded
Flange:
Round
RPM:
3450 RPM
Phase:
Single
Commonly Used On:
Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum
Top

?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


?     Asked on 1/12/2012by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/12/2012by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/18/2012by Guest

I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help. 
 Reply


?     Asked on 1/19/2012by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Adjustable Wrench

Motor was not working.

Written on 5/11/2020 by Guest

Motor was replaced by ordering the same motor sold by Inyo pool. Easy Installation.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Pliers, Socket Set

1     0

My Hayward repayment motor stoped working

Written on 4/26/2018 by Guest

I simply took a picture of the label and sent it to INYO pool and they emailed me a couple of mothers to choose from with detailed instructions , I even called to ask a couple of questions and the lady on the phone was so helpful

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.84  out of 5 stars)
53 Rating
5 star:
 
(47)
4 star:
 
(5)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Recent Reviews